Enhanced Performance of I2‐Free Solid‐State Dye‐Sensitized Solar Cells with Conductive Polymer up to 6.8%

An iodine‐free solid‐state dye‐sensitized solar cell (ssDSSC) is reported here, with 6.8% energy conversion efficiency—one of the highest yet reported for N719 dye—as a result of enhanced light harvesting from the increased transmittance of an organized mesoporous TiO₂ interfacial layer and the good hole conductivity of the solid‐state‐polymerized material. The organized mesoporous TiO₂ (OM‐TiO₂) interfacial layer is prepared on large‐area substrates by a sol‐gel process, and is confirmed by scanning electron microscopy (SEM) and grazing incidence small‐angle X‐ray scattering (GISAXS). A 550‐nm‐thick OM‐TiO₂ film coated on fluorine‐doped tin oxide (FTO) glass is highly transparent, resulting in transmittance increases of 8 and 4% compared to those of the bare FTO and conventional compact TiO₂ film on FTO, respectively. The high cell performance is achieved through careful control of the electrode/hole transport material (HTM) and nanocrystalline TiO₂/conductive glass interfaces, which affect the interfacial resistance of the cell. Furthermore, the transparent OM‐TiO₂ film, with its high porosity and good connectivity, exhibits improved cell performance due to increased transmittance in the visible light region, decreased interfacial resistance ( Ω ), and enhanced electron lifetime ( τ ). The cell performance also depends on the conductivity of HTMs, which indicates that both highly conductive HTM and the transparent OM‐TiO₂ film interface are crucial for obtaining high‐energy conversion efficiencies in I₂‐free ssDSSCs.     

Synthesis and electroluminescent properties of blue emitting materials based on arylamine-substituted diphenylvinylbiphenyl derivatives for organic light-emitting diodes

This paper reports the synthesis and electroluminescent properties of a series of blue emitting materials with arylamine and diphenylvinylbiphenyl groups for applications to efficient blue organic light-emitting diodes (OLEDs). All devices exhibited blue electroluminescence with electroluminescent properties that were quite sensitive to the structural features of the dopants in the emitting layers. In particular, the device using dopant 4 exhibited sky-blue emission with a maximum luminance, luminance efficiency, power efficiency, external quantum efficiency and CIE coordinates of 39,000 cd/m², 12.3 cd/A, 7.45 lm/W, 7.71% at 20 mA/cm² and (x = 0.17, y = 0.31) at 8 V, respectively. In addition, a blue OLED using dopant 2 with CIE coordinates (x = 0.16, y = 0.18) at 8 V exhibited a luminous efficiency, power efficiency and external quantum efficiency of 4.39 cd/A, 2.46 lm/W and 2.97% at 20 mA/cm², respectively.     

Direct writing of semiconducting polythiophene and fullerene derivatives composite from bulk heterojunction solar cell by inkjet printing

The direct writing approach of poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) composite from bulk-heterojunction (BHJ) solar cell was efficiently addressed by inkjet printing technology using conventional chlorobenzene ink solution. The structure of inkjet-printed P3TH:PCBM BHJ film was fabricated by the repetitive direct writing of new line overlapped partially on former line. The best structure of P3HT:PCBM film for BHJ solar cell was observed from inkjet printing condition of around 50% of droplet overlaps with 2 wt.% BHJ ink at 25 °C of substrate temperature. The maximum power conversion efficiency reached 2.83% with an open circuit voltage of 0.62 V, a short circuit current density of 8.60 mA/cm², and a fill factor of 0.53 under air mass 1.5 G irradiation (100 mW/cm²).     

Efficient white organic light-emitting diodes with mixed electron transporting layers

The authors demonstrated phosphorescent white organic light-emitting diodes (PHWOLED) with mixed electron transporting layers (M-ETL) using 4,7-diphenyl-1,10-phenanthroline (BPhen)/4,4′-bis (carbazol-9-yl)biphenyl (CBP). The M-ETL PHWOLED exhibited the optimum balance of holes and electrons, owing to the low electron mobility of the CBP M-ETL. The optimized PHWOLED showed a peak current efficiency of 16.85 cd/A and a peak external quantum efficiency of 7.32%.     

