Asymptotic behavior of morphological filters

The connection between morphological and stack filters is used in the analysis of the statistical properties of morphological filters. Closed-form expressions for the output distributions of morphological filters are given, and their statistical symmetry properties are analyzed. Asytotically tight bounds on the expectations of two-dimensional morphological filters, and asymptotic formulas for the variances of one-dimensional morphological filters are derived. These results form the basis for analyzing general asymptotic properties of morphological filters.     

Upscaling and automation of electrophysiology: toward high throughput screening in ion channel drug discovery

Effective screening of large compound libraries in ion channel drug discovery requires the development of new electrophysiological techniques with substantially increased throughputs compared to the conventional patch clamp technique. Sophion Bioscience is aiming to meet this challenge by developing two lines of automated patch clamp products, a traditional pipette-based system called Apatchi-1, and a silicon chip-based system QPatch. The degree of automation spans from semi-automation (Apatchi-1) where a trained technician interacts with the system in a limited way, to a complete automation (QPatch 96) where the system works continuously and unattended until screening of a full compound library is completed. The performance of the systems range from medium to high throughputs.     

Modelling decision support and uncertainty for large transport infrastructure projects: The CLG-DSS model of the Øresund Fixed Link

This paper presents a decision support system, named the CLG-DSS model, which makes it possible for decision makers to assess various uncertainties in project appraisal in a systematic and explicit way. This model, a decision support system (DSS) developed within the Danish Centre for Logistics and Freight Transport (CLG) is based on cost-benefit analysis (CBA) embedded in a wider multi-criteria analysis (MCA) by the use of some principles for composite modelling assessment (COSIMA). The CLG-DSS model is set up to make use of scenario analysis (SA) and Monte Carlo simulation (MCS). A particular concern in the model is the handling of varying information across the assessment criteria and the application of SA to inform the MCS parameter setting. After the presentation of the modelling principles some ex-post case calculations for the Øresund Fixed Link are illuminating different aspects of appraisal uncertainty and thereby, at the same time, demonstrate the features of the CLG-DSS model as a useful decision support tool. It is finally concluded that appraisal of large infrastructure projects can be effectively supported by dealing with uncertainty issues in accordance with the principles described.     

Cooked and brined shrimps packed in a modified atmosphere have a shelf-life of >7 months at 0 °C, but spoil in 4–6 days at 25 °C

Summary Spoilage and safety of cooked, brined and modified atmosphere packed shrimps were studied at 0, 5, 8, 15 and 25 °C. Shrimps from two sources, cold and warm waters, were brined in a sodium–chloride brine containing benzoic, citric and sorbic acids. Shelf-life was above 7 months at 0 °C but only 4–6 days at 25 °C. Apparent activation energy for the effect of temperature on shelf-life was > 100 kJ mol^-1. This pronounced effect of temperature was explained by changes in spoilage microflora at different storage temperatures. Simple and empirical mathematical models for rates of spoilage were developed for the prediction of shelf-life at different temperatures. To evaluate safety, products were challenged with Listeria monocytogenes and spores of Clostridium botulinum . Above 5 °C growth responses of L. monocytogenes followed the square root model with a T_min-value of +0.2 °C. Cl. botulinum produced toxin at the time of spoilage at 25 °C but only in shrimps with < 3% water-phase salt.     

Heat transfer and icing of a rough cylinder

Heat transfer from a rough ice surface to air is a fundamental factor determining the icing rate and ice shape on an object under conditions where the impinging water flux exceeds the icing rate. In order to examine the effect of the roughness characteristics on icing, a boundary-layer model of heat transfer from a front half of a rough circular cylinder is proposed. The model is based on the integral equations of the boundary layer, and predicts the local heat transfer coefficient along the cylinder surface and, subsequently, the overall heat transfer rate. Comparison between the results of the model and the available experimental data for three different roughnesses in the cylinder Reynolds number range 5 × 10⁴ < Re < 4 × 10⁶ show that the model simulates the heat transfer more precisely than the previous formulations used in icing models.     

