基于ATR技术的有机聚合物二次电光系数的测量

二次电光效应是有机聚合物材料一种重要的电光特性,利用这种特性可以制备有机聚合物电光调制器等电光器件.有机聚合物材料的二次电光系数是衡量其二次电光效应的一个重要参数,其可以用一个6×6阶的张量来表示.利用该张量的对称特性、各个元素之间的已知关系以及折射率椭球公式,本文提出了一种基于衰减全反射(ATR)技术的测量有机聚合物二次电光系数的方法.在测量中,通过选用TM偏振光以及TE偏振光作为测量光束,可以分别获得二次电光系数张量中S11以及S12元素.利用已知关系,可以计算得到S44以及直流克尔系数.从而得到二电光系数张量中所有元素的值.     

基于Peercast的P2P直播系统改进

分析Peercast流媒体直播系统的结构。根据分析结果,指出其在实际网络应用中的弊端。改进下载流程,将单线程下载改为多线程下载,设计多线程F载任务分配模块。重新设计缓冲区,维护多对一情况F的缓冲区。介绍在多线程下载情况下直播延时方面的改进,对改进方案的性能进行分析。     

铝电解模糊控制系统的研究与应用

本文提出了一种自适应模糊控制方法．并应用在铝电解控制系统中。该方法将模糊控制函数的优化和模糊控制系统增益自适应调整集中于一体，可大大改善系统的品质和适应能力。仿真结论及应用表明．这种新型的模糊控制方法取得了良好的控制效果。     

Netfilter/Iptables框架下基于TCP滑动窗口的串行流量控制算法

传统的基于流量整形的流量控制算法通常需要建立对应的队列模型,实施起来极为复杂,而且所有数据包都要进入整形队列,加大了网络延时。本文从TCP协议拥塞控制和数据包组包机制出发,提出了基于TCP滑动窗口的串行流量控制算法,通过改变TCP发送端窗口的大小来达到流量控制的目的。本文在Linux内核Netfilter/iptables框架中实现了该流量控制方法,在部署的网络环境中,比较了不同参数设置下的算法效果。与CBQ算法相比,该方法降低了数据包在队列中排队整形的延时。     

QoS-aware placement of stream processing service

Many emerging online stream processing services require the consideration of quality of service (QoS), which is highly dependent on the placement of services at various hosts. This paper investigates the QoS-aware placement problems of stream processing services under different contexts. On condition that the client demands are stable, the QoS-aware placement problem aiming to minimize the cost when servers are CPU-uncapacitated, is equivalent to the set cover problem, and can be solved by a greedy algorithm with approximation factor O(log?n), where n is the number of clients. However, when CPU capacity constraints on servers are taken into account, the QoS-aware placement problem cannot be approximated unless P=NP. Therefore, we propose two heuristic algorithms: (1) ISCA (Iterated Set Cover-based Algorithm) and (2) KBA (Knapsack-Based Algorithm). We also consider the placement problem of client demands increasing over time. Two objectives, called extension factor and system lifetime, are proposed for demand increment-blind and increment-aware models respectively. Both of them can be solved by extending ISCA and KBA. The experimental results show that ISCA and KBA have distinct effects on different demand sizes. ISCA is more efficient when client demands are relatively small, while KBA performs better for larger demands.     

基于分段地址结构的快速路由查找算法

根据IPV6地址结构和骨干路由表特点,分析了原有路由查找算法,基于IPV6的掩码长度和分段地址,采用Hash表和多分支Trie树结构,提出了一种快速的IPV6路由查找算法。根据分段地址和掩码将最常用到的路由前缀按前缀长度设置Hash表,并将前缀值有序存放在表结点中。不仅可以进行前缀长度的二分查找,同时又是其它前缀匹配的索引。对于其他的前缀匹配问题,根据Hash表中的索引到相应的多分支Trie树完成最长前缀匹配。实践证明该算法具有较好的时空效率,可以较好地提高路由查找速度。     

元宝山电厂快控汽门的研究与实施

在分析和介绍元宝山电厂和辽西电网情况的基础上，着重介绍了对元宝山电厂３００ＭＷ机组实施快控汽门的研究、试验工作及主要的技术成果。该厂３００ＭＷ机组快控汽门方式的投入，提高了电网稳定性和经济效益。     

自动送粉激光熔覆装置及工艺研究

研制了一种工作稳定性好、粉末流量连续可调的自动送粉装置。经A_3钢表面激光熔覆WF-150不锈钢合金粉末的研究表明,所获得的激光熔覆层均匀连续、无宏观气孔和裂纹,粉末利用率高达94％。     

Effects of Tearing Conditions on the Crack Propagation in a Monolayer Graphene Sheet

The path of crack propagation in a graphene sheet is significant for graphene patterning via the tearing approach. In this study, we evaluate the fracture properties of pre-cracked graphene during the tearing process, with consideration of the effects of the aspect ratio, loading speed, loading direction, and ambient temperatures on the crack propagation in the monolayer sheet. Some remarkable conclusions are drawn based on the molecular dynamic simulation results, i.e., a higher loading speed may result in a complicated path of crack propagation, and the propagation of an armchair crack may be accompanied by sp carbon links at high temperatures. The reason for this is that the stronger thermal vibration reduces the load stress difference near the crack tip and, therefore, the crack tip can pass through the sp link. A crack propagates more easily along the zigzag direction than along the armchair direction. The out-of-plane tearing is more suitable than the in-plane tearing for graphene patterning. The path of crack propagation can be adjusted by changing the loading direction, e.g., a rectangular graphene ribbon can be produced by oblique tearing. This new understanding will benefit the application of graphene patterning via the tearing approach.     

基于需求响应的虚拟电厂多时间尺度优化调度

随着我国不断加快新型电力系统建设,风电、光伏等越来越多的分布式资源大规模并网,但其随机性、波动性及分散性的特点给电力系统带来了多重不确定性。提出了一种考虑价格型需求响应的虚拟电厂多时间尺度优化调度方法,在日内调度模型中引入用户价格型需求响应,对用户负荷进行精准调控;采用基于蒙特卡罗与曼哈顿概率距离的场景生成与削减法处理风光出力、电价不确定性,减少日前日内出力偏差,再结合日前调度构成了多时间尺度优化调度模型,并采用滚动优化得到日内优化调度结果。以湖南某小型虚拟电厂系统进行算例仿真,结果表明,所提多时间尺度优化调度策略能够精确预测风光出力及用户负荷,在有效抑制功率波动的同时保证了系统的经济性。