Collective modes and a theory of response ofd-wave superconductors

We present a theory of the response ofd-wave superconductors to weak applied fields, by taking account of the Coulomb interaction and all the collective degrees of freedom as well as crystal symmetry. We choose two representative phases: the d phase, which has point nodes in the energy gap, and theY _2–1 phase, which has line as well as point nodes. The former is a self-consistent solution for cubic as well as spherical symmetries and the latter is one for spherical, cubic, and hexagonal symmetries. We obtain obviously gauge-invariant expressions for the order-parameter fluctuations and the currents, having forms common not only to thed-wave states, but also to thep-wave states studied earlier. We also investigate the collective excitations; in the long-wavelength limit for spherically symmetric systems, there are, on the frequency-temperature plane, seven branches for eachd-wave phase considered, in addition to the common plasma mode and orbital Goldstone modes resulting from the spontaneous breakdown of the rotational invariance. In theY _2–1-phase two eigenmodes are found to become gapless at a finite temperature, below which they are purely imaginary. This implies instability of the phase. The effect of crystal anisotropy on the collective spectra is also studied.A preliminary report on the present work was published inJpn. J. Appl. Phys. Suppl. 26-3, 167 (1987).     

Analysis of weakly guiding cladded acoustic fibers of hexagonal crystal symmetry

An approximate analysis of the weakly guiding cladded acoustic fiber consisting of a core and infinite thick cladding both with hexagonal crystal symmetry is presented. The crystalline Z axis is parallel to the fiber axis. Weak guidance conditions require that the stiffness constants of the core are slightly less than those of the cladding, and the density of the core and cladding are almost the same. Approximate dispersion and cutoff equations are derived for all pure guided modes. Dispersion curves of several lower-order guided torsional, radial-axial and flexural modes are evaluated using both exact and approximate formulas and they are in good agreement. A simple approximate dispersion equation for leaky (longitudinal-type) modes is also obtained.     

PSONN在可编程控制系统PID参数优化中的应用

研究可编程控制系统优化问题,可编程控制系统具有非线性、时变性等特点,传统PID控制器优化方法难以建立精确的数学模型,使得系统参数设定困难,导致可编程控制系统的控制效果不理想。为了解决传统的PID算法所带来的问题,利用RBF神经网络非线性、自学习能力,提出一种基于粒子群神经网络的PID参数优化算法。将粒子群和神经网络相结合,形成了一种智能控制算法,并将应用于可编程控制系统。测试结果表明,粒子群神经网络提高了PID控制参数优化速度,提高了可编程控制系统可靠性和鲁棒性,具有一定的理论和实用价值。     

基于Android平台的无线WiFi控制方法

提出了一种基于Android手机的无线WiFi控制系统。首先采用嵌入式ARM9为硬件控制模块,手机终端以Android为应用程序的开发,编写了一个手机客户端软件,完成了手机端与控制器端之间的数据传输,实现了手机远程对PWM调速等的控制。系统中Android手机可利用周围无线网络资源与其他设备进行交互并实施控制,不仅为现有智能控制系统提供了新的控制方法,也为实现机器与人的信息交换提供了新的交互手段。     

Intermediate temperature solid oxide fuel cell based on fully integrated plasma-sprayed components

This work addresses the fabrication of membrane-type solid oxide fuel cells (SOFCs) operating at medium temperatures, where all components are fabricated by plasma spray technology, and the evaluation of the performance of the SOFC single unit in a temperature range of 500 to 800 °C. Single cells composed of LaSrMgO₃ cathodes, LaSrGaMgO₃ (LSGM) electrolytes, and Ni/yttria-stabilized zirconia anodes were fabricated in successive atmospheric plasma-spraying processes. Plasma-spraying processes have been optimized and tailored to each layer to achieve highly porous cathode and anode layers as well as high-density electrolyte layers. A major effort has been devoted to the production of the LSGM electrolyte that has a high density and is free of cracks. Electrochemical impedance spectroscopy was used to investigate the conductivity of the electrode layers, and particularly the resistance of the electrolyte layer. It revealed that the heat treatment had a great influence on the specific conductivity of the sprayed electrolyte layers and that the specific conductivity of the heat-treated layers was dramatically increased to the same magnitude as is typical for sintered LSGM pellets. The experimental results have demonstrated that the plasma-spraying process has a great potential for the integrated fabrication of medium-temperature SOFC units. The original version of this article was published as part of the ASM Proceedings, Thermal Spray 2003: Advancing the Science and Applying the Technology, International Thermal Spray Conference (Orlando, FL), May 5–8, 2003, Basil R. Marple and Christian Moreau, Ed., ASM International, 2003.     

DD—921钢铁常温发黑剂的研制和应用

研究了钢铁常温发黑过程的成膜机理,各组分之间的作用以及相互之间的影响,着重分析了常温发黑的优缺点,工艺控制参数以及经济性。     

DECOMPOSITION AND PRECIPITATION OF CARBIDES IN HOT-ROLLED Si-Fe SHEETS

在高温金相显微镜下,直接观察碳化物在热轧硅钢中的分解与析出过程。指出冷却速度对碳化物析出形态有很大影响。用差热分析确定了碳化物的分解与析出温度。所得结果为改进热轧硅钢生产工艺提供了重要的依据。     

基于LabVIEW软件的虚拟数字超声探伤仪设计

传统的仪器一般开发周期较长,分析测试的精度低、成本高。虚拟仪器是利用计算机显示器的显示功能来模拟传统仪器的控制面板,以多种形式输出检测结果;利用软件功能实现数字信号的运算、分析和处理;利用输入/输出(I/O)接口设备完成信号的采集、测量与调试,从而完成各种测试功能的一种计算机仪器系统。采用LabVIEW应用软件对数字式超声探伤仪面板和部分功能进行设计与构建,并实现其相关功能。     

大型钛合金压气机盘超塑性等温锻造模具结构及工艺参数实验研究

通过超塑拉伸和压缩试验，用金属铅进行模拟实验，探讨了大型ＴＣ１１合金压气机盘超塑性等温锻造的工艺参数，模具结构，锻坯形状尺寸及润滑剂的选择、并讨论了其模具材料及加热方式的选择。     

LD7铝合金时效工艺的研究

通过试验系统地研究了ＬＤ７铝合金的单级和两级时效工艺。结果表明，与传统的单级时效相比，两级时效在不降低室温强度，硬度的前提下，可显著提高合金的电导率及高温性能。