Three-year atmospheric monitoring of organochlorine pesticides and polychlorinated biphenyls in polar regions and the South Pacific

XAD-2 resin based passive air samplers (PAS) were deployed for three one-year periods at the Korean polar and South Pacific research stations at Ny-?lesund (2005-2009), King George Island (2005-2007), and Chuuk (2006-2009) to investigate long-range transport, local sources, and temporal trends of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs). The highest hexachlocyclohexane (HCH) concentration (35.2-78.9 pg·m(-3)) over the entire sampling period was detected at Ny-?lesund, in the Arctic. α-HCH was the dominant OCP (31.1-67.1 pg·m(-3)), contributing about 50% of the total OCP load. Additionally, a high and consistent α/γ-HCH ratio was observed at Ny-?lesund. HCHs might reach Arctic sites more easily than other OCPs from surrounding countries through long-range atmospheric transport (LRAT). Interestingly, high levels of the current-use OCP endosulfan-particularly endosulfan-I--were detected at almost all sampling sites, including in Antarctica, ranging 12.2-88.5, 17.7-130, and ND-59.7 pg·m(-3) at King George Island, Ny-?lesund, and Chuuk, respectively. Specific OCP and PCB patterns, such as low trans/cis-chlordane ratios and a prevalence of lighter PCB congeners, were observed in all three regions (excepting one site at Ny-?lesund and one site in the South Pacific affected by local sources) during all sampling periods. This indicates that these Polar and remote South Pacific sites are mainly influenced by LRAT. Over the entire sampling period, a decreasing trend of HCHs (α- and γ-HCH) and an increasing trend of endosulfan-I were observed at the Ny-?lesund sites.     

Prophylactic effect of Korean mistletoe (Viscum album coloratum) extract on tumor metastasis is mediated by enhancement of NK cell activity

We here demonstrated the prophylactic effect of an extract (KM-110) from Viscum album coloratum, a Korean mistletoe, on tumor metastasis produced by highly metastatic tumor cells, colon 26-M3.1 carcinoma, B16-BL6 melanoma and L5178Y-ML25 lymphoma cells, using experimental models in mice. Intravenous (i.v.) administration of KM-110 (100 microg/mouse) 2 days before tumor inoculation significantly inhibited lung metastasis of B16-BL6 and colon 26-M3.1 cells, and liver and spleen metastasis of L5178Y-ML25 cells. The prophylactic effect of KM-110 on tumor metastasis was evident with various administration routes, i.e. subcutaneous, oral, intranasal as well as i.v., and was dependent upon the dose of KM-110 administered. Furthermore, mice given KM-110 (100 microg) 2 days before tumor inoculation showed significantly prolonged survival rates compared with the untreated mice. In a time course analysis of NK activity, i.v. administration of KM-110 (100 microg) significantly augmented NK cytotoxicity to Yac-a tumor cells from 1 to 3 days after KM-110 treatment. Furthermore, depletion NK cells by injection of rabbit anti-asialo GM1 serum completely abolished the inhibitory effect of KM-110 on lung metastasis of colon 26-M3.1 cells. These results suggest that KM-110 possesses immunopotentiating activity which enhances the host defense system against tumors, and that its prophylactic effect on tumor metastasis is mediated by NK cell activation.     

Distribution of bacteria with the arylsulfate sulfotransferase activity

We herein report a simple method using intestinal clamps to prevent intraoperative contamination during an immediate mucocutaneous suture of the intestinal stoma. Using this technique, a protruded intestinal stoma can be constructed reliably without soiling. The technique can be used both for constructing an end as well as a loop intestinal stoma.     

Protective Effect of Microencapsulation Consisting of Multiple Emulsification and Heat Gelation Processes on Immunoglobulin in Yolk

ABSTRACT: Two different emulsification methods involving multiple emulsification and heat gelation were used for preparation of whey protein-based microcapsules containing immunoglobulin in yolk (IgY). The residual activity of IgY during the emulsion preparation and the effects of microencapsulation on IgY stability under harsh conditions were investigated. The residual activity of IgY in an emulsion prepared with a membrane emulsifier was higher than for an emulsion using a homogenizer. Microencapsulated IgY showed remarkable stability against both pepsin and acid. Both microencapsulated IgY and nonencapsulated IgY were relatively stable in bile and artificial intestinal juice. Microencapsulated IgY retained 74% of initial activity during heat treatment. There were no significant differences in the residual activities of microencapsulated IgY under storage temperatures of 4, 25, and 37°C.     

The First Inert and Photostable Encapsulated Lanthanide(III) Complexes Based on Dendritic 9,10‐Diphenylanthracene Ligands: Synthesis,Strong Near‐Infrared Emission Enhancement,and Photophysical Studies

