The value of the biomarkers cathelicidin,milk amyloid A,and haptoglobin to diagnose and classify clinical and subclinical mastitis

Timely and objective diagnosis and classification of mastitis is crucial to ensure adequate management and therapeutic decisions. Analyzing specific biomarkers in milk could be advantageous compared with subjective or semiquantitative criteria, such as palpation of the udder in clinical mastitis cases or evaluation of somatic cell count using cow side tests (e.g., California Mastitis Test) in subclinical mastitis quarters. The objective of this study was to investigate the diagnostic value of 3 biomarkers; cathelicidin, milk amyloid A, and haptoglobin for the diagnosis of subclinical and clinical mastitis. Furthermore, the suitability of these biomarkers to differentiate between mild, moderate, and severe clinical mastitis and the influence of different pathogens on biomarker levels was tested. A total of 67 healthy cows, 119 cows with subclinical mastitis, and 212 cows with clinical mastitis were enrolled in the study. Although cathelicidin, haptoglobin, and milk amyloid A were measured in all samples from healthy cows and those with subclinical mastitis, haptoglobin, and cathelicidin results were only available from 121 out of 212 cows with clinical mastitis. Milk amyloid A was measured in all samples. In cows with clinical mastitis, the mastitic quarter and a second healthy quarter serving as a healthy in-cow control quarter were sampled. It was possible to differentiate between healthy quarters, quarters with subclinical mastitis, and quarters with clinical mastitis using all 3 biomarkers. Concerning cathelicidin, thresholds were 0.000 [sensitivity (Se) = 0.83, specificity (Sp) = 0.97] and 0.053 (Se = 0.98, Sp = 0.99) for normalized optical density at 450 nm (NOD450) for differentiating between healthy quarters and quarters with subclinical or clinical mastitis, respectively. Thresholds of 1.28 µg/mL (Se = 0.65, Sp = 0.76) and 1.81 µg/mL (Se = 0.77, Sp = 0.83) for milk amyloid A and 3.65 µg/mL (Se = 0.92, Sp = 0.94) and 5.40 µg/mL mL (Se = 0.96, Sp = 0.99) for haptoglobin were calculated, respectively. Healthy in-cow control quarters from cows with CM showed elevated milk amyloid A and haptoglobin levels compared with healthy quarters from healthy cows. Only the level of milk amyloid A was higher in severe clinical mastitis cases compared with mild ones. In contrast to clinical mastitis, cathelicidin and haptoglobin in subclinical mastitis quarters were significantly influenced by different bacteriological results. The measurement of cathelicidin, milk amyloid A, and haptoglobin in milk proved to be a reliable method to detect quarters with subclinical or clinical mastitis.     

Cyclosporin A and cyclosporin SDZ PSC 833 enhance anti-CD5 ricin A-chain immunotoxins in human leukemic T cells

Recent studies have shown that cyclosporin A (CsA) may affect ricin A-chain immunotoxin (RTA-IT) therapy. In this study, we evaluated the ability of CsA and its nonimmunosuppressive analog, SDZ PSC 833, to enhance anti-CD5 T101 RTA-ITs in vitro. Both 4 mumol/L CsA and 4 mumol/L SDZ PSC 833 significantly and specifically enhanced the cytotoxic activity of T101 RTA-IT on the human lymphoblastic T-cell line, CEM III (101-fold and 105-fold, respectively). Furthermore, these Cs also enhanced the cytotoxicity of the more potent T101 F(ab')2 RTA-IT (ninefold and eightfold, respectively). The effect of human plasma, originating from four patients enrolled in a phase I high-dose CsA regimen, was examined on T101 RTA-IT cytotoxicity on CEM III cells. In each case, with plasma CsA levels between 3,090 and 4,860 ng/mL (2.5 to 4 mumol/L), a significant increase in T101 RTA-IT-mediated cytotoxicity was observed ranging from 31% to 60%. Neither CsA nor SDZ PSC 833 affected the rate of RTA-IT binding, internalization, intracellular trafficking, or degradation. Analysis of internalized T101 RTA-IT molecules showed that these were essentially intact, which suggests that these enhancers may act only on a small population of RTA-ITs that escapes present investigational techniques. In conclusion, because the concentrations used are clinically achievable, Cs appear to be promising agents for in vivo enhancement of RTA-ITs.     

Expression of myotonic dystrophy protein kinase gene during in vivo and in vitro mouse myogenesis

Myotonic dystrophy (DM) is an autosomal dominant neuromuscular disorder characterized by a great variability in its clinical manifestations. The mutational basis underlying DM consists of an unstable (CTG)n trinucleotide repeat in the 3' untranslated region of the myotonic dystrophy protein kinase gene (DMPK). Conflicting results on DMPK gene expression in congenitally affected infants (CDM) have been published. Moreover, the prominence of satellite cells seen in muscle of CDM infants supports the notion that the congenital form is associated with an arrest in muscle development and suggests a role for the DMPK gene during differentiation and maturation of muscle. In order to clarify these findings, a comparative study of DMPK and myogenic factor mRNA levels was performed in developing mouse muscle tissues and cultured muscle cells at different developmental stages. Results show that DMPK gene expression is upregulated at a late stage of muscular development. This upregulation does not seem to depend on a given muscle specific bHLH factor.     

