Three‐dimensional trajectory of electrospun polymer solution jet using digital holographic microscopy

The three‐dimensional trajectories of polymer solution jets during the electrospinning of polymer nanofibers were experimentally investigated. Test conditions included water solutions of polyethylene oxide (PEO) with concentrations typical of those producing beaded nanofibers, driving voltages ranging from 5 kV to 15 kV to generate a single polymer jet and injection pressures ranging from 0 kPa to 55 kPa. The present holographic imaging setup resolved the spatial growth of the bending instabilities, which is beneficial for validating numerical models. The results also showed the bead formation on the polymer fiber in‐flight. POLYM. ENG. SCI., 54:1765–1773, 2014. © 2013 Society of Plastics Engineers     

The HLD Study of Surfactant Partitioning for Oilfield Corrosion Inhibitors

The partitioning of corrosion inhibitor (CI) products is a measure of their potential to protect oilfield pipelines. In this paper the hydrophilic–lipophilic deviation (HLD) model is first used to quantify their partitioning in terms of the characteristic curvature (C _c,act) of a series of anionic (alkoxylated phosphate esters) and cationic (alkoxylated amines, aromatic amines, imidazoline acetates and quaternary amines) actives. This parameter is expressed over a range of pHs within which pipeline corrosion occurs. The HLD model is next used to predict the partitioning of each active from water into toluene at increased salinities. Linear mixing rules are lastly used to predict the characteristic curvature of Product A (C _c,mix) as a function of the C _c,act of a subset of actives.     

Structural and ion transport properties of [(AgI)x(AgBr)0.4−x](LiPO3)0.6 and (AgBr)x(LiPO3)(1−x) solid electrolytes

The (AgBr)_x(LiPO₃)_(1−x) (x=0.4 and 0.5) and [(AgI)_x(AgBr)_0.4−x](LiPO₃)_0.6 (x=0.1, 0.2, and 0.3) superionic electrolytes have been prepared by conventional melt quenching using a twin roller. These electrolytes are characterized by X-ray diffraction, SEM, and energy dispersive X-ray analysis (EDAX) for structural investigation. Electrical characterizations have been carried out by the AC impedance analysis. The conductivity of LiPO₃ glassy system at room temperature is improved by doping with the silver bromide (AgBr)_x(LiPO₃)_(1−x) and the mixture of silver iodide, silver bromide (AgI-AgBr-LiPO₃ system) up to 10⁻⁵ and 10⁻³ Ω⁻¹ cm⁻¹, respectively (improvements by four or five orders of magnitude). The frequency response of ionic conductivity has been analyzed by universal dynamic response model (Jonscher's law) and AC conductivity data are fitted using the Jonscher's power law. The conductivity values obtained by the power law and impedance plots are comparable. The frequency exponent (n) has a value between 0 and 1. The AgI-AgBr-LiPO₃ system shows the mixed alkali effect. Summerfield scaling master curve is temperature dependent, which may be due to the contribution of the both lithium and silver ions to ionic conduction.     

Copper‐Catalyzed Aerobic Formation of Unstable Sulfinyl Radicals for the Synthesis of Sulfinates and Thiosulfonates

Copper‐catalyzed aerobic coupling of thiols and alcohols affords sulfinates and thiosulfonates. These products are assumed to form via sulfinyl radicals which are not commonly found in oxidative coupling reactions of thiols. A reaction mechanism involving sulfinyl radicals is proposed, and mass and electron paramagnetic resonance (EPR) experimental results are provided.

     

A Novel Approach on Reusing Silicon Wafer Kerf Particle as Potential Filler Material in Polymer Composite

Silicon - In solar panel production stage, it is unavoidable to neglect the huge amount of solar grade silicon particles displaced during the slicing of silicon ingot operation. A subject of the...     

An Effective Approach on Attaining Enhanced Silicon Solar Cell Performance Through Sputter Deposited Perovskite Thin Films

Silicon - Antireflection coatings (ARCs) have become one of the key techniques for mass production of Si solar cells. They are generally performed by vacuum processes such as thermal evaporation,...     

Dynamic Effect of Soil-Tunnel Interface Under Dynamic Loading

Soil Mechanics and Foundation Engineering - The resilience of the Daikai subway station during the Kobe earthquake is taken as a case study of tunnel endurance at various points under different...     

Experimental investigation of lift enhancement by suction-assisted delayed separation of the boundary layer on NACA 0012 airfoil

In the aerodynamic industry, one of the major problems of interest is the lift enhancement without any increase in the drag. In this paper, an attempt is made to increase the lift coefficient by delayed boundary layer separation using suction at various points, also the study is carried out to identify the optimum location for suction which provides maximum lift augmentation. The experiment is conducted with selected suction pressures of 60, 70, 80, 90?kN/m² at different locations in the range of 40–75% of the chord length of the airfoil. Among the selected pressures, the lowest one at the 70% length provides maximum performance. The critical Reynolds number occurs at around 95% of the length instead of 45% of the length when the same experiment is conducted without suction. The suction also assists in the heat transfer enhancement over the airfoil surface.     

Experimental Search for Chemical Compositions of Superelastic Titanium Alloys with Enhanced Functional Properties

Metal Science and Heat Treatment - Ti – Zr-based alloys with a high zirconium content prepared by vacuum-arc remelting with nonconsumable tungsten electrode are studied. The optimum number of...     

Effect of Heat Treatment on Dendritic Segregation and High-Temperature Strength of Single Crystals of Ni3Al-Base Rhenium-Alloyed Intermetallic Alloys

Metal Science and Heat Treatment - The nature of stability of dendritic microsegregation of rhenium in single crystals of intermetallic (γ′ + γ) alloys based on γ′-Ni3Al...