新型SiMnCr系高强度粗钢筋材料的研制

针对高强度钢筋的性能要求和钢筋生产的工艺特点 ,设计了一种新型的低碳SiMnCr系高强度钢。测定了该钢种的CCT曲线及其力学性能。在锻造或轧态下 ,可获得以低碳马氏体为主含少量贝氏体、残留奥氏体的复相组织 ,经低温回火 ,可获得高的强度 (σb>12 30MPa)和良好的塑性 (δ5≥ 8% )。     

考虑抗力退化的公路钢筋混凝土梁抗弯强度可靠性分析

本文采用了一个时变荷载模型和一个考虑了钢筋锈蚀，钢筋屈服拉力，混凝土抗压强度和粘结力等多个影响因素的多参数抗力劣化模型，对公路钢筋混凝土梁抗弯强度可靠性在服役期内的变化趋势进行了研究，并针对一实例对各影响参数对可靠性分析的敏感性进行了分析。     

商务智能在ERP系统中的应用

ERP系统属于典型的联机事务处理系统,不可避免的存在许多不足,无法提供企业决策所需的决策信息。商务智能是一种正在快速发展的技术,它在ERP中的应用有效的解决ERP存在的问题。     

薄板坯表面变形实验分析

对连铸薄板坯的坯壳表面变形的物理模拟实验方法进行了分析,提出一种"铜裹铅双金属"新实验方案,并对坯壳表面弯曲变形进行了分析.     

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.     

奥氏体化温度对含稀土半钢力学性能的影响

研究了奥氏体化温度对含稀土半钢力学性能的影响 ,结果表明 ,半钢的冲击韧度 (αK)、抗弯强度 (σbb)和相对韧性 (σbb× f )随奥氏体化温度的变化较明显 ,而硬度 (HRC)受奥氏体化温度影响较小 ,当奥氏体化温度为 960℃时 ,其综合力学性能最佳     

应用10mm薄板铸锭制备的NdFeB烧结磁体

NdFeB薄板铸锭具有晶粒细，富钕相分布均匀及在稀土含量较低时可以防止α－Fe相出现的特点，是一种适合制备高性能烧磁体的合金铸锭，本文介绍了一种用10mm薄板铸锭和球磨制粉方法制备烧结磁体的工艺，在设备要求较低的情况下制备得到了Br=1.37T,(BH)max=320kJ/m^3(40MGOe)的烧结磁体，同时比较了使用常规铸锭和常规工艺的结果，强调了氢爆法在该工艺中的重要作用，最后对该工艺的改进方向和10mm铸锭的应用前景进行了阐述。     

浅谈赣抚大堤樟防1标射水造墙的接缝技术和处理措施

介绍射水造墙的接缝原理，并把自己在施工过程中为确保接缝质量达到设计要求而总结出一些经验和处理措施提出为一起探讨。     

全密封变压器用波纹油箱的波纹高计算

介绍了全密封变压器所用的液纹油相的波纹筋高的计算方法，并用试验进行了验证。     

基于ARX模型的压电智能结构振动预测控制

采用预测控制法对压电智能结构的振动主动控制进行了实验研究，通过实验方法建立了系统的ARX模型，并在此基础上设计了预测控制器对结构进行振动主动控制。实验结果验证了该方法在压电智能结构振动主动控制中的可行性和有效性。