Development of the critical film thickness correlation for an advanced annular film mechanistic dryout model applicable to MARS code

It is generally assumed in the mechanistic film dryout model that the critical heat flux (CHF) arises when liquid film calculated from evaporation, droplet entrainment and deposition gets dryout. The dryout of film is usually assumed when film thickness becomes zero. However, it was indicated that the complete dryout assumption can estimate CHF well for uniform heating case but cannot simulate accurately for non-uniform heating case. The critical film thickness concept may be an appropriate approach physically because there is a possibility of instantaneous disappearance of liquid film when it gets very thin. Therefore, a critical dryout film thickness correlation was developed to properly model dryout phenomenon together with MARS code based on experimental data. The modified version of MARS implementing a newly developed critical dryout film thickness correlation was assessed using various dryout data including those of non-uniform heating case and flow reduction transient test. The prediction results showed improved agreement with the experimental data.     

Context Switching in a Run-Time Reconfigurable System

A distinguishing feature of reconfigurable computing over rapid prototyping is its ability to configure the computational fabric on-line while an application is running. Conventional reconfigurable computing platforms utilize commodity FPGAs, which typically have relatively long configuration times. Shrinking the configuration time down to the nanosecond region opens possibilities for rapid context switching and virtualizing the computational resources. An experimental context-switching FPGA, called the CSRC, has been created by BAE Systems, and gives researchers the opportunity to explore context-switching applications. This paper presents results obtained from constructing both control-driven and data-driven context switching applications on the CSRC device, along with unique properties of the run-time and compile-time environment.     

Striping and Scheduling for Large Scale Multimedia Servers

When designing a multimedia server, several things must be decided: which scheduling scheme to adopt, how to allocate multimedia objects on storage devices, and the round length with which the streams will be serviced. Several problems in the designing of large-scale multimedia servers are addressed, with the following contributions: (1) a striping scheme is proposed that minimizes the number of seeks and hence maximizes the performance; (2) a simple and efficient mechanism is presented to find the optimal striping unit size as well as the optimal round length, which exploits both the characteristics of VBR streams and the situation of resources in the system; and (3) the characteristics and resource requirements of several scheduling schemes are investigated in order to obtain a clear indication as to which scheme shows the best performance in realtime multimedia servicing. Based on our analysis and experimental results, the CSCAN scheme outperforms the other schemes. It is believed that the results ar     

Fuzzy disturbance observer approach to robust tracking control of nonlinear sampled systems with the guaranteed suboptimal H/sub /spl infin// performance

This paper presents a new approach to robust tracking control of the nonlinear sampled systems using a discrete-time fuzzy disturbance observer (DFDO). Novel update and control laws are proposed to guarantee that all the signals in the closed-loop control system are uniformly ultimately bounded (UUB) in a compact set. No persistence of excitation (PE) condition, nor the assumption on the slowness of the change of the fuzzy parameters, is required. In addition, a robustifying controller is designed to improve the tracking performance. Finally, a computer simulation example is presented to illustrate the effectiveness and the applicability of the suggested method.     

Robust Stable Fuzzy Control via Fuzzy Modeling and Feedback Linearization with Its Applications to Controlling Uncertain Single-link Flexible Joint Manipulators

In this paper, a robust stable fuzzy control design based on feedback linearization is presented. Takagi–Sugeno fuzzy model is used as representing the nonlinear plant model and uncertainty is assumed to be included in the model structure with known bounds. For this structured uncertainty, the closed system can be analyzed by applying the perturbation system stability analysis to the fuzzy feedback linearization systems and a sufficient condition is derived to guarantee the stability of the closed-loop system with bounded parameter uncertainties. Based on the developed analysis method, we can design a robust fuzzy controller by choosing the control parameters satisfying the robust stability condition.     

Electrostatic actuation of three-dimensional MEMS mirrors using sidewall electrodes

We propose and demonstrate electrostatic sidewall-electrodes actuation of three-dimensional (3-D) microelectromechanical systems (MEMS) gimbal mirrors. The linearity of the mirror angle dependence on actuation voltage is improved with the sidewall-electrodes actuation. In addition, the undesired spring-softening effect commonly found in electrostatic actuation, where the mirror resonance frequency decreases with increased tilt angle, is significantly reduced. Sidewall actuation enables superior performance of 3-D MEMS mirrors including large pull-in angles, reduced actuation voltages, improved device reliability, and fast switching times.     

Development of an expert system for cold forging of axisymmetric product

This paper deals with an automated computer-aided process planning and die design system by which the designer can determine operation sequences even if they have little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of four main modules. The process planning and the die design modules consider several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available multi-former, and the availability of standard parts. They can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. In the die design module optimal design technique and the horizontal split of the die insert were investigated for determining appropriate dimensions of components of the multi-former die set. It is suggested that the proposed method can be beneficial for improving the tool life of the die set in practice.     

A new parametric control method for freeform mesh models

Parametric modeling technology is difficult to apply to freeform mesh models since there is no efficient way to impose geometric constraints. In this paper, we propose a novel method to control freeform mesh models parametrically. Our approach is to construct a control mesh that surrounds an object model and then impose constraints on it. The control mesh is parametrically controlled and the shape of the object model is modified by using an existing freeform deformation method. This paper is mainly concerned with automated construction of a control mesh and treatment of geometric constraints. Procedures for creating a control mesh are as follows: 1) determine the optimal orientation of the model, 2) project the model along three axes and extract contours, 3) create 2D control polygons for the contours, and 4) construct the 3D control mesh from the 2D control polygons. Geometric constraints are imposed on the edges and faces of a control mesh. Types of constraints are given by either a relative relationship between elements or an absolute displacement. A new control mesh is calculated by solving these constraints and the original model is modified accordingly. We tested our algorithms for two freeform models.     

Superior–Subordinate Relationships in Korean Civil Engineering Companies

The Leader–Member Exchange (LMX) relationship quality between superiors and subordinates in Korean civil engineering companies were empirically examined for superiors’ feedback-seeking behaviors. The results showed that for superiors, affect, loyalty, and contribution toward subordinates were positively related to seeking negative as well as positive feedback from subordinates. From subordinates’ point of view, affect, contribution, and professional respect toward their superiors were positively related to superiors’ negative feedback seeking, but affect was negatively related to superiors’ positive feedback seeking. It was also found that superiors and subordinates were not consensual in LMX and superiors’ feedback-seeking behaviors. For example, for superiors, all of the four LMX dimensions were positively related to superiors’ asking subordinates directly for feedback, whereas for subordinates, none of the LMX dimensions were significantly related to superiors’ asking subordinates directly for feedback. These and other findings are discussed in detail, and implications for the findings are provided.