Modelling of abrasive particle energy in water jet machining

A phenomenological model of the three-phase flow inside an abrasive water jet machining cutting head has been developed. Several improvements over previously presented models such as taking into account the abrasive particle size distribution, and the effect of breakage of particles on the energy flux have been made. The model has been validated using an extensive set of experimental data with wide variations in cutting-head geometry, operating pressure, and abrasive mass flow rates. The cross-sectional averaged abrasive particle velocity at the exit of the focussing tube has been predicted with good accuracy over the whole range of experiments. In particular, the Pearson correlation between the model and the experimental results is found to be more than 95%, implying the utility of this model in design.     

The Role of Autophagy in Chemical Proteasome Inhibition Model of Retinal Degeneration

We recently demonstrated that chemical proteasome inhibition induced inner retinal degeneration, supporting the pivotal roles of the ubiquitin–proteasome system in retinal structural integrity maintenance. In this study, using beclin1-heterozygous (Becn1-Het) mice with autophagic dysfunction, we tested our hypothesis that autophagy could be a compensatory retinal protective mechanism for proteasomal impairment. Despite the reduced number of autophagosome, the ocular tissue morphology and intraocular pressure were normal. Surprisingly, Becn1-Het mice experienced the same extent of retinal degeneration as was observed in wild-type mice, following an intravitreal injection of a chemical proteasome inhibitor. Similarly, these mice equally responded to other chemical insults, including endoplasmic reticulum stress inducer, N-methyl-D-aspartate, and lipopolysaccharide. Interestingly, in cultured neuroblastoma cells, we found that the mammalian target of rapamycin-independent autophagy activators, lithium chloride and rilmenidine, rescued these cells against proteasome inhibition-induced death. These results suggest that Becn1-mediated autophagy is not an effective intrinsic protective mechanism for retinal damage induced by insults, including impaired proteasomal activity; furthermore, autophagic activation beyond normal levels is required to alleviate the cytotoxic effect of proteasomal inhibition. Further studies are underway to delineate the precise roles of different forms of autophagy, and investigate the effects of their activation in rescuing retinal neurons under various pathological conditions.     

The Short-Chain Fatty Acid Butyrate Attenuates Pulmonary Vascular Remodeling and Inflammation in Hypoxia-Induced Pulmonary Hypertension

Pulmonary hypertension (PH) is a progressive cardiovascular disorder in which local vascular inflammation leads to increased pulmonary vascular remodeling and ultimately to right heart failure. The HDAC inhibitor butyrate, a product of microbial fermentation, is protective in inflammatory intestinal diseases, but little is known regarding its effect on extraintestinal diseases, such as PH. In this study, we tested the hypothesis that butyrate is protective in a Sprague–Dawley (SD) rat model of hypoxic PH. Treatment with butyrate (220 mg/kg intake) prevented hypoxia-induced right ventricular hypertrophy (RVH), hypoxia-induced increases in right ventricular systolic pressure (RVSP), pulmonary vascular remodeling, and permeability. A reversal effect of butyrate (2200 mg/kg intake) was observed on elevated RVH. Butyrate treatment also increased the acetylation of histone H3, 25–34 kDa, and 34–50 kDa proteins in the total lung lysates of butyrate-treated animals. In addition, butyrate decreased hypoxia-induced accumulation of alveolar (mostly CD68+) and interstitial (CD68+ and CD163+) lung macrophages. Analysis of cytokine profiles in lung tissue lysates showed a hypoxia-induced upregulation of TIMP-1, CINC-1, and Fractalkine and downregulation of soluble ICAM (sICAM). The expression of Fractalkine and VEGFα, but not CINC-1, TIMP-1, and sICAM was downregulated by butyrate. In rat microvascular endothelial cells (RMVEC), butyrate (1 mM, 2 and 24 h) exhibited a protective effect against TNFα- and LPS-induced barrier disruption. Butyrate (1 mM, 24 h) also upregulated tight junctional proteins (occludin, cingulin, claudin-1) and increased the acetylation of histone H3 but not α-tubulin. These findings provide evidence of the protective effect of butyrate on hypoxic PH and suggest its potential use as a complementary treatment for PH and other cardiovascular diseases.     

Mechanical properties and translucency of a multi-layered zirconia with color gradient for dental applications

In this work, the properties of yttria-stabilized zirconia-based ceramics, Y-TZP containing Fe₂O₃ as coloring agent were evaluated. Nanoparticled powder of 3Y-TZP (ZrO₂ - 3 mol.% Y₂O₃) doped with different amounts of Fe₂O₃ (0.002–0.136 wt%) were compacted into monolithical or multilayered samples and sintered at 1475 °C - 2 h. The samples were characterized by X-ray diffraction analysis (XRD), relative density, scanning electron microscope (SEM). Hardness and fracture toughness in the color interface were investigated using the Vickers indentation method and the biaxial flexural strength was determined by the piston on 3 balls method (P–3B). Furthermore, optical parameters were measured using spectrophotometry in regard to sample thickness and Fe₂O₃ content. The results indicated a good adhesion between layers, proven by indentation cracks randomly growing between different regions, because the powders used produced very similar morphological characteristics. The different amounts of Fe₂O₃ studied in this work did not interfere in densification, phase composition, or microstructure of the sintered ceramics. The fracture toughness and flexural strength did not significantly change due to the addition of Fe₂O₃, presenting values close to 7 MPa m^1/2 and 1120–1150 MPa, respectively, in all studied compositions. On the other hand, increasing Fe₂O₃ contents lead to an increase in the hardness of the material (1280–1330 H V), and higher contrast ratios (CR) with a consequent loss of translucency. Color variation (ΔE) depended also on the thickness of the material.     

