Interpolation of digital imagery using hypersurface approximation

An algorithm for interpolation by piece-wise polynomial approximation has been developed and implemented. The hypersurface approximation is carried out by a quadratic surface defined over a two dimensional space of the digital picture in the neighbourhood of the point to be interpolated using orthogonal polynomials as basis functions. The kernel for interpolation has been evaluated with the help of polynomial basis functions; this enables efficient implementation of the algorithm.     

Effect of M and M-Ca Substitution on the Structure and Superconductivity of GdBa2Cu3O7−δ [M = Mo, Hf ]

The structural and superconducting properties of (Gd_1?x?y Ca _y M _x )Ba₂Cu₃O _z with M = Mo, Hf are investigated using X-ray diffraction, electrical resistivity, and oxygen content measurements. The effect of increasing the Mo concentration in (Gd_1?x Mo _x )Ba₂Cu₃O _z changes the structure from orthorhombic to tetragonal accompanied by a large increase in resistivity and a fast decrease in T _c at the rate of 1.9 K per at.% of Mo, unlike that of Hf substitution in (Gd_1?x Hf _x )Ba₂Cu₃O _z , which maintains the orthorhombic structure and decreases T _c very slowly at the rate of 0.6 K per atm.% of Hf with nearly no change in resistivity. The suppression of T _c by M = Mo, Hf can be counterbalanced by hole doping by Ca which increases T _c with increasing Ca content showing maximum compensation for Mo. A comparative study of M = Mo, Hf doped samples in (Gd_1?x?y Ca _y M _x )Ba₂Cu₃O _z indicates that the valence of the dopant M = Mo^4+,6+, Hf⁴⁺ and its ionic radius play an important role in controlling the structural and superconducting properties of the systems.     

Characterization and Performance of AlTiN,AlTiCrN, TiN/TiAlN PVD Coated Carbide Tools While Turning SS 304

This study presents the physical, mechanical properties and dry turning performance of AlTiN, AlTiCrN, and TiN/TiAlN coatings produced on K-grade tungsten carbide insert by advanced physical vapor deposition technique. Scanning electron microscopy, microhardness tester, and scratch tester were used to examine surface morphology, coating thickness, microstructure, microhardness, and adhesion of coating. The performance in terms of cutting force and temperature of AlTiN, AlTiCrN, and TiN/TiAlN coated inserts was evaluated while dry turning of SS 304 steel. SS 304 is considered as “difficult-to-cut” material due to its exotic properties. The experiments were conducted at cutting speed of 140, 200, 260, and 320 m/min. Feed and depth of cut were kept constant and their values were 0.20 mm/rev and 1 mm, respectively. Experimental observations depicts that AlTiCrN coated insert demonstrated better performance because of its good adhesion and high oxidation resistance followed by TiN/TiAlN coated insert. TiN/TiAlN coated insert exhibited higher cutting temperature than AlTiCrN and AlTiN coated inserts. The findings of the study should also provide economic machining solution in case of dry turning of SS 304 stainless steel.     

Photocatalytic degradation of dyes and organic contaminants in water using nanocrystalline anatase and rutile TiO2

Nanocrystalline TiO₂ was synthesized by controlled hydrolysis of titanium tetraisopropoxide. The anatase phase was converted to rutile phase by thermal treatment at 1023 K for 11 h. The catalysts were characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), Fourier-transform infrared absorption spectrophotometry (FT-IR) and N₂ adsorption (BET) at 77 K. This study compare the photocatalytic activity of the anatase and rutile phases of nanocrystalline TiO₂ for the degradation of acetophenone, nitrobenzene, methylene blue and malachite green present in aqueous solutions. The initial rate of degradation was calculated to compare the photocatalytic activity of anatase and rutile nanocrystalline TiO₂ for the degradation of different substances under ultraviolet light irradiation. The higher photocatalytic activity was obtained in anatase phase TiO₂ for the degradation of all substances as compared with rutile phase. It is concluded that the higher photocatalytic activity in anatase TiO₂ is due to parameters like band-gap, number of hydroxyl groups, surface area and porosity of the catalyst.     