Structural evolution at short and medium range distances during crystallization of a P2O5-Li2O-Al2O3-SiO2 glass

Li₂O-Al₂O₃-SiO₂ (LAS) glass-ceramics have important industrial applications and bulk nucleation is usually achieved by using nucleating agents. In particular, P₂O₅ is an efficient agent in glasses containing a low level of Al₂O₃ but its role in the first stages of nucleation is not well established. In this study, we combine structural investigations from local to mesoscales to describe the structural evolution during crystallization of LAS glass-ceramics. Local environment is probed using ²⁹Si and ³¹P MAS-NMR, indicating organization of P in poorly crystallized Li₃PO₄ species prior to any crystallization. To better understand the detailed nanoscale changes of the glass structure, ³¹P-³¹P DQ-DRENAR homonuclear correlation experiments have been carried out, revealing the gradual segregation of P atoms associated with the formation of disordered Li₃PO₄. Small-angle neutron scattering data also show the apparition of nanoscale heterogeneities associated with Li₃PO₄ species upon heating treatments and allow the determination of their average sizes. These new structural information enhance our understanding of the role of P in nucleation mechanisms. Nucleation is initiated by gradual change in P environment implying P segregation upon heating treatments, forming disordered Li₃PO₄ heterogeneities. The segregation of P atoms enables the precipitation of meta- and disilicate phases.     

Sequential vapor sorption of additional penetrants in preswollen polymers

Uptake and removal of a second penetrant in polymer samples preexposed to another vapor dictate many industrially important processes. Both the kinetics and equilibrium sorption can be strongly affected by the presence of the first permeant in the polymeric matrices. A novel experimental setup was constructed to study penetrant uptake in sequence. Sorption of the second vapor took place while the partial vapor pressure of the first vapor was maintained, so that diffusion into the preswollen polymer approximated transport in a pseudobinary system. Polybutylene was chosen in this work to illustrate the capability of this versatile experimental system. Both the rate of diffusion and equilibrium sorption of the second vapor were found to depend on the prevailing composition of the preswollen polymer for all penetrant pairs studied.     

Methane calibration burner and C‐factor determination with cone calorimeter – validation of the standardized calibration protocol

The cone calorimeter is one of the major fire tests. In its reference standard ISO 5660‐1, the apparatus (and especially a characteristic of its orifice plate mass flow meter, called C‐Factor) is calibrated using a methane burner set at 5 kW. However, measurements performed in end‐use are in the range 1–10 kW. In addition, standard proposes to check linearity at 1 and 3 kW, which means in the lowest part of the range. This communication establishes the validation of the linearity on the whole range and determines the optimal condition for C‐factor determination. It justifies the technical choices of the standard. Copyright © 2014 John Wiley & Sons, Ltd.     

Microcellular foaming of poly(lactic acid) branched with food-grade chain extenders

This study evaluated the effectiveness and efficiency of two food-grade multifunctional epoxies chain extenders (CE) in branching PLA and improving its foamability. Both CE grades were effective in branching PLA causing increased end mixing torque, shear, elongational viscosities, molecular weight but decreased crystallinity of poly(lactic acid) (PLA) with CE content, due to chain entanglements. CE with low epoxy equivalent weight (EEW) was more efficient than the counterpart with high EEW due to its high reactivity. Neat PLA foams showed poor cell morphology with areas without nucleated cells and had a low expansion, owing to its low elongational viscosity. By contrast, there was a considerable change in the morphology of the PLA foam structure caused by its branching. Chain-extended PLA foams had uniform cell morphology with a high void fraction (up to ~85%) and expansion ratio (an eightfold expansion over unfoamed PLA) due to their high elongational viscosities, suggesting that melt properties of branched PLA were appropriate for optimum cell growth and stabilization during foaming. Overall, CE with low EEW was the most effective grade and 0.25% the optimum content that provided appropriate melt viscosity to produce PLA foams with a homogeneous structure, fine cells, high void fraction, high volume expansion ratio, and cell-population density.     

The Esterase PfeE,the Achilles’ Heel in the Battle for Iron between Pseudomonas aeruginosa and Escherichia coli

Bacteria access iron, a key nutrient, by producing siderophores or using siderophores produced by other microorganisms. The pathogen Pseudomonas aeruginosa produces two siderophores but is also able to pirate enterobactin (ENT), the siderophore produced by Escherichia coli. ENT-Fe complexes are imported across the outer membrane of P. aeruginosa by the two outer membrane transporters PfeA and PirA. Iron is released from ENT in the P. aeruginosa periplasm by hydrolysis of ENT by the esterase PfeE. We show here that pfeE gene deletion renders P. aeruginosa unable to grow in the presence of ENT because it is unable to access iron via this siderophore. Two-species co-cultures under iron-restricted conditions show that P. aeruginosa strongly represses the growth of E. coli as long it is able to produce its own siderophores. Both strains are present in similar proportions in the culture as long as the siderophore-deficient P. aeruginosa strain is able to use ENT produced by E. coli to access iron. If pfeE is deleted, E. coli has the upper hand in the culture and P. aeruginosa growth is repressed. Overall, these data show that PfeE is the Achilles’ heel of P. aeruginosa in communities with bacteria producing ENT.