Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Routing design of tree‐shaped local public communication networks with high reliability and low cost

This paper discusses reliability problems for local public communication networks such as cable television networks and the subscriber‐loops of telecommunication networks. They have tree‐shapes and expand continuously as new customers join. By introducing a simple model, it is shown that most principal reliability measures and cost measures for such networks can be described through the networks' graphical characteristic quantities. Extensive simulations show that the prior provision of trunk pipes and a suitable choice of the route selecting rule for new customers are effective in constructing a highly reliable network with low cost. This revised version was published online in June 2006 with corrections to the Cover Date.     

A differential photoconductive AND gate with Be-dopedlow-temperature-grown InGaAs-InAlAs MQW MSM-PD's

A novel photoconductive AND gate that overcomes the problems of: 1) the long tail of photoconductive switches and 2) signal leakage via switch capacitance (signal feedthrough) is proposed. We use Be-doped low-temperature (LT)-grown InGaAs-InAlAs MQW metal-semiconductor-metal photodetectors (MSM-PD's) to get a shorter turn-off time and propose a differential AND gate to cancel the signal feedthrough. A comparison between LT-grown MSM-PD's and those fabricated by ion implantation shows that the LT-grown ones are ultrafast with a full width at half maximum of 5.3 ps and are suitable for low-bias operation. It is experimentally confirmed that the differential AND gate completely cancels the signal feedthrough in the picosecond region. The differential AND gate: with the LT MSM-PD's achieves return-to-zero (RZ) 20 Gb/s AND operation     

Athermal silica-based arrayed-waveguide grating multiplexer

A temperature dependent channel wavelength shift in a silica-based arrayed-waveguide grating multiplexer is successfully suppressed from 0.95 to 0.05 nm in the 0-85°C temperature range, which means that it can be used in practical WDM systems without the need for temperature control     

High-Speed TDM–WDM Techniques for Long-Haul Submarine Optical Amplifier Systems

Optical amplifier techniques have led to the installation of large-capacity submarine systems and further capacity increases seem likely. This paper reviews the FSA submarine system, which flexibly operates at both 2.5 and 10 Gb/s and offers maximum transmission capacity of 60 Gb/s for commercial use. The system configuration as well as its characteristics and upgradability will be introduced, including measurement results on time-division-multiplexing/wavelength-division-multiplexing (TDM–WDM) transmission at bit rates of 10 and 20 Gb/s using non-return-to-zero or soliton pulses. To further increase transmission capacity, TDM–WDM techniques that permit more than 10 Gb/s signal transmission in each data channel should be developed. Thus, pulse formats, which include non-return-to-zero, return-to-zero, or soliton pulses, and dispersion allocation in transmission fibers are significant issues. We introduce and discuss our recent results from high-speed (10 to 40 Gb/s) TDM–WDM signal transmission experiments with regard to the above aspects.     

On-line control of feed-speed in circular sawing

An adaptive control optimization system was developed to produce a desired surface finish roughness by automatic control of the work-piece feed-rate in circular sawing. The system developed in this study consists of the interconnection of an adaptive controller with a numerically controlled circular saw. The AE signals and cutting forces were measured to monitor the machining process continuously in this system. The signals were provided to the adaptive controller to evaluate the surface finish roughness and adjust the workpiece feed-rate automatically in the machining process. Sensing of AE signals and of cutting forces was compared to determine which technique is more convenient. Experiments were carried out with a carbide-tipped circular saw. Cross cutting was done with counter-cutting during the experiments. The cutting parameters controlled were workpiece feed-rates and cutting speeds. Japanese beech (Fagus crenata Blume) and Yezo spruce (Picea jezoensis Carr.) were used as the workpiece. Experimental results indicated that adaptive control optimization took place in the system developed for circular sawing. The desired surface finish roughness was produced by automatic control of the workpiece feed-rate using the sensing technique of AE signals as well as that of cutting force. However, the system using AE signals is more convenient than taht using cutting force.     

An optically clocked transistor array with dual serial-to-parallel and parallel-to-serial conversion capability for optical label swapping

We propose an optically clocked transistor array optoelectronic integrated circuit (OEIC) for both serial-to-parallel and parallel-to-serial conversion (demux/mux), enabling an interface between high-speed asynchronous burst optical labels and CMOS circuitry for optical label swapping. Dual functionality of the OEIC reduces size, power, and cost of the optical label swapper. The capability for greater than 20-Gb/s conversion operation is demonstrated.     

Optical neurochip with learning capability

A dynamic optical neurochip with variable synaptic interconnection capability has been reported. A novel type of photodetector called a variable sensitivity photodetector has been developed for the synaptic interconnection of neural networks. It utilizes a metal-semiconductor-metal structure whose quantum efficiency can be modulated by an applied bias voltage. The fabricated dynamic optical neurochip consists of an 8×8 variable sensitivity photodetector (VSPD) array and an 8 line-shaped LED array. It is shown that this device is suitable for learning in neural networks. The application to pattern classification is demonstrated     

Ozonation of Several Organic Compounds Having Low Molecular Weight under Ultraviolet Irradiation

Ozonation of several low molecular weight organic compounds under ultraviolet irradiation was studied. Nine compounds were identified as reaction products of the ozonation of phenol which was promoted by the simultaneous use of ozone and ultraviolet irradiation. In the case of several organic compounds having carbon numbers from one to six, the removal of total organic carbon (TOC) by this simultaneous use was higher than by either the ozone oxidation method or the ultraviolet irradiation method for all the compounds.     

Detection and Quantitation of Left-to-Right Shunts from Radionuclide Angiocardiography Using the Homomorphic Deconvolution Technique

The homomorphic filtering method is described for the detection and quantitation of left-to-right shunts from radionuclide angiocardiography. First, the method is investigated theoreticatly and numerically using a realistic model with systemic recirculation. It is demonstrated that even in a noisy situation the shunt flow fraction can be relatively well estimated, if only the characteristics of the fiters used are suitable. Second, the method is applied to real data, i.e., the pulmonary time-activity curves from radionucUde anglocardiography. The presence or absence of a left-to-right shunt is determined using the ratio AT/MTT. The pulmonary-to-systemic flow ratios calculated from the areas of the two decomposed curves are compared with those from oximetry at cardiac catheterization. Good agreement between the Qp/Qs ratios calculated by oximetry and radionucUide angiocardiography is obtained.