铁在盐酸中的缓蚀剂的两种作用类型的研究

通过腐蚀电位、极化曲线与交流阻抗测量研究了3种伯胺和丙炔醇对铁在盐酸中的缓蚀作用类型。结果表明,3种伯胺的缓蚀作用是几何覆盖效应,而丙炔醇的缓蚀作用则来自负催化效应。还证明,在强阳极极化的Tafel 直线区间,十二烷胺吸附在电极表面的覆盖率θ不随电位改变,十四烷胺的θ随电位的升高而增大。丙炔醇使铁阳极溶解反应活化能位垒增高的量.fa(θ)随电位升高而减小,其数值为df_a(θ)/dE=-73J·mol_-1.mV-1。     

EFFECT OF TRACE Cr ON PRECIPITATION AND MICROSTRUCTURAL PARAMETERS OF A COMMERCIAL PURITY Al-5.0Zn-1.8Mg ALLOY

本文利用硬度、显微镜和透射电镜系统地研究了微量Cr对工业纯Al-5.0Zn-1.8Mg合金的沉淀过程、临界形核温度T_c~′和组织参数的影响。结果表明,Cr是促进不均匀沉淀和提高T_c~′温度的元素。低温时效(T_a≤160℃)能抑制晶界沉淀桕(GBP)、无沉淀带(PFZ)和基体沉淀相(MPt)的长大;但高温时效(T_a≥180℃)它又能促进这些参数的强烈长大。这些变化特点,可用Cr与过剩空位交互作用的双重性机理来说明。     

持续发展是唯一出路

讨论了人类、环境与发展的关系，指出不适当的发展模式已使三者之间形成恶性循环，必须及时地改变发展模式。列举了中国面临的严重环境问题，指出只有走可持续发展的道路才是唯一出路。并提出为实施可持续发展应注意的６个主要问题。     

半刚性钢-混凝土组合节点受弯承载力的计算

在半刚性钢 -混凝土组合框架中 ,混凝土板中的纵向钢筋增加了节点的强度和刚度 ,但是 ,传统的设计方法往往忽略纵向钢筋的作用而采用简化的计算模型。因此 ,出于经济效益考虑 ,应该根据半刚性组合节点的实际受力性能建立更加准确的计算方法。这里详细介绍了考虑混凝土板纵向钢筋作用的半刚性组合节点受弯承载力的计算方法 ,计算结果表明 ,建议的公式与试验结果吻合良好 ,可供规范制定和工程应用参考。     

New polyimide–silica organic–inorganic hybrids

A series of polyimide–silica hybrid films with silica contents up to 30 wt % were successfully prepared by the sol‐gel reaction of tetraethoxysiliane in the presence of poly(amic acid) containing pendent hydroxyl groups. The films were yellow and transparent when the silica content was less than 11 wt %. The chemical structure of the films was characterized by Fourier transform infrared spectroscopy, and the morphology of the films was investigated by scanning electronic microscopy and atomic force microscopy. Thermogravimetric analysis, differential scanning calorimetry, and stress–strain tests were used to measure the performance of the films. The results indicate that the glass‐transition temperatures and decomposition temperatures of the hybrid films increased with increasing silica content, whereas the tensile strength had a maximum with the variety of silica contents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2210–2214, 2003     

Seeded Crystallization of Leucite

The leucite crystallization kinetics from a hydrothermally derived precursor seeded with nano-crystalline leucite was investigated by X-ray diffraction and non-isothermal differential thermal analysis. The nano-crystalline leucite was prepared by high-energy milling of high-purity leucite powder and the leucite precursor was prepared by the hydrothermal method of silica sol, aluminum nitrate, and potassium nitrate. After the seeds were introduced, the crystallization temperature of the precursor was lowered by 100°C and the transition phase kalsilite did not appear during the crystallization process. When the seeded precursor was heat treated at 700°C, a small amount of cubic leucite was stabilized to room temperature. The seeded precursor showed an exothermic peak between 800° and 920°C under different heating rates. The activation energy for the growth of leucite from the seeded precursor was 256(SD9) kJ/mol.     

Decolorisation and mineralisation of CI Reactive Black 8 by the Fenton and ultrasound/Fenton methods

The effects of pH, ferrous ion and hydrogen peroxide dosage on the decolorisation and mineralisation of CI Reactive Black 8 by the Fenton process with/without ultrasonic irradiation were investigated. It was verified that the presence of ultrasonic irradiation did not enhance the decolorisation of CI Reactive Black 8 significantly by Fenton's reagents, but it enhanced the chemical oxygen demand removal efficiency. The enhancement was more pronounced for lower (<0.89 mm) or higher (>1.78 mm) ferrous ion dosage. The optimal pH for chemical oxygen demand removal was 3.0. Chemical oxygen demand removal efficiency increased with the increasing H₂O₂ dosage and reached the highest level at 5.88 mm, but further increase in H₂O₂ dosage would not increase removal efficiency significantly.     

重介洗煤密度自控系统研究

目的：本文介绍了PLC在洗煤厂的介质密度控制中的应用,针对介质密度变化规律性不强,大滞后等特点作出调整。方法：采用VB编程语言结合专家算法的方针,提出了一个解决方案,提高了控制密度精度。结果：使物料浓度配比更加合理,趋势变化更容易让现场人员接受。结论：提高了产煤精度及生产效率,节约了能源的同时为洗煤厂创造更大的经济回报。     

机动车制动液的研制

介绍了合成型机动车制动液的生产和配方，讨论了物料组成对产品的影响。