Achieving the Sustainable Development Goals: improving water services in cities affected by extreme weather events

Abstract

This article discusses how key risks from extreme weather events might affect progress towards meeting Sustainable Development Goals 6 and 11 in cities in developing countries. It outlines the magnitude of the existing shortfall in safe water and sanitation services, and how climate change will exacerbate existing problems. It argues that the performance of many governments thus far has lacked urgency and purpose. Unless governments in particular become more committed, with redoubled effort, the goals are unlikely to be achieved.     

Effect of Pheromone Dispenser Density on Timing and Duration of Approaches by Peachtree Borer

The timing and duration of approaches by male peachtree borer Synanthedon exitiosa Say (Lepidoptera: Sesiidae) to commercial pheromone dispensers placed singly or at high density in peach orchards was determined by using field-deployed video cameras and digital video recorders. Cameras were trained on one dispenser, and one standard lure was placed in a peach orchard, and on 12 dispensers in a separate orchard where dispensers for mating disruption had been placed at 371 per hectare. Male moth approaches were video recorded at the peak of peachtree borer annual flight, from 13 to 18 August 2009. The mean approach timing (h:min:sec±SD) during the study period was 11:33:12 ± 00:46:43, 11:43:52 ± 00:45:58, and 11:41:21 ± 00:45:54 AM with the single dispenser, high-density dispensers, and lure, respectively. Day-to-day variability in approach timings suggested that there were no biologically significant differences among treatments. The frequency distribution of approach durations varied among treatments, as the high-density dispensers had mostly short approaches, while the distribution of approaches to the single dispenser and lure was wider. The median (interquartile range) approach duration was 3 (2–4), 1 (1–2), and 4 (2–6) seconds with the single dispenser, high-density dispensers, and lure, respectively. The relative rank of median approach durations was constant throughout the period, indicating differences among treatments. This study showed that the presence of pheromone dispensers for mating disruption did not cause an advancement of peachtree borer diel rhythm of response. Shorter approaches to dispensers placed at high density than singly suggest that dispenser retentiveness is not constant with peachtree borer, which may bias estimates of disruption activity as a function of dispenser density.     

Symmetric Equations for Evaluating Maximum Torsion Stress of Rectangular Beams in Compliant Mechanisms

There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions of the crosssection(i.e., the thickness and the width). After reviewing the available equations, two thickness-to-width ratio Independent equations that are symmetric with respect to the two dimensions are obtained for evaluating the maximum torsion stress of rectangular cross-section beams. Based on the resulting equations, outside lamina emergent torsional joints are analyzed and some useful design Insights are obtained. These equations, together with the previous work on symmetric equations for calculating torsional compliance, provide a convenient and effective way for designing and optimizing torsional beams in compliant mechanisms.     

Daguerreotype Portraiture

Abstract

Facing the Light is a major national exhibition of 110 daguerreotype portraits gathered from 35 sources. In his introduction to this catalogue for the exhibition, Pfister outlines his criteria for selection in the National Portrait Gallery's show. For consideration, the works had to be ‘unmistakably identified portraits of nationally prominent individuals … [whose] inclusion was first determined by the existence of a striking example of the daguerrean [sic] art’. This respect for the medium, as well as for the likenesses represented, makes the book a happy blend that should appeal to a broad audience. It is fitting that a national exhibition sponsored in part by the government and in part by the public-minded Polaroid Corporation should have set itself this task.     

Meeting residential space heating demand with wind-generated electricity

Worldwide, many electricity suppliers are faced with the challenge of trying to integrate intermittent renewables, notably wind, into their energy mix to meet the needs of those services that require a continuous supply of electricity. Solutions to intermittency include the use of rapid-response backup generation and chemical or mechanical storage of electricity. Meanwhile, in many jurisdictions with lengthy heating seasons, finding secure and preferably environmentally benign supplies of energy for space heating is also becoming a significant challenge because of volatile energy markets.Most, if not all, electricity suppliers treat these twin challenges as separate issues: supply (integrating intermittent renewables) and demand (electric space heating). However, if space heating demand can be met from an intermittent supply of electricity, then both of these issues can be addressed simultaneously. One such approach is to use off-the-shelf electric thermal storage systems.This paper examines the potential of this approach by applying the output from a 5.15 MW wind farm to the residential heating demands of detached households in the Canadian province of Prince Edward Island. The paper shows that for the heating season considered, up to 500 households could have over 95 percent of their space heating demand met from the wind farm in question. The benefits as well as the limitations of the approach are discussed in detail.     

