Antioxidant capacity and total phenolics of <Emphasis Type="Italic">Cyphostemma digitatum</Emphasis> before and after processing: use of different assays

In the framework of standardisation of new healthy food sources, this paper aimed to study the total phenolics and the antioxidant power of Cyphostemma digitatum (Vitaceae) in water and ethanol extracts, using 96-well micro plates with BMG FLUOstar Optima micro plate reader. Total phenolics by Folin–Ciocalteu method in the water extracts were significantly lower after processing, decreasing from 1.41 ± 0.06 g GAE/100 g in the raw leaves to 0.80 ± 0.08 g GAE/100 g in the processed sample; the ethanol extract revealed the same trend with higher values, decreasing from 1.95 ± 0.03 to 1.56 ± 0.12 g GAE/100 g. The antioxidant capacity was elucidated by four methods: TEAC, DPPH, FRAP and ORAC. No or very weak correlations were found between antioxidant assays and total phenolics; this confirms that the antioxidant capacity could be attributed to other molecules. The ORAC assay proved to be more powerful than the other assays; it showed 103.3 ± 2.5 mmol/100 g Trolox equivalents in the raw leaves ethanol extract and 91.9 ± 3.0 mmol/100 g in the processed sample. ORAC assay showed the opposite for the water extract where the antioxidant capacity increased from 16.7 ± 0.2 to 41.7 ± 2.7 mmol/100 g Trolox equivalents after processing, which could be attributed to new water-soluble compounds generated in the consumed form.     

Application of sol gel spin coated yttria-stabilized zirconia layers for the improvement of solid oxide fuel cell electrolytes produced by atmospheric plasma spraying

Due to its high thermal stability and purely oxide ionic conductivity, yttria-stabilized zirconia (YSZ) is the most commonly used electrolyte material for solid oxide fuel cells (SOFCs). Standard electrolyte fabrication techniques for planar SOFCs involve wet ceramic techniques such as tape-casting or screen printing, requiring sintering steps at temperatures above 1300 °C. Plasma spraying (PS) may provide a more rapid and cost efficient method to produce SOFCs without sintering. High-temperature sintering requires long processing times and can lead to oxidation of metal alloys used as mechanical supports, or to detrimental interreactions between the electrolyte and adjacent electrode layers. This study investigates the use of spin coated sol gel derived YSZ precursor solutions to fill the pores present in plasma sprayed YSZ layers, and to enhance the surface area for reaction at the electrolyte-cathode interface, without the use of high-temperature firing steps. The effects of different plasma conditions and sol concentrations and solid loadings on the gas permeability and fuel cell performance have been investigated.     

Simulating the effects of climate change,economic and urban planning scenarios on urban runoff patterns of a metropolitan region

Urban development and climate change are expected to have significant effects on urban stormwater runoff. In this study, the Dynamic Urban Water Simulation Model (DUWSiM) is applied to Dublin, Ireland, to explore urban runoff patterns under varying urban growth and climate scenarios. Results show that annual urban runoff could decrease by 3.0% from climate change and monthly runoff could increase by 30% in winter and decrease by 28% in summer. Results also indicate that urban growth could increase annual runoff by up to 15%. The combined effect of climatic and land-use change generated runoff may potentially increase annual totals from between 2.9% to 21%. Monthly changes in runoff totals could increase by up to 57%. Accommodating these variations in runoff between the scenarios, flexible decentralised systems such as green roofs and pervious pavements, have a vital role in increasing the adaptability and long term sustainability of water infrastructure.     

Air entrapment in sheet molding compounds (SMC)

Entrapped air can commonly lead to large delaminations in thick walled sheet molding compound (SMC) products. In this work different sources of air entrapment in SMC are investigated. The critical process is shown to be the impregnation of the fibers. If no surface active additives are used, large volumes of air may be entrapped in this process, unless the viscosity of the compound is very low. In this situation of poor wetting, the viscosity of the compound during fiber impregnation will critically determine the interlaminar, tensile strength of the product. However, if surface active additives are used, the air escapes entrapment even at relatively high viscosities. The lowering of the viscosity, which is a side effect of the additives, has practically no importance under these conditions of good wetting. Large numbers of small air bubbles are also entrapped during the mixing of the components, but it is shown that these bubbles have very little effect on the mechanical properties of the finished part.     

