Oxidative dehydrogenation and cracking of ethane and propane over LiDyMg mixed oxides

The oxidative dehydrogenation and cracking of ethane and propane over LiDyMg mixed oxides is reported. High yields of olefins and only moderate formation of carbon oxides was observed. Both are primary products that hardly interconvert under the reaction conditions used. Addition of chloride increases the rate of reaction, while slightly decreasing the selectivity to olefins. The addition of carbon dioxide strongly decreases the rate of reaction, the negative order of 0.5 indicating that two active Li⁺sites are blocked by the adsorption of one CO₂molecule. The reaction proceeds at low oxygen pressure primarily via elimination of dihydrogen, while at higher oxygen partial pressure the hydrogen elimination occurs via water formation. It is speculated that dehydrogenation and cracking involve Li⁺and a rather nucleophilic oxygen site.     

Determination the efficiency of open mixing screws

Our goal is the determination of the material flow processes around the mixing screws and introducing a new mixing index which can characterize the perform     

Corrosion Resistance of Steel of the Frames of Boom Sprayers

Materials Science - We perform the comparative analysis of the corrosion resistance of St3ps steel in demineralized water and in saturated solutions of the Nurelle-D insecticide and UN-32 complex...     

Decoherence dynamics estimation for superconducting gate-model quantum computers

Quantum Information Processing - In this note, I attempt to explore the quantum Colonel Blotto game and contrast it with the classical Colonel Blotto game; in particular, I will focus on an...     

Effect of initial powder type on the hydrogen storage properties of high-pressure torsion consolidated Mg

While severe plastic deformation (SPD) on bulk samples has been widely applied for modifying the H-sorption properties, there has been little attention towards the use of SPD on powder materials. In this context, the aim of the present work was to compare the H-storage properties of high-pressure torsion (HPT) consolidated products obtained from two distinct Mg powder precursors: atomized micro-sized and condensed ultrafine powder particles. The results showed that the nature of the initial powder precursor had a pronounced effect on the H-sorption behavior. The HPT product obtained from the condensed ultrafine powder showed faster absorption kinetics than the consolidated product obtained from the atomized powder. However, the HPT product obtained from atomized powder could absorb more hydrogen and showed faster desorption kinetics corresponding to a lower activation energy. These results are discussed by taking into account the effectiveness of the HPT process to refine the grain sizes and differences in the dispersion of fine MgO oxide particles.     

Evaluation of microalgae-based biorefinery alternatives

Microalgae-based biorefineries for the production of renewable biofuels like biodiesel, upgraded bio-oil, biochar, biogas and other high-value chemicals have received great attention in recent decades as potential major sources of energy for the future. Microalgae are a suitable species to produce biodiesel and other high energy density by-products; however, it is questionable whether a net energy gain can be realized or not considering the whole processing chain. In the present study, the energy balances of different algae-based biofuel and bioenergy production technologies are investigated in detail and compared to each other corresponding to a cradle-to-grave overall energetic analysis. The study includes cultivation, harvesting, cell pretreatments (cell disruption, drying, grinding), lipid extraction, transesterification, gasification and hydrothermal liquefaction with bio-oil stabilization and hydroprocessing. The energy consumption and energy gain are estimated for each operational step to determine the net energy ratio (NER, energy output over energy input) for the overall technologies studied. Our detailed investigation enables to detect the most energy consuming unit operation, that is, the bottleneck point(s) of the microalgae-based technologies which should be still improved in the future for the sake of more efficient algae-based biorefineries. The investigation makes also possible to evaluate and compare the different large scale alternatives for biomass transformation. Positive energy balances with a NER value of 1.109 and 1.137 are found in two already existing processes: open raceway ponds and closed photobioreactors, respectively. Our work gives also a detailed algorithm that can be followed at the evaluation of other microalgae-based biorefineries.     

Field Testing of Stabilized Soil

Remediation of a Superfund site in Stratford, Conn., involved stabilization of the subgrade with portland cement. Part of the remediation site was to be used as a parking area. The stabilized soil was to be covered with natural base∕subbase course materials and capped with an asphalt concrete cover. During the course of the remediation, a base-course layer could not be placed prior to the onset of winter. A field study was conducted to quantify any changes in the mechanical properties of the open stabilized subgrade subjected to freeze-thaw cycling during the winter of 1996–97. Field evaluation was conducted with pavement industry tools: the Clegg impact hammer and the dynamic cone penetrometer. Evaluation results show the viability of the Clegg hammer as an instrument for quality assurance and also show that there can be up to 50% loss in compressive strength of the subgrade within the uppermost layer of the material caused by freeze-thaw cycling.     

Growth of nanocomposite in eutectic Cu-Ag films

Eutectic composition Cu-Ag alloy thin films were prepared by co-deposition at room temperature onto oxidized Si substrates by thermal evaporation. Morphological development, structure and phase state of the films were investigated by transmission electron microscopy. The films possess fibre morphology 10-30 nm in diameter and strong <111> texture is present. The fibres are nanocrystalline composed of 2-3 nm size zones of Cu and Ag rich solid solution phases and a model for morphological development and phase separation is described. In the early stages of growth phase separation occurs by nucleation in melted islands and a eutectic of randomly oriented crystallites forms. In later stages of growth the phase separation takes place by spinodal decomposition. It results in a strain stabilized unique morphology corresponding to an intermediate stage of phase separation.     

Hydrogeological and geothermal changes in karstic reservoirs due to mine dewatering

Lowering of the piezometric-head due to pumping to protect mines from water-inrushes can create an extensive cone of depression. As a result of this, the directions of ground water flow in the surrounding aquifers can be changed, which can be sensitively indicated by the changes in water-temperature. In the bauxite deposits of Hungary the regular temperature measurements in the piezometric boreholes and observation wells, makes it possible to monitor, in combination with other methods, the hydrological structure of the surrounding rock mass.