A series of inert and photostable encapsulated lanthanide(III) complexes—based on dendritic anthracene ligands—is shown for the first time to exhibit strong near‐IR emission bands via efficient energy transfer from the excited states of the peripheral antenna to the Ln³⁺ ions (Er³⁺, Yb³⁺, and Nd³⁺). A significant decrease in the fluorescence of the anthracene ligand is accompanied by a strong increase in the near‐IR emission of the Ln³⁺ ions. The near‐IR emission intensities of Ln³⁺ ions in the encapsulated Ln³⁺–dendrimer complexes are dramatically enhanced on increasing the generation number (n) of dendrons, owing to site‐isolation and light‐harvesting effects. Furthermore, a first attempt is made to distinguish between the site‐isolation and light‐harvesting effects in the present complexes. Photophysical studies indicate the sensitization of Ln³⁺ luminescence by energy transfer through the excited singlet state of the anthracene ligands, and the energy‐transfer efficiency between the dendritic anthracene ligands and the Ln³⁺ ion is evaluated to be in the range of 90 to 97 %. Their energy‐transfer efficiency is in good agreement with the result that the biexponential decays contain a radiative decay of anthracene units (< ca. 10 %) and an energy‐transfer component (> ca. 90 %) from the excited state of anthracene ligands to the Ln³⁺ ions. Time‐resolved luminescence spectra show monoexponential decays with a lifetime of 2 μs for the Er³⁺ ion 11 μs for the Yb³⁺ ion and 0.7 μs for the Nd³⁺ ion in thin films, and calculated intrinsic quantum yields of the Ln³⁺ ions are in the range of ca. 0.025 to 0.55 %.     

Experimental demonstration of enhancing pump absorption rate in cladding-pumped ytterbium-doped fiber lasers using pump-coupling long-period fiber gratings

A long-period fiber grating (LPFG) was inscribed in a single-mode fiber and was spliced with a ytterbium (Yb)-doped double-clad fiber in order to couple pump radiation of the inner cladding into the core in a cladding-pumped fiber laser. The use of an LPFG permits a partial core-pumping scheme in a cladding-pumping fiber laser because a portion of the pump radiation can be coupled to the core by LPFG. The enhancement of the pump absorption of a Yb-doped cladding-pumped fiber laser as the result of pump coupling by LPFG was 35%, and the maximal output power increased by up to 55% when a 20-W pump source is used.     

Lubrication for Micro Forming of Ultra Thin Metal Foil

The objective of the present investigation is to establish lubrication technique in micro forming operation. Conventional lubricant, in general, cannot be applied directly to micro forming process, since the lubricant thickness is similar to the dimensions of feature size in micro forming operations. In present investigation, the Octadecyltrichlorosilane (OTS) self-assembled monolayer (SAM) was chosen as a potential lubricant because it sticks to Si wafer die and can be applied to surface with uniform thickness of several nanometer thick. Friction coefficient and adhesion force were measured for OTS SAM coated wafer. It is shown that OTS SAM coated Si wafer offers substantially lower friction and lower adhesion than bare Si wafer. Micro channel wafer die was coated with OTS SAM and channel forming operation with 1μm thick copper foil was carried out. Experimental results show that OTS SAM coated wafer die improves forming characteristic of ultra thin copper foil substantially. These results show that SAM coating can be used as a lubricant in micro forming successfully.     

Parametric trends analysis of the critical heat flux based on artificial neural networks

Parametric trends of the critical heat flux (CHF) are analyzed by applying artificial neural networks (ANNs) to a CHF data base for upward flow of water in uniformly heated vertical round tubes. The analyses are performed from three viewpoints, i.e., for fixed inlet conditions, for fixed exit conditions, and based on local conditions hypothesis. Katto's and Groeneveld et al. dimensionless parameters are used to train the ANNs with the experimental CHF data. The trained ANNs predict the CHF better than any other conventional correlations, showing RMS errors of 8.9%, 13.1% and 19.3% for fixed inlet conditions, for fixed exit conditions, and for local conditions hypothesis, respectively. The parametric trends of the CHF obtained from those trained ANNs show a general agreement with previous understanding. In addition, this study provides more comprehensive information and indicates interesting points for the effects of the tube diameter, the heated length, and the mass flux. It is expected that better understanding of the parametric trends is feasible with an extended data base.     

Treatment of taste and odor material by oxidation and adsorption.

Massive blooms of blue-green algae in reservoirs produce the musty-earthy taste and odor, which are caused by compounds such as 2-MIB and geosmin. 2-MIB and geosmin are rarely removed by conventional water treatment. Their presence in the drinking water, even at low levels (ng/L), can be detected and it creates consumer complaints. So those concentrations have to be controlled as low as possible in the drinking water. The removals by oxidation (O3, Cl2, ClO2) and adsorption (PAC, filter/adsorber) were studied at laboratory and pilot plant (50 m3/d) to select suitable 2-MIB and geosmin treatment processes. The following conclusions were derived from the study. Both of the threshold odor levels for 2-MIB and geosmin appeared to be 30 ng/L as a consequence of a lab test. For any given PAC dosage in a jar-test, removal efficiencies of 2-MIB and geosmin were increased in proportion to PAC dosage and were independent of their initial concentration in raw water for the tested PAC dosages. In comparison of geosmin with 2-MIB, the adsorption efficiency of geosmin by PAC was superior to that of 2-MIB. The required PAC dosages to control below the threshold odor level were 30 mg/L for geosmin and 50 mg/L for 2-MIB at 100 ng/L of initial concentration. Removal efficiencies of odor materials by Cl2, ClO2, and O3 were very weak under the limited dosage (1.5 mg/L), however increased ozone dosage (3.8 mg O3/L) showed high removal efficiency (84.8% for 2-MIB) at contact time 6.4 minutes. According to the initial concentrations of 2-MIB and geosmin, their removal efficiencies by filter/adsorber differed from 25.7% to 88.4%. For all those, however, remaining concentrations of target materials in finished waters were maintained below 30 ng/L. The longer run-time given for the filter/adsorber, the higher the effluent concentration generated. So it is necessary that the run-time of the filter/adsorber be decreased, when 2-MIB or geosmin occurs in raw water.