Spectral Doppler estimation utilizing 2-D spatial information and adaptive signal processing

The trade-off between temporal and spectral resolution in conventional pulsed wave (PW) Doppler may limit duplex/triplex quality and the depiction of rapid flow events. It is therefore desirable to reduce the required observation window (OW) of the Doppler signal while preserving the frequency resolution. This work investigates how the required observation time can be reduced by adaptive spectral estimation utilizing 2-D spatial information obtained by parallel receive beamforming. Four adaptive estimation techniques were investigated, the power spectral Capon (PSC) method, the amplitude and phase estimation (APES) technique, multiple signal classification (MUSIC), and a projection-based version of the Capon technique. By averaging radially and laterally, the required covariance matrix could successfully be estimated without temporal averaging. Useful PW spectra of high resolution and contrast could be generated from ensembles corresponding to those used in color flow imaging (CFI; OW = 10). For a given OW, the frequency resolution could be increased compared with the Welch approach, in cases in which the transit time was higher or comparable to the observation time. In such cases, using short or long pulses with unfocused or focused transmit, an increase in temporal resolution of up to 4 to 6 times could be obtained in in vivo examples. It was further shown that by using adaptive signal processing, velocity spectra may be generated without high-pass filtering the Doppler signal. With the proposed approach, spectra retrospectively calculated from CFI may become useful for unfocused as well as focused imaging. This application may provide new clinical information by inspection of velocity spectra simultaneously from several spatial locations.     

Druids' Knowledge in Chemical Engineering: Analysis of the Illustrated Literature by Goscinny and Uderzo

The illustrated literature series Asterix (and Obelix) is commonly known as entertainment and distraction, but behind that mask, case studies for chemical production in small medium enterprises and the crucial role of research and development can be discovered. The series rightly puts chemistry and chemical engineering at the heart of success and prosperity. Overall, the motives exemplified are of high relevance today for chemical industry.     

Framework for developing image-based dirt particle classifiers for dry pulp sheets

One important aspect of assessing the quality in pulp and papermaking is dirt particle counting and classification. Knowing the number and types of dirt particles present in pulp is useful for detecting problems in the production process as early as possible and for fixing them. Since manual quality control is a time-consuming and laborious task, the problem calls for an automated solution using machine vision techniques. However, the ground truth required to train an automated system is difficult to ascertain, since all of the dirt particles should be manually segmented and classified based on image information. This paper proposes a framework for developing and tuning dirt particle detection and classification systems. To avoid manual annotation, dry pulp sheets with a single dirt type in each were exploited to generate semisynthetic images with the ground truth information. To classify the dirt particles, a set of features were computed for each image segment. Sequential feature selection was employed to determine a close-to-optimal set of features to be used in classification. The framework was tested both with semisynthetically generated images based on real pulp sheets and with independent original real pulp sheets without any generation. The results of the experiments show that the semisynthetic procedure does not significantly change the properties of images and has little effect on the particle segmentation. The feature selection proved to be important when the number of dirt classes changes since it allows to improve the classification results. Using the standard classification methods, it is possible to obtain satisfactory results, although the methods modeling the data, such as the Bayesian classifier using the Gaussian Mixture Model, show better performance.     

Thermal modelling of the multi-stage heating system with variable boundary conditions in the wafer based precision glass moulding process

In the precision glass moulding process, the heat transfer and the resulting transient temperature distributions of the molten glass are of great importance because they significantly affect the productivity as well as the thermally induced residual stresses in the final product. Thermal modelling of the heating system in the glass moulding process considering detailed heating mechanisms therefore plays an important part in optimizing the heating system and the subsequent pressing stage in the lens manufacturing process.The current paper deals with three-dimensional transient thermal modelling of the multi-stage heating system in a wafer based glass moulding process. In order to investigate the importance of the radiation from the interior and surface of the glass, a simple finite volume code is developed to model one dimensional radiation–conduction heat transfer in the glass wafer for an extreme case with very high temperature difference considering temperature dependant thermal conductivity and heat capacity. Afterwards, by using three-dimensional FEM modelling along with a predefined experimental test, the equivalent glass–mould interface contact resistance is determined for two different pressures. Finally, the three-dimensional modelling of the multi-stage heating system in the wafer based glass moulding process is simulated with the FEM software ABAQUS for a particular industrial application for mobile phone camera lenses to obtain the temperature distribution in the glass wafer. In the numerical modelling, the interface boundary conditions for each heating stage are changed according to the determining heat transfer mechanism(s). Numerical results are compared with experimental data to show the validity of the numerical modelling. The obtained results show that the right thermal modelling is highly dependent on the proper choice of thermal boundary conditions in different stages according to the real physical phenomena behind the process.