Microstructure Formation in AlSi7Mg Alloys Directionally Solidified in a Rotating Magnetic Field

To produce high stressed automotive components like engine frames and cylinder heads in foundry industry often AlSi7Mg alloys are used. During mould filling and casting melt flow affects the development of the microstructure, which defines the mechanical properties. In this paper the microstructure formation in AlSi7Mg0.3 and AlSi7Mg0.6 alloys during directional solidification is investigated. To induce a forced melt flow a rotating magnetic field is applied. For that purpose a Bridgman‐type gradient furnace is equipped with a rotary ring magnet. For detailed investigation of the shape of the solid‐liquid interface and the primary dendrite spacing a decanting device is used. As a result, the forced melt flow substantially changes the dendritic solidification microstructure. The rotating magnetic field generates a radial secondary flow in and ahead of the mushy zone, which causes an enrichment of eutectics in the centre of the samples. At lower solidification velocities this locally leads to the transition to mixed columnar‐equiaxed or even to equiaxed growth. In that case the solid‐liquid interfaces of the decanted samples show a significant depression in the centre part. In the out‐of‐centre region columnar growth still exists and the primary dendrite spacing decreases with increasing melt flow.     

State stabilization for gate-model quantum computers

Quantum Information Processing - Historically, the information efficiency of the secret key in quantum key distribution (QKD) schemes based on binary signal formats was limited to 1 bit/particle....     

Approximation Bounds for Minimum Information Loss Microaggregation

The NP-hard microaggregation problem seeks a partition of data points into groups of minimum specified size k, so as to minimize the sum of the squared euclidean distances of every point to its group's centroid. One recent heuristic provides an O(k³) guarantee for this objective function and an O(k²) guarantee for a version of the problem that seeks to minimize the sum of the distances of the points to its group's centroid. This paper establishes approximation bounds for another microaggregation heuristic, providing better approximation guarantees of O(k²) for the squared distance measure and O(k) for the distance measure.     

Ultrasonic evaluation of geometrical and surface parameters of rough defects in solids

Ultrasonic measurements from rough cracks were carried out using both broad-band and narrow-band methods. An analysis is suggested to determine parameters of the crack quantitatively such as size, shape, rms surface roughness, and distribution function of the surface roughness. Ultrasonic measurements of the parameters compare very well with the actual parameters of the defect.     

Evaluation of mycotoxin-contaminated cereals for their use in animal feeds in Hungary

In the period between December 5, 1991 and September 17, 1998, 760 maize, 367 wheat, 119 soybean, 222 barley, 85 bran, 32 triticale, 60 oat, 14 rye and 22 sunflower samples were investigated for the presence and concentration of seven fusariotoxins (T-2 toxin, zearalenone, deoxynivalenol, nivalenol, diacetoxyscirpenol, HT-2 toxin, fusarenone-X) and OTA. The comparison of analytical data with those of the relevant literature revealed that although the incidence rate and/ or concentration of Fusarium mycotoxins and OTA in Hungarian-grown cereals is occasionally considerable, the position of the country is not worse than the average of countries. Our findings indicate that soybean tends to be good substrate for trichothecene-producing fungi and the rate of contamination is regarded as substantial. The commodities were assorted into one of three quality categories. The proportion of objectionable samples was only 3.0, 2.2, 2.3 and 1.7% in maize, wheat, barley and soybean samples, respectively. However, this low rate of objection might still be a source of great economic loss. The proportion of objectionable samples was much higher in the case of bran, oat and triticale (7.1, 6.7, and 6.3%, respectively). The results of the present investigation indicate a need for regular screening for mycotoxins of importance and individual appraisal of each commodity from the point of their use in animal feeds.     

Determination the efficiency of open mixing screws

Our goal is the determination of the material flow processes around the mixing screws and introducing a new mixing index which can characterize the perform     

Decoherence dynamics estimation for superconducting gate-model quantum computers

Quantum Information Processing - In this note, I attempt to explore the quantum Colonel Blotto game and contrast it with the classical Colonel Blotto game; in particular, I will focus on an...     

Evaluation of microalgae-based biorefinery alternatives

Microalgae-based biorefineries for the production of renewable biofuels like biodiesel, upgraded bio-oil, biochar, biogas and other high-value chemicals have received great attention in recent decades as potential major sources of energy for the future. Microalgae are a suitable species to produce biodiesel and other high energy density by-products; however, it is questionable whether a net energy gain can be realized or not considering the whole processing chain. In the present study, the energy balances of different algae-based biofuel and bioenergy production technologies are investigated in detail and compared to each other corresponding to a cradle-to-grave overall energetic analysis. The study includes cultivation, harvesting, cell pretreatments (cell disruption, drying, grinding), lipid extraction, transesterification, gasification and hydrothermal liquefaction with bio-oil stabilization and hydroprocessing. The energy consumption and energy gain are estimated for each operational step to determine the net energy ratio (NER, energy output over energy input) for the overall technologies studied. Our detailed investigation enables to detect the most energy consuming unit operation, that is, the bottleneck point(s) of the microalgae-based technologies which should be still improved in the future for the sake of more efficient algae-based biorefineries. The investigation makes also possible to evaluate and compare the different large scale alternatives for biomass transformation. Positive energy balances with a NER value of 1.109 and 1.137 are found in two already existing processes: open raceway ponds and closed photobioreactors, respectively. Our work gives also a detailed algorithm that can be followed at the evaluation of other microalgae-based biorefineries.