Effects of Enantiomeric Blend of Verbenone on Response ofIps paraconfusus to Naturally Produced Aggregation Pheromone in the Laboratory

The aggregation pheromone produced by maleIps paraconfusus (Coleoptera: Scolytidae) tunneling in Monterey pine,Pinus radiata, logs was trapped on Porapak Q. A concentration of an extract of trapped volatiles that attracted beetles was determined in the laboratory through a concentration–response analysis of walking behavior of males and females. The interruptant effects of four concentrations of verbenone on response to a constant concentration of this naturally produced aggregation pheromone were tested with males and females. Independent of its enantiomeric composition [99.5% (S)-(–), 93.1 % (S)-(–), and 98.3% (R)-(+)], verbenone significantly reduced the percentage of females (but not males) reaching the attractant source. However, when the time required for beetles of both sexes taken together to reach the attractant source was considered, verbenone of higher enantiomeric purity had a greater effect on beetle behavior. Solutions of 99.5% (S)-(–)- and 98.3% (R)-(+)-verbenone increased the time required for beetles to reach the attractive source when compared to 93.1% (S)-(–)-verbenone. When pooled across enantiomeric blends, increasing concentrations of verbenone resulted in slower responses in beetles that reached the attractant source within 2 min. Males and females did not respond to verbenone alone.     

Combinatorial Measurement of CDKN1A/p21 and KIF20A Expression for Discrimination of DNA Damage-Induced Clastogenicity

In vitro mammalian cytogenetic tests detect chromosomal aberrations and are used for testing the genotoxicity of compounds. This study aimed to identify a supportive genomic biomarker could minimize the risk of misjudgments and aid appropriate decision making in genotoxicity testing. Human lymphoblastoid TK6 cells were treated with each of six DNA damage-inducing genotoxins (clastogens) or two genotoxins that do not cause DNA damage. Cells were exposed to each compound for 4 h, and gene expression was comprehensively examined using Affymetrix U133A microarrays. Toxicogenomic analysis revealed characteristic alterations in the expression of genes included in cyclin-dependent kinase inhibitor 1A (CDKN1A/p21)-centered network. The majority of genes included in this network were upregulated on treatment with DNA damage-inducing clastogens. The network, however, also included kinesin family member 20A (KIF20A) downregulated by treatment with all the DNA damage-inducing clastogens. Downregulation of KIF20A expression was successfully confirmed using additional DNA damage-inducing clastogens. Our analysis also demonstrated that nucleic acid constituents falsely downregulated the expression of KIF20A, possibly via p16 activation, independently of the CDKN1A signaling pathway. Our results indicate the potential of KIF20A as a supportive biomarker for clastogenicity judgment and possible mechanisms involved in KIF20A downregulation in DNA damage and non-DNA damage signaling networks.     

Compositional Dependence of Normal Spectral Emissivity of Molten Cu-Fe Alloy

Metallurgical and Materials Transactions B - Normal spectral emissivity of molten Cu-Fe alloy with different compositions was measured at the wavelength of 807 nm using an electromagnetic...     

The result of a wall failure in-pile experiment under the EAGLE project

The WF (wall failure) test of the EAGLE program, in which 2 kg of uranium dioxide fuel-pins were melted by nuclear heating, was successfully conducted in the IGR (Impulse Graphite Reactor) of NNC/Kazakhstan. In this test, a 3 mm-thick stainless steel (SS) wall structure was placed between fuel pins and a 10 mm-thick sodium-filled channel (sodium gap). During the transient, fuel pins were heated, which led to the formation of a fuel-steel mixture pool. Under the transient nuclear heating condition, the SS wall was strongly heated by the molten pool, leading to wall failure. The time needed for fuel penetration into the sodium-filled gap was very short (less than 1 s after the pool formation). The result suggests that molten core materials formed in hypothetical LMFBR core disruptive accidents have a certain potential to destroy SS-wall boundaries early in the accident phase, thereby providing fuel escape paths from the core region. The early establishment of such fuel escape paths is regarded as a favorable characteristic in eliminating the possibility of severe re-criticality events. A preliminary interpretation on the WF test results is presented in this paper.     

