Network architecture for optical path transport networks

This paper proposes a new layered transport network architecture on which the WDM optical path network can be effectively created. The optical path network will play a key role in the development of the transport network that will realize the bandwidth-abundant B-ISDN. This paper extends the layered transport network architecture described in ITU-T Recommendation G.803 which is applied in existing SDH networks. First, we elucidate an application example of WDM optical path networks. Next, we propose a new layered architecture for WDM-based transport networks that retains maximum commonality with the layered architectures developed for existing B-ISDN networks. The proposed architecture is composed of circuit layer networks, electrical path layer networks, optical layer networks, and physical media (fiber) networks. The optical layer is divided into an optical path layer and an optical section layer. The optical path layer accommodates electrical paths. Optical section layer networks are divided into optical multiplex section (OMS) layer networks and optical repeater section (ORS) layer networks. The OMS layer network is concerned with the end-to-end transfer of information between locations transferring or terminating optical paths, whereas the ORS layer is concerned with the transfer of information between individual optical repeaters. Finally, a detailed functional block model of WDM optical path networks, the function allocation of each layer, and an optical transport module (OTM) are developed     

Dynamic bandwidth control of the virtual path in an asynchronoustransfer mode network

The virtual path concept has several valuable features to construct an economical and efficient asynchronous transfer mode (ATM) network. One of them is bandwidth control which affords transmission efficiency improvement through statistical sharing of capacity. An effective bandwidth control algorithm and its calculated performance are described. Network performance with the algorithm is evaluated, and the bandwidth control is shown to successfully improve network transmission efficiency with only a slight increase in processing load compared to the fixed bandwidth scheme. A method is also proposed to equalize call loss probability for each virtual path. The effectiveness of the method is demonstrated by analysis     

A 1.5-V full-swing BiCMOS logic circuit

A BiCMOS logic circuit applicable to sub-2-V digital circuits has been developed. A transiently saturated full-swing BiCMOS (TS-FS-BiCMOS) logic circuit operates twice as fast as CMOS at 1.5-V supply. A newly developed transient-saturation technique, with which bipolar transistors saturate only during switching periods, is the key to sub-2-V operation because a high-speed full-swing operation is achieved to remove the voltage loss due to the base-emitter turn-on voltage. Both small load dependence and small fan-in dependence of gate delay time are attained with this technique. A two-input gate fabricated with 0.3-μm BiCMOS technology verifies the performance advantage of TS-FS-BiCMOS over other BiCMOS circuits and CMOS at sub 2-V supply     

The process dependence on positive bias temperature aginginstability of p+(B) polysilicon-gate MOS devices

During positive bias temperature (BT) aging, a large number of interface traps on p⁺(B) polysilicon MOS devices are generated in the upper half of the bandgap without an increase in the charges trapped in the gate oxide. The increase in interface traps can be reduced by processes which exclude the hydrogen included during fabrication. The increase in the interface-state density is explained as follows. The generation of the interface traps is caused by hydrogen ions reaching at the SiO₂/Si interface through the gate oxide from the polysilicon-gate electrode. The hydrogen ions combine with activated boron and are released from the boron under positive BT aging. The increase in interface traps is formulated by equations which are derived from the above model     

Application of finite-element method to H-plane waveguide discontinuities

The finite-element method has been applied to the scattering by an inhomogeneous H-plane discontinuity of arbitrary shape in a rectangular waveguide. As an example of the method, a right-angle corner bend and a waveguide-type dielectric filter are considered. Our results agree well with earlier theoretical and experimental results.     

Germanium-oxide glass optical fibre prepared by VAD method

Germanium-oxide glass optical fibre doped with antimony for transmission of the 2 to 3 ?m band has been prepared by the vapour-phase axial deposition (VAD) method. An attenuation loss of 13 dB/km at 2.05 ?m and 70 dB/km at 2.4 ?m has been achieved.     

New type of tin support for hydroprocessing catalyst

TiN supported molybdenum sulfide catalysts showed much higher activity for cleavage of C-C bonds than oxide supported molybdenum sulfide catalysts, indicating the possibility of a new generation of supports for hydroprocessing catalysts.     

Frequency shift of a GaAlAs diode laser in a magnetic field

The oscillation frequency shift of a GaAlAs diode laser under a magnetic field at room temperature is reported. In this experiment the observed frequency shift is 500 MHz to the low-frequency side at the magnetic flux density of 1.4 T, and shows the quadratic dependence on the magnetic flux density.     

IR reflection spectra of the silicate surface layer of yellowed rice plant leaf

We have investigated the IR reflectional properties of the three-hold cytrogical surface layer (kutchikura layer on silicate layer n(SiO₂) on silicate cellulose layer C₆H₁₀Si_xO_y) and that of chlorophyll, a(C₅₅H₇₂M_gN₄O₅) etc., present in bladder's cells by using our experimental method. From analysis of three set of anisotropical reflection spectra assigned as due to CO, SiO and NC surface oscillators contained in the cytrogical cells and measured at 2500 2200 cm^?1, 1200 700 cm^?1 and at 700 200 cm^?1 regions, we have confirmed some important results. One is their quantized directional distributions that of the numbers of fine step spectrum and that of the reflection integrals of these spectra. Here, that of the NC oscillators were found to distribute in pentagonal directions relating to the molecular structure of chlorophyll. Second, we confirmed the pecularity of eight fine step-series measured in these sensitive spectra comparing with that of bamboo's seven series. Third, from analysis of the stepnized variation of the “reflection integrals”, we estimated the origin of this effect as which is presumably due to statistical, transfer of the 2p₄ valence electrons etc. in the oxygen atoms from C=O, Si=O double bonding side upto the shallower quantized states, E(N,J) which were formed softly around the and surface oscillators. And these surface oscillators were confirmed as to make photo-chemical reaction process by receiving energy higher than ～24 m eV especially under the illumination of sunshine etc.     

Field test results of multi-channel digital tv transmission at 15 and 30 Mb/s through an intelsat satellite using a PSK/FDMA system

This paper describes field test results of multi-channel digital TV transmission using a PSK/FDMA system and the related subjective test results of received TV pictures. The picture quality of the multi-channel 15 or 30 Mb/s transmission for both NTSC and PAL systems through the INTELSAT POR satellite are subjectively evaluated for various bit-error rates. In addition, subjective evaluations were made at various values of earth-station e.i.r.p. to compare the picture quality of digital transmissions with that of current half-transponder FM transmission.