Oxidative and color stability of cooked ground pork containing lotus leaf (Nelumbo nucifera) and barley leaf (Hordeum vulgare) powder during refrigerated storage

This study aimed to evaluate the oxidative and color stability of cooked ground pork containing lotus leaf powder at 0.1 (LP1) and 0.5% (LP2) as well as barley leaf powder at 0.1 (BP1) and 0.5% (BP2) during refrigerated storage for 10 days. The oxidative stability of these powders was compared with butylhydroxytoluene (BHT). LP1 had higher a* and lower b* values than the control (-) over 4 days (p<0.05). The pH values of the ground pork samples made with addition of LP and BHT decreased until day 4 and then increased. Thiobarbituric acid-reactive substance (TBARS) values were lowest in LP2 on day 10 (p<0.05). The ground pork samples containing LP and BP had lower peroxide values (POVs) and conjugated dienes (CD) compared to the control (-).These results indicate that LP or BP can be incorporated into ground pork to effectively retard oxidation after cooking.     

Acicular ferrite microstructure in titanium bearing low carbon steels

Abstract

Different microstructures having acicular ferrite as the major phase but with various types and amounts of microphases were obtained by applying different cooling processes to C–Mn steels containing fine non-metallic inclusions. Optical and electron microscopy were carried out to identify the various microphases in the acicular ferrite microstructure, and their mechanical properties were measured and compared to study the effect of the microphases on the microstructure–properties relationship in C–Mn wrought steels. The existence and increase of the fraction of small isolated martensite between the acicular ferrite laths were found to play an important role in determining the tensile strength and low temperature impact toughness of the steels. However, the elongation and room temperature impact toughness were rather insensitive to the microphases. This may be attributed to the uniform distribution and isolation of relatively small martensite due to the fine interlocking character of the acicular ferrite microstructure.     

Subjective Listening Experiments on a Front and Rear Array‐Based WFS System

Wave field synthesis (WFS) has been gathering more and more attention recently due to its ability to perfectly reproduce an original sound field. However, to realize theoretically perfect WFS, a four‐sided loudspeaker array that encloses the listener is required. However, it is difficult to build such a system except in large listening spaces, such as a theater or concert hall. In other words, if the listening space is a home, installing a side loudspeaker array is impractical. If the two side walls located to the left and right of the listener can be omitted, a setup using only front and rear loudspeaker arrays may be a solution. In this letter, we present a subjective listening experiment of sound localization/distance based on a WFS using a front and rear loudspeaker array system which is conducted on two listening points and shows average localization errors of 6.1° and 9.18°, while the average distance errors are –27% (0.5 m) and –29% (0.6 m), respectively.     

Multiple cerebellar infarction due to vertebral artery obstruction and bulbar symptoms associated with vertical subluxation and atlanto-occipital subluxation in ankylosing spondylitis

Ankylosing spondylitis (AS) results in disease-specific inflammation at the site of ligamentous insertion into the bone. Atlantoaxial joint subluxation and vertical subluxation of the axis may occur as a consequence of instability resulting from the inflammatory process. Spontaneous anterior atlantoaxial subluxation is a well recognized complication in about 2% of patients with AS, and presents with or without signs of spinal cord compression. Vertical subluxation may follow anterior or posterior subluxation. It was noted in 3-8% of patients with rheumatoid arthritis, but is an exceedingly rare complication of AS. Moreover, it has never been reported that multiple cerebellar infarction and bulbar symptoms developed spontaneously due to atlanto-occipital subluxation and vertical subluxation in a patient with a long [corrected] history of AS. We describe a man with AS who developed multiple cerebellar infarction due to vertebral artery obstruction and bulbar symptoms associated with atlanto-occipital subluxation and vertical subluxation.     

Effective pedestrian detection using deformable part model based on human model

Recently, pedestrian detection systems have become an important technology in the development of the advanced driver assistance system (ADAS) for the autonomous car. The histogram of oriented gradients (HOG) is currently the most basic algorithm for detecting pedestrians, but it treats the entire body of the pedestrian as one single feature. In other words, if the entire body of the pedestrian is not visible, the detection rate under HOG decreases markedly. To solve this problem, we propose a detection system using a deformable part model (DPM) that divides the pedestrian data into two parts using a latent support vector machine (SVM)-based machine-learning technique. Experimental results show that our approach achieves better performance in a detection system than the existing method. In practice, there are many occlusions in the environment in front of the vehicle. For example, the surrounding transport facilities, such as a car or another obstacle, can occlude a pedestrian. These occlusions can increase the false detection rate and cause difficulties during the detection process. Our proposed method uses a different approach and can easily be applied in real-world scenarios, regardless of occlusions.