Normal Spectral Emissivity Measurement of Molten Cu–Co Alloy Using an Electromagnetic Levitator Superimposed with a Static Magnetic Field

The normal spectral emissivity of molten Cu–Co alloy with different compositions was measured in the wavelength range of 780 nm to 920 nm and in the temperature range of 1430 K to 1770 K including the undercooled condition by an electromagnetic levitator superimposed with a static magnetic field. The emissivity was determined as the ratio of the radiance from a levitated molten Cu–Co droplet measured by a spectrometer to the radiance from a blackbody calculated by Planck’s law at a given temperature, where a static magnetic field of 2.5 T to 4.5 T was applied to the levitated droplet to suppress the surface oscillation and translational motion of the sample. We found little temperature dependence of the normal spectral emissivity of molten Cu–Co alloy. Concerning the composition dependence, the emissivity decreased markedly above 80 at%Cu and reached that of pure Cu, although its dependence was low between 20 at%Cu and 80 at%Cu. In addition, this composition dependence of the emissivity of molten Cu–Co alloy can be explained well by the Drude free-electron model.     

Bioconversion of 1-adamantanol to 1,3-adamantanediol using Streptomyces sp. SA8 oxidation system

To efficiently produce 1,3-adamantanediol (1,3-ad(OH)₂) from 1-adamantanol (1-adOH), our stocks of culture strains and soil microorganisms were surveyed for hydroxylation activity towards 1-adOH. Among them, the soil actinomycete SA8 showing the highest hydroxylation activity was identified as Streptomyces sp. based on 16S ribosomal DNA sequence analysis. The reaction products were purified by silica gel column chromatography, and from NMR and MS analyses, they were identified as 1,3-ad(OH)₂ and 1,4-ad(OH)₂. Streptomyces sp. SA8 produced 5.9 g l^? 1 1,3-ad(OH)₂from 6.2 g l^? 1 1-adOH in culture broth after 120 h at 25 °C. Using resting cells, 2.3 g l^? 1 1,3-ad(OH)₂ was produced after 96 h of incubation at a 69% conversion rate. In both cases, 1,4-ad(OH)₂ was formed as a byproduct at a rate of about 15%. Strain SA8 also hydroxylated 2-adamantanol and 2-methyl-2-adamantanol.     

Two-degree-of-freedom robust speed controller for high-performancerolling mill drives

A scheme is presented for the speed control of rolling mill drives. The proposed speed controller is based on a two-degree-of-freedom (TDF) structure and uses an observer-based state feedback compensator for the major control loop. The control method yields a robust system with respect to system uncertainties and modeling errors and is very effective for vibration suppression. Experimental verification was carried out on a prototype rolling mill minimodel system. The experimental drive system has a three-mass-model structure (motor-gear-load) connected by low stiffness shafts. The mechanical resonances and the inertia ratios between the motor, gear, and load are comparable to those of an actual rolling mill system (resonant frequencies are at 17.4 Hz and 51.3 Hz). The proposed scheme was compared to the conventional PI controller and the performance of each scheme is presented. A high closed loop speed bandwidth was obtained with the proposed TDF speed controller     

Active centers, catalytic behavior, symbiosis and redox properties of MoV(Nb,Ta)TeO ammoxidation catalysts

Selective as well as waste forming active centers were defined for MoVNbTeO and MoVTaTeO catalysts in the ammoxidation of propane to acrylonitrile and all catalytic functionalities were assigned to specific elements at the respective active centers. Symbiosis between M1 and M2 phases of these catalysts was observed, with phase cooperation being more extensive in the Nb than Ta containing compositions. The difference in catalytic effectiveness arises most likely because contact and surface area exposure of the two respective, cooperating phase pairs are not equal. The M1 phase of the catalysts is reducible by propane and ammonia in the absence of dioxygen and is regenerable to its original, fully oxidized state by dioxygen (air). No structural collapse is observed even after 120 C₃H₈ + NH₃ reduction pulses. The so induced reduction of the catalyst extends up to 70 layers deep. The product distribution over the first few pulses is very similar to that under catalytic conditions, supporting the concept that lattice oxygen is involved in the catalytic ammoxidation process. Therefore, the ammoxidation of paraffins is a redox process, as is of course the well-known olefin ammoxidation process.     

The RIKEN radioactive beam facility

A radioactive beam facility based on projectile fragmentation, RIPS, has been constructed at RIKEN to enable radioactive-beam experiments. The facility is characterized by the production of high-intensity beams and spin-polarized beams. Since the beginning of 1990, experiments on exotic nuclei have been extensively performed exploiting these useful features. The characteristics and the present status of the RIPS are described.