Correction to: Two New Co(II) Complexes of Picolinate: Synthesis,Crystal Structure,Spectral Characterization, α-Glucosidase İnhibition and TD/DFT Study

Journal of Inorganic and Organometallic Polymers and Materials -     

Seasonal patterns in hydrochemical mixing in three Great Lakes rivermouth ecosystems

Rivermouth ecosystems in the Laurentian Great Lakes represent complex hydrologic mixing zones where lake and river water combine to form biologically productive areas that are functionally similar to marine estuaries. As urban, industrial, shipping, and recreational centers, rivermouths are the focus of human interactions with the Great Lakes and, likewise, may represent critical habitat for larval fish and other biota. The hydrology and related geomorphology in these deltaic systems form the basis for ecosystem processes and wetland habitat structure but are poorly understood. To this end, we examined hydrogeomorphic structure and lake-tributary mixing in three rivermouths of intermediate size using water chemistry, stable isotopes, and current profiling over a five-month period. In rivermouths of this size, the maximum depth of the rivermouth ecosystem influenced water mixing, with temperature-related, density-dependent wedging and layering that isolated lake water below river water occurring in deeper systems. The inherent size of the rivermouth ecosystem, local geomorphology, and human modifications such as shoreline armoring and dredging influenced mixing by altering the propensity for density differences to occur. The improved scientific understanding and framework for characterizing hydrogeomorphic processes in Great Lakes rivermouths across a disturbance gradient is useful for conservation, management, restoration, and protection of critical habitats needed by native species.     

Water level fluctuation and sediment–water nutrient exchange in Great Lakes coastal wetlands

The influence of water level fluctuation on sediment–water nutrient exchange in coastal wetlands of Lakes Michigan and Huron was investigated using controlled, laboratory experiments. At each wetland, sediment cores were collected from 5 locations along a transect perpendicular to the shoreline, desiccated for 8 weeks, and then re-wetted with original site water for 24 h to simulate water level fluctuation. Soluble reactive phosphorus release declined exponentially along transects, with highest release rates from sediments collected at the ordinary high water mark (OHWM), and lowest rates from sediments underlying water > 0.25 m in depth. Nitrate exchange showed no obvious pattern in the Lake Michigan wetlands but nitrate was lost at all locations in the Lake Huron wetlands, suggesting denitrification. Ammonium was released at all sites, but with no obvious pattern along transects. Sulfate release was low at the OHWM locations and increased in a lakeward direction, plateauing by the 0.25 m water depth.     

Use of copper shavings to remove mercury from contaminated groundwater or wastewater by amalgamation

The efficacy of copper shavings (Cu(0)) for the removal of Hg2+ from aqueous solution by amalgamation is demonstrated. Two kinds of copper shavings were investigated: (a) chemically processed shavings (Fluka) and (b) recycled shavings from scrap metal. Batch sorption experiments yielded very high retardation coefficients of 28 850-82 830 for the concentration range studied (1-10 000 microg/L Hg2+ dissolved in distilled water or in a 0.01 M CaCl2 matrix solution). Sorption data were well-described bythe Freundlich isotherm equation. Kinetic batch sorption experiments showed that 96-98% of Hg2+ was removed within 2 h. Column experiments were performed with a mercury solution containing 1000 microg/L Hg in a 0.01 M CaCl2 matrix with a flow rate of 0.5 m/d. No mercury breakthrough (c/c(0) = 0.5) could be detected after more than 2300 percolated pore volumes, and the high retardation coefficients determined in the batch studies could be confirmed. Copper was released from the shavings due to the amalgamation process and to copper corrosion by oxygen, resulting in concentrations of mobilized copper of 0.2-0.6 mg/L. Due to their high efficiency in removing Hg2+ from aqueous solution, the use of copper shavings for the removal of mercury from contaminated water is suggested, employing a sequential system of mercury amalgamation followed by the removal of mobilized copper by an ion exchanger such as zeolites. Possible applications could be in environmental technologies such as wastewater treatment or permeable reactive barriers for in situ groundwater remediation.     

Hydroxymethylated resorcinol (HMR) priming agent for improved bondability of silicone modified wood glued with a polyvinyl acetate adhesive

A hydroxymethylated resorcinol (HMR) was used as a coupling agent to improve glueability of silicone (aminofunctional polydimethylsiloxane) modified pine sapwood (Pinus sylvestris) with polyvinyl acetate (PVAc). Priming with HMR did not significantly increase tensile shear strength of unmodified and silicone treated wood under dry conditions. Under wet conditions, tensile shear strength of the control specimens was increased by 37% and of the silicone modified specimens by 13%. Despite of higher shear strength under wet conditions, the primed silicone treated specimens displayed lower degree of wood failure than the unprimed treated specimens.