Synergistic Gating of Electro‐Iono‐Photoactive 2D Chalcogenide Neuristors: Coexistence of Hebbian and Homeostatic Synaptic Metaplasticity

Emulation of brain‐like signal processing with thin‐film devices can lay the foundation for building artificially intelligent learning circuitry in future. Encompassing higher functionalities into single artificial neural elements will allow the development of robust neuromorphic circuitry emulating biological adaptation mechanisms with drastically lesser neural elements, mitigating strict process challenges and high circuit density requirements necessary to match the computational complexity of the human brain. Here, 2D transition metal di‐chalcogenide (MoS₂) neuristors are designed to mimic intracellular ion endocytosis–exocytosis dynamics/neurotransmitter‐release in chemical synapses using three approaches: (i) electronic‐mode: a defect modulation approach where the traps at the semiconductor–dielectric interface are perturbed; (ii) ionotronic‐mode: where electronic responses are modulated via ionic gating; and (iii) photoactive‐mode: harnessing persistent photoconductivity or trap‐assisted slow recombination mechanisms. Exploiting a novel multigated architecture incorporating electrical and optical biases, this incarnation not only addresses different charge‐trapping probabilities to finely modulate the synaptic weights, but also amalgamates neuromodulation schemes to achieve “plasticity of plasticity–metaplasticity” via dynamic control of Hebbian spike‐time dependent plasticity and homeostatic regulation. Coexistence of such multiple forms of synaptic plasticity increases the efficacy of memory storage and processing capacity of artificial neuristors, enabling design of highly efficient novel neural architectures.     

Dynamic phasor based frequency scanning for grid-connected power electronic systems

Frequency scanning is a method of obtaining the frequency response of a system by injecting a small-amplitude wide-band signal as an input in a time domain simulation of the system. This is an alternative to analytical derivation of small-signal models, especially for complex grid-connected power electronic systems (PESs). These models are required for the study of adverse interaction of PES with lightly damped oscillatory modes in a power system. The use of the frequency scans for conventional small-signal stability analysis is predicated upon the time-invariance of the underlying model. Since PES are generally time-periodic, time-invariance may be achieved in some transformed variables. Although the DQ transformation is suitable in many situations, it is not so for systems with low-order harmonics, individual-phase schemes, unbalanced or single-phase systems, and PES with negative-sequence controllers. This paper proposes the use of dynamic phasor variables in such situations since the underlying model in these variables is time-invariant. The procedure for dynamic phasor based scanning is, however, intricate because wide-band signal injection results in the simultaneous presence of harmonic dynamic phasor components. The paper outlines this procedure and presents illustrative case studies of Thyristor Controlled Series Compensator (TCSC) and STATCOM. For the TCSC, a comparison of the frequency response obtained from the scanning method and the one obtained from an approximate analytical dynamic phasor model is also presented.     

Lacrimal gland inflammation is responsible for ocular pathology in TGF-beta 1 null mice

Mice homozygous for a nonfunctional transforming growth factor-beta 1 gene develop rampant inflammation in vital organs that contributes to a shortened life span. The presence of circulating anti-nuclear anti-bodies, immune deposits in tissues, leukocyte infiltration, and increased major histocompatibility complex antigen expression resembles an autoimmune-like syndrome. One of the overt symptoms that appears in these mice lacking transforming growth factor-beta 1 is the development of dry crusty eyes that close persistently as their health declines. Histologically, the eyes appear normal with little or no inflammation. However, inflammatory lesions, predominantly lymphocytic, develop in the lacrimal glands, disrupting their structure and function and severely limiting their ability to generate tears. This histopathology and aberrant function mimic that of Sj?gren's syndrome, a human autoimmune disease characterized by dry eyes and dry mouth. Impeding the leukocyte infiltration into the glands with synthetic fibronectin peptides, which block adhesion, not only prevents the inflammatory pathology but also prevents the persistent eye closure characteristic of these mice.     

Sampling and processing of color signals

Digital signal processing tools are used to determine the proper sampling of color spectra and the effect of sampling on the accuracy of derived properties such as CIE tristimulus values and color rendering indexes. It is found that 10 nm sampling is adequate for most applications, but not for more exacting textile and paint matching applications. Special methods are proposed to treat the cases of color signals with delta function components such as fluorescent lights.     

Model-based reconstruction of multiple circular and ellipticalobjects from a limited number of projections

We consider tomographic image reconstruction from a limited number of noisy projections. An efficient algorithm based on maximum likelihood estimation (MLE) is developed to reconstruct images of multiple discs with unknown locations and radii. The algorithm is successfully applied to images with signal-to-noise ratio (SNR) as low as 0 dB, using as few as 16 projections, and containing as many as twelve discs with widely varying radii. Experimental results show that our approach significantly outperforms conventional convolution back projection. The algorithm is successfully extended to the multiple ellipse case.