基于PLC的水泥生料配料控制系统研究

1 率值控制工艺结构 衡量生料质量的标准是水泥的三个率值．石灰石饱和系数KH、硅酸率SM、铝氧率IM，即在出磨生料中，、Fe2O3、Al2O3、SiO2诸氧化物的百分比含量必须满足以下二三式：     

聚萘二甲酸乙二醇酯(PEN)的研究及发展

综述了聚萘二甲酸乙二醇酯(PEN)的发展历史,合成工艺,应用领域及其与PET的性能比较。     

Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

透明香皂的研制

介绍了生产透明香皂的新配方和新工艺 ,提出了透明香皂的企业标准。新工艺用丙二醇取代传统工艺所用的乙醇做溶剂 ,生产周期大为缩短。采用速冻隧道设备 ,可方便地实现不同品种的切换 ,操作方便 ,设备投资少 ,产品综合成本低 ,具有较大的工业应用价值     

心理资本前因变量研究

采用心理资本问卷对分别属于医药、建筑、水利工程、电信、通讯运营和服务行业的6家企业的员工进行了调查.根据对回收的283份有效问卷的统计分析,认为员工的性别、受教育程度和所在企业的性质对员工心理资本不会产生显著性影响,而员工年龄的影响显著,50岁以上员工的总体心理资本水平高于其他年龄段员工.     

我国高等学校法人治理结构的实施框架

高等学校法人治理结构的关键在于权力分配与权利制衡,目标在于真正落实高等学校的办学自主权。只有以现存的治理制度与组织结构为基础,引入现代企业治理结构和国外高等学校法人治理的经验,对高等学校的科层制管理结构进行改良,建立符合我国国情的高等学校法人治理结构,才是落实办学自主全权,完善自我管理的必要出路。     

Conditional probability Markov chain simulation based reliability analysis method for nonnormal variables

Based on fast Markov chain simulation for generating the samples distributed in failure region and saddlepoint approximation(SA) technique,an efficient reliability analysis method is presented to evaluate the small failure probability of non-linear limit state function(LSF) with non-normal variables.In the presented method,the failure probability of the non-linear LSF is transformed into a product of the failure probability of the introduced linear LSF and a feature ratio factor.The introduced linear LSF wh...     

改善钢桥面铺装层高温作用的有效措施

为了降低钢桥面铺装层内较高的温度,提高铺装材料使用性能,推迟桥面的早期破坏.采用有限元手段,以傅里叶传热定律为理论基础,根据气象部门提供的气象资料,对开放式钢箱梁及封闭式钢箱梁铺装层的温度场进行研究.结果表明:开放式箱梁可以降低桥面铺装层温度,降低高温持续作用时间,改变桥面铺装层高温的作用位置.     

Practical Control of a Ball-Screw-Driven Stage for Long-Range Nanometer Positioning

A DC motor and ball-screw-driven stage is studied for long-range nanometer positioning.The closed-loop system with high-gain PID controller is specially designed for high-precision point-to-point (PTP) positioning.A particular input shape of the closed-loop system is proposed to avoid overshoot and vibration by taking into account the nonlinear characteristics of the feed drive.Friction modeling and identification are avoided and the effect of friction is greatly suppressed by the controller.Experimental and simulated results demonstrate long-range nanometer positioning is achieved without overshoot.In PTP positioning from 10 mm down to 5 nm,the positioning error is within ±5 nm and response dynamic is satisfactory.     

Fabrication and characterization of nano silver powder prepared by spray pyrolysis

Silver powder was fabricated by spray pyrolysis, using 2%–20% AgNO₃ solution, 336–500 mL/h flux of AgNO₃ solution, 0.28–0.32 MPa flux of carrier gas and in the 620–820 °C temperature range. The effects of furnace set temperature, concentration of AgNO₃ aqueous solution, flux of AgNO₃ aqueous solution as well as carrier gas on the morphology and particle size distribution of silver powder, were investigated. The experimental results showed that with the high concentration of AgNO₃ aqueous solution, the average grain size of silver decreased with the increasing of furnace set temperature. But the gain size distribution was not homogenous, the discontinuous grain growth occurred. With the low concentration of AgNO₃ aqueous solution, the higher furnace set temperature made the nano sliver grains sintered together to grow. Nano silver powder about 100 nm was fabricated by spray pyrolysis, using 2wt% AgNO₃ solutions, 336 mL/h flux of AgNO₃ aqueous solution, 0.32 MPa flux of carrier gas at 720 °C furnace set temperature.