Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Permanent jet formation in beds of particulate solids

The simple criterion proposed by Chandnani and Epstein (1984, 1986) for stable spouting, d_or/d_p ≤ 25.4, is shown to give a good separation between gas-solid systems which form permanent jets and those that bubble, for a wide range of experimental data reported in the literature. The criterion is suggested as a necessary but not sufficient condition for permanent jet formation in fluidized, spout-fluid and spouted beds.     

Estimation of rheological parameters using velocity measurements

In the present investigation, we develop a method for estimating rheological parameters of viscoelastic fluids using velocity measurement in a square straight channel. It is believed that a somewhat complicated patterns of secondary flows due to the non-zero second normal stress difference are more useful than the simple viscometric flows traditionally adopted in the determination of rheological parameters. The inverse problem of determining the rheological parameters from a set of velocity measurements is solved using a conjugate gradient method. When applied to a general constitutive equation encompassing the UCM model, the Oldroyd-B model and the PTT model, the present method is found to yield a reasonably accurate estimation of five rheological parameters simultaneously even with noisy velocity measurements.     

Preparation and properties of polyelectrolyte complex sponges composed of hyaluronic acid and chitosan and their biological behaviors

Polyelectrolyte complexes (PECs) composed of chitosan and hyaluronic acid (HA) were prepared in various pH regions and at different weight ratios. At low pHs, there was a strong ionic interaction between NH groups in chitosan and both COO^? and COOH groups in HA due to the deprotonation of HA, whereas weak linkages were formed at high pHs because only the carboxyl groups of HA could interact with NH groups in chitosan. The formation of PECs resulted in a decrease in the crystallinity and thermal stability caused by the interactions between polyions. With variations in the degree of ionization of polyions at various pH conditions, novel PEC sponges were prepared by the freeze drying of PEC solutions. Furthermore, for the evaluation of the wound‐healing effect of PEC sponges with or without an antimicrobial agent (silver sulfadiazine), they were applied to a full‐skin defect of a Wistar rat in vivo. The histology and computerized morphometric analysis of the epidermal healing confirmed the proliferation of fibroblasts in the wound bed and a distinct reduction in infectious agents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 925–932, 2003     

Use of cascade reduction potential for selective precipitation of Au,Cu, and Pb in hydrochloric acid solution

Optimization of reduction potential for electroseparation was studied for the recovery of gold, copper, and lead from acidic solution. A linear sweep voltammetric method enabled us to determine characteristic reduction potentials for each metal and the kinetics of the metal deposition indicated by current-voltage curves. In order to precipitate the metal species sequentially, reduction potentials were examined for the individual and mixed solutions of Au(III), Cu(II), and Pb(II). The three metals were reasonably well isolated from the mixed solutions such as Cu(II)/ Pb(II) and Au(III)/Cu(II)/Pb(II) in the order of the corresponding reduction potentials, in particular, the mass transfer controlled reduction potentials, obtained from linear sweep voltammetry (LSV) measurement.     

Flood Inundation Modelling for Mid‐Lower Brisbane Estuary

This study utilizes a two‐dimensional hydrodynamic model to calibrate and validate an inundation model for the Brisbane River estuary in Queensland, Australia. The bathymetry data used in the hydraulic model are derived from one arc second (1 s) shuttle radar topography mission digital elevation model, and the two‐dimensional hydraulic model is parameterized using the generated bathymetry with four open boundaries with water level observations and roughness coefficients. The calibration performance is evaluated by comparing the simulated results with the digitized records during the January 2013 flood event (a low magnitude event) at three gauging stations. The calibrated model is validated with water level data and available discharge data during the January 2011 flood (a large magnitude event) at four gauging stations located along the Brisbane River. Different performance indices are applied to demonstrate that the developed model performs well during calibration and validation. A sensitivity analysis is presented to assess the influence of riverbed elevation changes on the model because the main uncertainty of the model is the bathymetry data. The proposed model with the shuttle radar topography mission digital elevation model‐derived riverbed elevation for the Brisbane estuary is able to predict the flood inundation extent at an accuracy of 66.9% which is higher than or comparable with the accuracies of the existing studies. However, it is expected that the accuracy will increase if some improved bathymetry data become available in the future. Copyright © 2016 John Wiley & Sons, Ltd.     