Detecting and ordering salient regions

We describe an ensemble approach to learning salient regions from arbitrarily partitioned data. The partitioning comes from the distributed processing requirements of large-scale simulations. The volume of the data is such that classifiers can train only on data local to a given partition. Since the data partition reflects the needs of the simulation, the class statistics can vary from partition to partition. Some classes will likely be missing from some or even most partitions. We combine a fast ensemble learning algorithm with scaled probabilistic majority voting in order to learn an accurate classifier from such data. Since some simulations are difficult to model without a considerable number of false positive errors, and since we are essentially building a search engine for simulation data, we order predicted regions to increase the likelihood that most of the top-ranked predictions are correct (salient). Results from simulation runs of a canister being torn and from a casing being dropped show that regions of interest are successfully identified in spite of the class imbalance in the individual training sets. Lift curve analysis shows that the use of data driven ordering methods provides a statistically significant improvement over the use of the default, natural time step ordering. Significant time is saved for the end user by allowing an improved focus on areas of interest without the need to conventionally search all of the data.     

An X-ray Radiography Study of the Effect of Thermal Cycling on Damage Evolution in Large-Area Sn-3.5Ag Solder Joints

There is a need for next-generation, high-performance power electronic packages and systems utilizing wide-band-gap devices to operate at high temperatures in automotive and electricity transmission applications. Sn-3.5Ag solder is a candidate for use in such packages with potential maximum operating temperatures of about 200°C. However, there is a need to understand the thermal cycling reliability of Sn-3.5Ag solders subject to such high-temperature operating conditions. The results of a study on the damage evolution occurring in large-area Sn-3.5Ag solder joints between silicon dies and direct bonded copper substrates with Au/Ni-P metallization subject to thermal cycling between 200°C and 5°C are presented in this paper. Interface structure evolution and damage accumulation were followed using high-resolution X-ray radiography, cross-sectional optical and scanning electron microscopies, and X-ray microanalysis in these joints for up to 3000 thermal cycles. Optical and scanning electron microscopy results showed that the stresses introduced by the thermal cycling result in cracking and delamination at the copper–intermetallic compound interface. X-ray microanalysis showed that stresses due to thermal cycling resulted in physical cracking and breakdown of the Ni-P barrier layer, facilitating Cu-Sn interdiffusion. This interdiffusion resulted in the formation of Cu-Sn intermetallic compounds underneath the Ni-P layer, subsequently leading to delamination between the Ni-rich layer and Cu-Sn intermetallic compounds.     

Multitasking across generations: Multitasking choices and difficulty ratings in three generations of Americans

This study investigated whether changes in the technological/social environment in the United States over time have resulted in concomitant changes in the multitasking skills of younger generations. One thousand, three hundred and nineteen Americans from three generations were queried to determine their at-home multitasking behaviors. An anonymous online questionnaire asked respondents to indicate which everyday and technology-based tasks they choose to combine for multitasking and to indicate how difficult it is to multitask when combining the tasks. Combining tasks occurred frequently, especially while listening to music or eating. Members of the “Net Generation” reported more multitasking than members of “Generation X,” who reported more multitasking than members of the “Baby Boomer” generation. The choices of which tasks to combine for multitasking were highly correlated across generations, as were difficulty ratings of specific multitasking combinations. The results are consistent with a greater amount of general multitasking resources in younger generations, but similar mental limitations in the types of tasks that can be multitasked.     

Interpreting enhanced Hg oxidation with Br addition at Plant Miller

This paper introduces the first detailed reaction mechanisms for Br/Hg chemistry in flue gas, and interprets the Hg oxidation performance across a broad range of Br injection rates in recent field tests at Plant Miller. Homogeneous chemistry with Br species is much faster than with Cl species because the Br atom concentrations at the furnace exit are three to four orders of magnitude greater. The dominant channels with Br are analogous to those for Cl, whereby a Br atom partially oxidizes Hg⁰ into HgBr which is then oxidized into HgBr₂ by Br₂. Mercury also oxidizes heterogeneously on unburned carbon (UBC) with Br species. This mechanism is also analogous to the surface mechanism for Cl species, except that (i) Hg⁰ adsorption is faster on brominated sites and (ii) the high Br atom concentrations promote recombination reactions which maintain very low surface coverages of Hg/Br species. Hence, Br addition does not promote the production of particulate-Hg. Catalytic Hg⁰ oxidation on SCR monoliths by Br species is more than 40 times faster than by Cl species and follows a similar mechanism. For all Br loadings over 10 ppmw in the field tests, essentially all Hg⁰ entering the SCR was oxidized.