Experimental investigations on impaction pin nozzles for inlet fogging system

Increasing power demands have necessitated the development of energy efficient systems in the industrial sector. At present, about 10% of the overall electric power used by large industrial plants is consumed by high-capacity compressors supplying compressed air. Likewise, in a gas turbine power plant, nearly half the generated power is used for driving the compressor. The work of compression is proportional to inlet air temperature, and cooling the inlet air can save considerable amount of power in large turbo machines during hot summer months. Inlet fogging is a popular means of inlet air cooling, and fog nozzles are the most critical components in an inlet fogging installation. Majority of these installations employ impaction pin nozzles. In the present work, experiments are conducted over a wide range of operating parameters in variable length wind tunnels of different cross sections in order to investigate the performance of impaction pin nozzle in inlet fogging. Flow visualization and measurements are carried out to analyze the fog behavior and identify suitable nozzle locations in typical air ducts. The results show that impaction pin nozzles are suitable for inlet fogging applications.     

Highly Fluorescent and Color‐Tunable Exciplex Emission from Poly(N‐vinylcarbazole) Film Containing Nanostructured Supramolecular Acceptors

Highly fluorescent excited‐state charge‐transfer complexes (exciplexes) formed at the interfacial region between a polymeric donor matrix, here, poly(N‐vinylcarbazole), and embedded nanostructured acceptors are characterized for their photophysical properties. Exciplex‐to‐exciton emission switching is observed after solvent vapor annealing (SVA) due to the size evolution of the nanostructures beyond the exciton diffusion length. Color‐tunable exiplex emission (sky blue, green, and orange) is demonstrated for three different nanostructured acceptors with the same HOMO–LUMO gap (i.e., the same blue excitonic emission) but with different electron affinity. White‐emitting poly(N‐vinylcarbazole) film is also fabricated, simply by incorporating mixed supramolecular acceptors, which provide independent exciplex emissions. This study presents important insights into the excited‐state intermolecular interaction at the well‐defined nanoscale interface and suggests an efficient way to obtain multicolored exciplex emissions.     

On Joint Order Statistics in Correlated Nakagami Fading Channels

In this letter, the joint probability density function (pdf) of the order statistics for a set of correlated Nakagami-m fading channels is derived. This result is useful in analyzing the performance of a variety of diversity schemes which involve branch selection. The derivation also yields a computationally efficient method for obtaining the marginal pdf of the p-th order statistic for a set of correlated Nakagami-m fading channels.     

Limitations in fibre Raman amplifiers imposed by Rayleighscattering of signals

A simple method of Rayleigh scattering noise calculation in fibre Raman amplifiers is proposed. Using the method, it is disclosed that the optimal Raman pump power is lower when the Rayleigh scattering of both signal and amplified spontaneous emission (ASE) are considered than when the Rayleigh scattering of ASE only is considered     

Multilayer feedforward neural networks with single powers-of-twoweights

A new algorithm for designing multilayer feedforward neural networks with single powers-of-two weights is presented. By applying this algorithm, the digital hardware implementation of such networks becomes easier as a result of the elimination of multipliers. This proposed algorithm consists of two stages. First, the network is trained by using the standard backpropagation algorithm. Weights are then quantized to single powers-of-two values, and weights and slopes of activation functions are adjusted adaptively to reduce the sum of squared output errors to a specified level. Simulation results indicate that the multilayer feedforward neural networks with single powers-of-two weights obtained using the proposed algorithm have generalization performance similar to that of the original networks with continuous weights     

Effects of midazolam on the differentiation of murine myeloid leukemia cells

The effects of midazolam (MID) on the in vitro growth and differentiation of two murine myeloid leukemia WEHI 3B (JCS) and M1 cells were studied. MID inhibits the proliferation of both M1 and JCS cells in a dose-dependent manner. At the concentration of 10 micrograms/ml, MID was found to induce both monocytic and granulocytic differentiation of the JCS but not M1 cells. Induction of morphological differentiation of the JCS cells was also associated with the enhanced expression of the differentiation antigens Mac-1, F4/80, and Gr-1 for the cells. Results from mRNA phenotyping experiments also indicated that the expression of tumor necrosis factor (TNF-alpha) and neutrophil-specific J11d differentiation marker was significantly upregulated in MID-treated JCS cells. In addition, the phagocytic activity of MID-treated JCS cells was increased towards opsonized yeast cells. Results from this investigation suggested that MID may be used as an inducer for further study on the mechanisms of differentiation in these myeloid leukemia cells.