Microwave assisted click chemistry on a conductive polymer film

Microwave (MW) irradiation has been used to accelerate the functionalization of an azide functional poly(3,4-ethylenedioxythiophene) film by click chemistry. The absorption of MW energy by the conductive polymer has been exploited for localized activation of the reaction on the polymer surface. By use of an alkyne modified fluorescein derivative the reaction conditions have been optimized in a conventional MW oven, enabling the use of different sizes of substrates. The optimization resulted in a reduction of reaction times of approximately 20 h to only 2 min for bulk film functionalization. The method has been applied for anchoring of the chelating agent nitrilotriacetic acid (NTA) on the conductive polymer. The chelating linkage ability of NTA on the surface was investigated through a sandwich ELISA study confirming the selective bonding of a histidine tagged protein.     

Clocked power control circuit for inductively powered devices

Inductively powered devices are finding increasing use in many applications, such as biomedical implants and radio frequency identification (RFID) tags. In these systems, because of transmitter and receiver movements, the receiver coil may get close to the transmitter coil, which results in more than needed power delivered to the receiver load. This increases heat dissipated in the receiver circuit. In order to avoid overheating the receiver in such a high magnetic field (short coil separation distance) condition, the received power should be monitored and controlled. This paper introduces a clocked power control circuit integrated in the implant receiver, which is an independent, automatic power adjustment solution to limit heat dissipation with response to the coil separation distance. In this circuit, the rectified voltage across the load is monitored, and converted to a digital representation to selectively detune the receiver inductor-capacitor (LC) tank. To demonstrate this concept, a design example applied to inductively powered implants is given. Measurements on the prototype with a varied coil separation distance validate the desired power control functionality. Less power dissipation is achieved for the receiver compared to no power control condition.     

Exploiting citation overlaps for Information Retrieval: Generating a boomerang effect from the network of scientific papers

A new citation search strategy is proposed for Information Retrieval (IR) based on the principle of polyrepresentation (Ingwersen, 1992, 1996). The strategy exploits logical overlaps between a range of cognitively different interpretations of the same documents in a structured manner, i.e. so-called cognitive overlaps of representations. The strategy is essentially a "cycling strategy" starting with documents retrieved by a subject search, wherefrom new documents are identified automatically by following the network of citations in scientific papers backwards and forwards in time. In contrast to earlier citation search strategies the proposed strategy does not require known relevant documents (seed documents) as a starting point, but may be based on a subject search. A pilot study is reported where the ability of the strategy to retrieve additional relevant documents is analysed. Results show that a very large amount of documents can be retrieved by the strategy, and that these may be segmented in a number of distinct "overlap levels". It is demonstrated that the combined core of the higher-level overlaps contains higher relevance density than found in the original retrieval results. Based on these results it is suggested that the documents be displayed in order of their presence in higher-level overlaps, so as to maximise the chances that as many relevant documents as possible will be presented first to a user. This revised version was published online in June 2006 with corrections to the Cover Date.     

Determination of ionisation energies and attempt-to-escape factors using thermally stimulated conductivity

A procedure for determining an arbitrary distribution of activation energies (E) and attempt-to-escape frequencies (s) from overlapping contributions to thermoluminescence (TL) or thermally stimulated conductivity (TSC) is described. For the case of no retrapping, i.e. first order kinetics, the glow curve can be described by a two-dimensional Fredholm equation representing a superposition of Randall-Wilkins first-order peak shapes. The solution to this equation gives the distribution of trapping energies and attempt-to-escape-frequency factors necessary to obtain the TL or TSC peak shape. Analysis of simulated TL/TSC data for trap distributions distributed in both E and s demonstrates that the arbitrary E and s values can be determined from the solution of the Fredholm equation. The procedure is demonstrated for experimental TSC data from gamma-irradiated Al2O3:C.     

Paper and plastic in daily diary research: Comment on Green, Rafaeli, Bolger, Shrout, and Reis (2006).

The authors applaud A. S. Green, E. Rafaeli, N. Bolger, P. E. Shrout, and H. T. Reis's (2006) response to one-sided comparisons of paper versus electronic (plastic) diary methods (see record 2006-03820-006) and hope that it will stimulate more balanced considerations of the issues involved. The authors begin by highlighting areas of agreement and disagreement with Green et al. The authors review briefly the broader literature that has compared paper and plastic diaries, noting how recent comparisons have relied on study designs and methods that favor investigators' allegiances. The authors note some sorely needed data for the evaluation of the implications of paper versus plastic for the internal and external validity of research. To facilitate evaluation of the existing literature and assist in the design of future studies, the authors offer a balanced comparison of paper and electronic diary methods across a range of applications. Finally, the authors propose 2 study designs that offer fair comparisons of paper and plastic diary methods. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Software process improvement in small organizations: a case study

The Capability Maturity Model for software has become a major force in software development process improvement. We looked at the role of process improvement in the context of a small organization. Although the Capability Maturity Model integration is replacing the CMM, we focused on the older CMM. We had to look at more than which CMM key process areas apply to small businesses. Our overall goal was to institute good software development practices, we used the language of the CMM to gain the management's cooperation. Applying these practices is essential to managing growth, yet undertaking this effort without prior experience could impede a small company's innovative nature. This case study's purpose was to investigate the success factors of a software process improvement effort for a small software development organization.     

Non-occupational ladder and scaffold fall injuries

In the period 1988–1997 a series of 1462 patients aged 15 years or older with non-occupational fall injuries from ladders or scaffolds were studied. We registered 1402 ladder falls and 60 scaffold falls. The mean age was 50 years, and 1052 were males. The mean annual incidence rate was 1.18 per 1000 inhabitants/year for males and 0.41 per 1000 inhabitants/year for females. A rise in the annual incidence rates with increasing age were observed for both males and females, whereas no trend in the annual incidence rates for each of the ten years studied were observed. About 1/5 of the patients were hospitalized with a median number of 7 days. Two patients died following the injury. Half of the registered injuries were contusions or sprains, whereas about 1/3 were fractures or dislocations. The extremities were most commonly injured as 36% of the injuries were located to the lower extremities and 33% to the upper extremities. The forearm was most commonly fractured or dislocated, whereas the ankle joint was most commonly sprained or contused.