Comparative system analysis of direct steam generation and synthetic oil parabolic trough power plants with integrated thermal storage

Parabolic trough power plants are currently the most commercially applied systems for CSP power generation. To improve their cost-effectiveness, one focus of industry and research is the development of processes with other heat transfer fluids than the currently used synthetic oil. One option is the utilization of water/steam in the solar field, the so-called direct steam generation (DSG).Several previous studies promoted the economic potential of DSG technology (Eck et al., 2008b, Price et al., 2002, Zarza, 2002). Analyses’ results showed that live steam parameters of up to 500 °C and 120 bars are most promising and could lead to a reduction of the levelized electricity cost (LEC) of about 11% (Feldhoff et al., 2010). However, all of these studies only considered plants without thermal energy storage (TES).Therefore, a system analysis including integrated TES was performed by Flagsol GmbH and DLR together with Solar Millennium AG, Schott CSP GmbH and Senior Berghöfer GmbH, all Germany. Two types of plants are analyzed and compared in detail: a power plant with synthetic oil and a DSG power plant. The design of the synthetic oil plant is very similar to the Spanish Andasol plants (Solar Millennium, 2009) and includes a molten salt two-tank storage system. The DSG plant has main steam parameters of 500 °C and 112 bars and uses phase change material (PCM) for the latent and molten salt for the sensible part of the TES system. To enable comparability, both plants share the same gross electric turbine capacity of 100 MWel, the same TES capacity of 9 h of full load equivalent and the same solar multiple of the collector field of about two.This paper describes and compares both plants’ design, performance and investment. Based on these results, the LEC are calculated and the DSG plant’s potential is evaluated. One key finding is that with currently proposed DSG storage costs, the LEC of a DSG plant could be higher than those of a synthetic oil plant. When considering a plant without TES on the other hand, the DSG system could reduce the LEC. This underlines the large influence of TES and the still needed effort in the development of a commercial storage system for DSG.     

Parabolic dish concentrators approximated by simple surfaces

Two different concentrating mirrors have been constructed that resemble parabolic dish reflectors. Both mirrors are made of slightly curved strips of flat, bendable material. The strips of the most simplified mirror have only large-radius circles and straight lines as boundaries. The necessary equations for making the mirrors are given. Also a simple way to make a stiff, lightweight frame and support for the mirror strips has been developed. Models of the mirrors have been built and successfully used for cooking and baking.     

Social identity,safety climate and self-reported accidents among construction workers

The construction industry has one of the highest frequencies of work-related accidents. We examined whether construction workers predominantly identify themselves in terms of their workgroup or in terms of the construction site. In addition, we examined the associations between social identity and safety climate, and how these constructs are associated with work-related accidents. The analyses were based on questionnaire responses from 478 construction workers from two large construction sites, and the methods involved structural equation modeling. Results showed that the workers identified themselves primarily with their workgroup, and to a lesser degree with the construction site. Social identity and safety climate were related both at the workgroup and construction site levels, meaning that social identity may be an antecedent for safety climate. The association between social identity and safety climate was stronger at the workgroup level than at the construction site level. Finally, safety climate at both levels was inversely associated with self-reported accidents, with the strongest association at the workgroup level. A focus on improving safety climate, particularly by integrating initiatives at both the workgroup and management level, may have the potential to improve safety performance and thus decrease the risk of accidents and injuries on construction sites.     

In situ studies of the decomposition of ammonium uranyl carbonate in an electron microscope

An electron microscope has been used to study the reduction of ammonium uranyl carbonate (AUC) to UO₂. The reactions could be followed both in the diffraction and the lattice image mode. The first intermediate obtained was amorphous UO₃. Depending on the experimental conditions, either crystalline UO₂ was formed directly from this phase, or several other intermediates were indicated.Properties like crystallinity and crystallite size of final UO₂ were found to be a function of experimental conditions. Comparisons with properties of UO₂ from the industrial process have been made.     

Catalytic Encounters at the Molecular Level: Gabor A. Somorjai Award Symposium for Creative Research in Catalysis in Honor of Professor Manos Mavrikakis

Topics in Catalysis -