     

A gain-clamped SOA with distributed Bragg reflectors fabricated under both ends of active waveguide with different lengths

We demonstrate a gain-clamped semiconductor optical amplifier (GC-SOA) which has gratings under both end regions of an active waveguide. Two gratings of the new GC-SOA are fabricated in different lengths. Their lasing modes and gain characteristics are measured and analyzed with different combinations of grating lengths. It shows different gain and noise characteristics according to the measurement direction in asymmetric grating combinations.     

Ionic liquid mediated synthesis of silica/polystyrene core–shell composite nanospheres by radical dispersion polymerization

This report describes the novel preparation of silica/polystyrene (SiO₂/PS) core–shell composite nanospheres by in situ radical dispersion polymerization in an ionic liquid (IL). Silica nanoparticles were first surface modified by the silane coupling agent methacryloxypropyltrimethoxysilane (MPTMS), which is capable of copolymerizing with styrene and provided a reactive CC bond. Transmission electron microscopy (TEM) revealed core–shell morphology with smooth surfaces. X-ray photoelectron spectroscopy (XPS) analysis demonstrated that almost all of the SiO₂ nanoparticles were encapsulated by the polymer. The composite particles were also analyzed by FT-IR spectroscopy and thermogravimetric analysis (TGA). In principle, this simple and environmentally-friendly synthetic procedure can be employed to prepare other inorganic oxide-containing polymer composites.     

Thermal conductivity and mechanical properties of various cross-section types carbon fiber-reinforced composites

In this work, to study the characteristics of carbon fiber-reinforced composites with different fiber cross-section types, such as round, C, and hollow-shape, the thermal conductivity and mechanical properties were investigated and compared. The thermal conductivity was measured by means of steady-state method to the parallel and perpendicular direction of reinforcing fibers. The mechanical properties were evaluated by a variety of test methods i.e., flexural, interlaminar shear strength, and impact strength. As a result, it was found that the thermal conductivity was greatly depended on the cross-section type of the reinforcing fibers, as well as, the reinforcing orientation. Especially, the anisotropy factor (k _///k ) and the thermal diffusivity factor (_///) of C and hollow-type carbon fiber-reinforced composites showed about two times higher values than those of round-type one. Also, the mechanical results showed that C and hollow-type carbon fibers-reinforced composites had higher values than those of round-type one in all mechanical tested. These results were probably due to the basic properties of non-circular (C and hollow-type) carbon fiber which can improve interfacial binding forces and widen interfacial contact area between reinforcement and matrix, resulting in effectively transferring the applied stress.     

Sorption of C. I. Disperse Red 60 in polystyrene and PMMA films and polyester and Nylon 6 textiles in the presence of supercritical carbon dioxide

C. I. Disperse Red 60 (DR60) was absorbed into polymer films and textile fibers in the presence of supercritical carbon dioxide at pressures between 5 and 33MPa and at temperatures between 308.2 and 423.2 K. Polystyrene (PS) and poly(methyl methacrylate) (PMMA) films and polyester (polyethylene terephthalate: PET) and Nylon 6 textiles were used as absorbents. The amount of equilibrium sorption of dye increased both with pressure and temperature. The sorption behavior was successfully analyzed with the quasi dual-mode sorption model.     

Piezoresistive effects of copper-filled polydimethylsiloxane composites near critical pressure

Piezoresistive properties of polydimethylsiloxane (PDMS) filled with copper particles in volume fraction above the electrical percolation threshold (25.3–50.7 vol%) were investigated. Piezoresistive behavior of the PDMS-copper composites under compressive pressure showed not only a change in resistance by approximately six orders of magnitude (∼1.5 MPa), but also a change in the critical pressure due to variations in the hardness of the composites. Resistivity relaxation was observed near the critical pressure and was explained through a stress relaxation and percolation mechanism. The mean tunneling distance was calculated by using a theoretical equation for percolation under compression. When the gauge factors of the composites were plotted versus strain, a universal curve was obtained regardless of the copper contents. Finally, the PDMS-copper composite demonstrated good repeatability, showing only small differences in the relative resistance after five successive tests.