Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

An efficient return algorithm for non-associated plasticity with linear yield criteria in principal stress space

An efficient return algorithm for stress update in numerical plasticity computations is presented. The yield criterion must be linear in principal stress space and can be composed of any number of yield planes. Each of these yield planes may have an associated or non-associated flow rule. The stress return and the formation of the constitutive matrix is carried out in principal stress space. Here the manipulations simplify and rely on geometrical arguments. The singularities arising at the intersection of yield planes are dealt with in a straightforward way also based on geometrical considerations. The method is exemplified on non-associated Mohr–Coulomb plasticity throughout the paper.     

Durability of polymeric glazing materials for solar applications

The economic viability of solar collector systems for domestic hot water (DHW) generation is strongly linked to the cost of such systems. Installation and hardware costs must be reduced by 50% to allow significant market penetration. An attractive approach to cost reduction is to replace glass and metal parts with less expensive, lighter weight polymeric components. Weight reduction decreases the cost of shipping, handling, and installation. The use of polymeric materials also allows the benefits and cost savings associated with well established manufacturing processes, along with savings associated with improved fastening, reduced part count, and overall assembly refinements. A key challenge is to maintain adequate system performance and assure requisite durability for extended lifetimes. Results of preliminary and ongoing screening tests for a large number of candidate polymeric glazing materials are presented. Based on these results, two specific glazings with moderate and poor weathering stability are selected to demonstrate how a service lifetime methodology can be applied to accurately predict the optical performance of these materials during in-service use. A summary is given for data obtained by outdoor exposure and indoor testing of polyvinyl chloride (PVC) and high temperature modified polycarbonate copolymer (coPC) materials, and an initial risk analysis is given for the two materials. Screening tests and analyses for service lifetime prediction are discussed. A methodology that provides a way to derive correlations between degradation experienced by materials exposed to controlled accelerated laboratory exposure conditions and materials exposed to in-service conditions is given, and a validation is presented for the methodology based upon durability test results for PVC and coPC.     

Estimating thermal stress in BIPV modules

The thermal stress on building‐integrated photovoltaic modules (BIPV) in Espoo, Finland, was studied with field‐testing of amorphous silicon modules. Based on these results, the thermal stress at two other European locations (Paris and Lisbon) was estimated. The estimation procedure entailed thermal modelling of heat transfer in the façade with meteorological data as input. The results indicate that the thermal stress on BIPV modules in Lisbon is, in this case, approximately 50% higher that in Espoo and between 80 and 200% higher than in Paris, depending on the activation energy of the degradation process. The difference in stress between a BIPV module and a free‐standing module in Espoo was 50–200%. Copyright © 2006 John Wiley & Sons, Ltd.     

An overall model for maintenance optimization

This paper presents an approach for identifying the optimal maintenance schedule for the components of a production system. Safety, health and environment objectives, maintenance costs and costs of lost production are all taken into consideration, and maintenance is thus optimized with respect to multiple objectives. Such a global approach to maintenance optimization requires expertise from various fields, e.g., decision theory, risk analysis and reliability and maintenance modelling. Further, a close co-operation between management, maintenance personnel and analysts is required to achieve a successful result. In the past this has been a major obstacle to the extensive use of proper maintenance optimization methods in practice, and techniques to promote the communication between the involved parties of the optimization process is an essential element in the suggested approach. A simple step by step presentation of the required modelling is provided. Contrary to most current methods of RCM (Reliability Centered Maintenance), the approach is based on an analytic model, and therefore gives a sound framework for carrying out a proper maintenance optimization. The approach is also flexible as it can be carried out at various levels of detail, e.g., adopted to available resources and to the managements willingness to give detailed priorities with respect to objectives on safety vs production loss.     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.     

Incidence of neoplasms in ages 0-19 y in parts of Sweden with high 137Cs fallout after the Chernobyl accident

An experiment was conducted to elucidate the origin of tetraploids (2n = 4x = 44) of Paragonimus westermani that occur together with diploid (2n = 2x = 22) and triploid (2n = 3x = 33) types in Liaoning Province, the People's Republic of China. Metacercariae of the diploid type, obtained from Hyogo Prefecture, Japan, and those of the triploid type from Tsushima, Nagasaki Prefecture, Japan, were mixed and inoculated into dogs and cats. The following results were obtained. The flukes were found in pairs within cysts in random combinations of 2x + 2x, 2x + 3x, and 3x + 3x (7:15:7). Oocytes in the oviduct were at stages from diplotene to metaphase. In a triploid fluke encysted with a diploid fluke, the primary oocytes were intruded by sperms from the diploid fluke. In the primary oocytes of diploid as well as triploid flukes, from diplotene to diakinesis, the homologues of the nucleolar chromosomes were heteromorphic as far as the size of the short arm was concerned. This implies that the triploid is an autotriploid generated in an ancestral diploid population that was polymorphic for the nucleolar chromosome.     

Monte Carlo and analytical calculation of proton pencil beams for computerized treatment plan optimization

Proton pencil beams in water, in a format suitable for treatment planning algorithms and covering the radiotherapy energy range (50-250 MeV), have been calculated using a modified version of the Monte Carlo code PTRAN. A simple analytical model has also been developed for calculating proton broad-beam dose distributions which is in excellent agreement with the Monte Carlo calculations. Radial dose distributions are also calculated analytically and narrow proton pencil-beam dose distributions derived. The physical approximations in the Monte Carlo code and in the analytical model together with their limitations are discussed. Examples showing the use of the calculated set of proton pencil beams as input to an existing photon treatment planning algorithm based on biological optimization are given for fully 3D scanned proton pencil beams; these include intensity modulated beams with range shift and scanning in the transversal plane.     

Evidence for Remote Effects of Dreissenid Mussels on the Amphipod Diporeia: Analysis of Lake Ontario Benthic Surveys, 1972–2003

The status of invasive dreissenid mussels (Dreissena polymorpha and D. bugensis) and native amphipods (Diporeia spp.) in Lake Ontario was assessed in 2003 and compared with historical data. D. polymorpha (zebra mussels) were rarely observed in 2003, having been displaced by D. bugensis (quagga mussels). D. bugensis expanded its depth range from 38 m depth in 1995 to 174 m in 2003 and this dreissenid reached densities averaging 8,000/m² at all sites < 90 m. During the same time period, Diporeia populations almost completely disappeared from 0–90 m depth, continuing a declining trend from 1994–1997 reported in previous studies. The average density of Diporeia in the 30–90 m depth interval decreased from 1,380/m² to 63/m² between 1997 and 2003. Prior to 2003, areas deeper than 90 m represented a refuge for Diporeia, but even these deep populations decreased, with densities declining from 2,181/m2 in 1999 to 545/m2 in 2003. Two common hypotheses for the decline of Diporeia in the Great Lakes are food limitation and a toxin/pathogen associated with dreissenid pseudofeces. The Diporeia decline in deep waters preceded the expansion of D. bugensis to these depths, and suggests that shallow dreissenid populations remotely influence profundal habitats. This pattern of decline is consistent with mechanisms that act from some distance including nearshore dreissenid grazing and downslope transport of pseudofeces.