Rubber‐toughened polypropylene nanocomposite: Effect of polyethylene octene copolymer on mechanical properties and phase morphology

Rubber‐toughened polypropylene (PP)/org‐Montmorillonite (org‐MMT) nanocomposite with polyethylene octene (POE) copolymer were compounded in a twin‐screw extruder at 230°C and injection‐molded. The POE used had 25 wt % 1‐octene content and the weight fraction of POE in the blend was varied in the range of 0–20 wt %. X‐ray diffraction analysis (XRD) revealed that an intercalation org‐MMT silicate layer structure was formed in rubber‐toughened polypropylene nanocomposites (RTPPNC). Izod impact measurements indicated that the addition of POE led to a significant improvement in the impact strength of the RTPPNC, from 6.2 kJ/m² in untoughened PP nanocomposites to 17.8 kJ/m² in RTPPNC containing 20 wt % POE. This shows that the POE elastomer was very effective in converting brittle PP nanocomposites into tough nanocomposites. However, the Young's modulus, tensile strength, flexural modulus, and flexural strength of the blends decreased with respect to the PP nanocomposites, as the weight fraction of POE was increased to 20 wt %. Scanning electron microscopy (SEM) was used for the investigation of the phase morphology and rubber particles size. SEM study revealed a two‐phase morphology where POE, as droplets was dispersed finely and uniformly in the PP matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3441–3450, 2006     

Physical characteristics of sweet potato pulp/polycaprolactone blends

Sweet potato pulp (SSP) obtained as a by‐product from starch extraction was blended with polycaprolactone (PCL) to prepare a biodegradable plastic material. In the blends, PCL was used as a reinforcing agent. The SPP/PCL blends were prepared by compression‐molding under high temperature and pressure, at different SPP/PCL ratios, and the mechanical properties of the molded specimens were tested. Matrix structure and thermal properties were measured by using a Fourier transform infrared (FTIR) spectrophotometer, scanning electron microscope (SEM), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). Mechanical properties (tensile and flexural properties) were also measured to find the most suitable ratio in a SSP/PCL blend. During compression molding of the SPP/PCL blends under high pressure and temperature, chemical reaction occurred between SPP and PCL, and thus, thermal stability and mechanical strength of the blends increased and water uptake decreased. Also, by increasing the PCL content in the blend, the matrix in the blend became more homogeneous, and consequently, mechanical strength of the molded specimen increased. At 7/3 or 6/4 weight ratio of SSP/PCL, water uptake of the molded specimen became substantially less than that at 8/2. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 861–866, 2004     

Performance of fluorine-added CoMoS/Al2O3 prepared by sonochemical and chemical vapor deposition methods in the hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene

The performance of a new type of CoMoS/Al₂O₃ catalyst, with added fluorine and prepared by sonochemical and chemical vapor deposition (CVD) methods, was investigated in the hydrodesulfurization (HDS) of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT). The catalyst, which was designed to contain optimum amounts of fluorine and cobalt, exhibited a higher activity, ca. 4.6 times higher activity particularly in the HDS of 4,6-DMDBT, than a fluorine-free catalyst prepared by a conventional impregnation method. The enhanced activity of the new catalyst can be attributed to the cumulative effects of individual factors involved in the catalyst preparation. That is, the use of a sonochemical synthesis led to a high dispersion of small MoS₂ crystallites on the alumina, and the addition of the Co species to the catalyst by CVD caused a close interaction between the Co species and the MoS₂ crystallites to produce numerous CoMoS species, which are the catalytically active species for HDS. The addition of fluorine increased the amounts of acidic sites in the catalyst, which promoted hydrogenation (HYD) route to a greater extent than the direct desulfurization (DDS) route in DBT HDS and both HYD and DDS routes to similar extents in the case of 4,6-DMDBT HDS. Accordingly, the addition of fluorine led to a greater increase in catalytic activity for 4,6-DMDBT HDS than for DBT HDS.     

Tactile display with tangential and normal skin displacement for robot-assisted surgery

This paper proposes a tactile display providing both shear and normal feedback to the fingertip for generating three-axis tactile feedback during teleoperation of a surgical robot. The display is composed of five balloons actuated by controlling the pneumatic pressure. The implemented display is 18?mm?×?18?mm?×?15?mm. This size is suitable for mounting the display onto the master controls of a surgical robot. The maximum normal and shear displacements are 2 and 1.3?mm, respectively. The proposed tactile display may provide perceivable stimuli to a human finger pad in all five directions: normal, distal, proximal, radial, and ulnar. This paper also reports on the results of psychophysical measurement of the minimum perceivable movement of the developed tactile display for each of the five directions.