Ka and Q band propagation experiments in Toulouse using ASTRA 3B and ALPHASAT satellites

From January 2008 to March 2011, ONERA operated in Toulouse, France, a beacon receiver able to collect the 19.7‐GHz beacon signal of the HotBird 6 satellite. In March 2011, the radio frequency chain was modified to be able to receive the 20.2‐GHz ASTRA 3B beacon to benefit from a higher Equivalent Isotropically Radiated Power of the satellite. Since June 2015, a second beacon receiver has been installed and is able to record the 39.4‐GHz beacon signal of the Alphasat satellite. The objective of this paper is to present the results of the first 2 years of measurements (June 2015 to May 2017) of the Q‐band Alphasat propagation experiment in Toulouse, as well as concurrent measurements collected at Ka‐band with ASTRA 3B. First of all, the propagation experiments are briefly described. Second, the results of the statistical analysis are highlighted. Finally, a deep analysis of the performances of the 2 frequency scaling prediction methods recommended in ITU‐R P.618‐13 is performed.     

Effect of constrained fast power control on cellular DS-CDMAsystems with base station diversity

An approach is presented for determining the effect of limiting the power transmitted by a mobile user in a cellular DS-CDMA system with fast power control under multipath fading. It is shown that the system capacity can be increased if very deep fades are not compensated     

Fluid analysis of a TCP connection over ABR

This paper reports on an analytical study of the performances of the ATM‐ABR service category in transporting TCP/IP flows over an ATM network. We explore the behavior of a TCP connection over an ATM‐ABR VC, in presence of exogenous non‐controlled traffic. This fluid analysis of the system allows the study of the interaction between the window‐based end‐to‐end flow control TCP protocol and the rate‐based flow control ABR mechanism, which is restricted to the ATM part of the network. The main aim of this study is to give performance evaluation formulae to model the behavior of such a TCP over ABR connection. This revised version was published online in June 2006 with corrections to the Cover Date.     

Interfacial Strain Gradients Control Nanoscale Domain Morphology in Epitaxial BiFeO3 Multiferroic Films

Domain switching pathways fundamentally control performance in ferroelectric thin film devices. In epitaxial bismuth ferrite (BiFeO₃) films, the domain morphology is known to influence the multiferroic orders. While both striped and mosaic domains have been observed, the origins of the latter have remained unclear. Here, it is shown that domain morphology is defined by the strain profile across the film–substrate interface. In samples with mosaic domains, X‐ray diffraction analysis reveals strong strain gradients, while geometric phase analysis using scanning transmission electron microscopy finds that within 5 nm of the film–substrate interface, the out‐of‐plane strain shows an anomalous dip while the in‐plane strain is constant. Conversely, if uniform strain is maintained across the interface with zero strain gradient, striped domains are formed. Critically, an ex situ thermal treatment, which eliminates the interfacial strain gradient, converts the domains from mosaic to striped. The antiferromagnetic state of the BiFeO₃ is also influenced by the domain structure, whereby the mosaic domains disrupt the long‐range spin cycloid. This work demonstrates that atomic scale tuning of interfacial strain gradients is a powerful route to manipulate the global multiferroic orders in epitaxial films.     

A Cross-Layer Approach to Enhance QoS for Multimedia Applications Over Satellite

The need for on-demand QoS support for communications over satellite is of primary importance for distributed multimedia applications. This is particularly true for the return link which is often a bottleneck due to the large set of end-users accessing a very limited uplink resource. Facing this need, Demand Assignment Multiple Access (DAMA) is a classical technique that allows satellite operators to offer various types of services, while managing the resources of the satellite system efficiently. Tackling the quality degradation and delay accumulation issues that can result from the use of these techniques, this paper proposes an instantiation of the Application Layer Framing (ALF) approach, using a cross-layer interpreter (xQoS-Interpreter). The information provided by this interpreter is used to manage the resource provided to a terminal by the satellite system in order to improve the quality of multimedia presentations from the end user’s point of view. Several experiments are carried out for different loads on the return link. Their impact on QoS is measured through different application as well as network level metrics.

Improving mobile ad hoc network routing with satellite out‐of‐band signaling

Routing in mobile ad hoc networks is a complex task due to the mobility of the nodes and the constraints linked to a wireless multihop network (e.g., limited bandwidth, collisions, and bit errors). These adverse conditions impair not only data traffic but also routing signaling traffic, which feeds route computation. In this contribution, we propose to use satellite communications to help in the distribution of mobile ad hoc network routing signaling. The optimized link‐state routing (OLSR) is chosen among several routing protocols to be extended with satellite‐based signaling, yielding a version we call OLSR hybrid signaling (OLSR‐H). This new scheme is evaluated through simulations and yields improvements of approximately 10% in the data delivery ratio compared with a regular OLSR. This evaluation is conducted using two different network topology models, one being fit for representing forest firefighting operations. Copyright © 2013 John Wiley & Sons, Ltd.     

Smart gateways switching control algorithms based on tropospheric propagation forecasts

The use Q/V band spectrum for the feeder links of high throughput satellites and the need to cope with the significant propagation impairments at those frequencies motivate the development of smart diversity techniques. Those techniques aim at improving the availability level of the overall feeder link with a limited level of redundancy. The combinatorial gain of availability provided by those techniques can be obtained only if efficient switching methodologies are developed, performing the best trade‐off between system flexibility and channel prediction accuracy. This paper proposes various propagation forecast mechanisms for the control of switching between gateways in smart diversity, corresponding to various system assumptions in terms of required anticipation time for the triggering of the switches. The performances of those algorithms are then assessed against measured attenuation and meteorological data. It enables to evaluate the performance degradation regarding an idealized case.     

Wireless-Control Strategy for Parallel Operation of Distributed-Generation Inverters

In this paper, a method for the parallel operation of inverters in an ac-distributed system is proposed. This paper explores the control of active and reactive power flow through the analysis of the output impedance of the inverters and its impact on the power sharing. As a result, adaptive virtual output impedance is proposed in order to achieve a proper reactive power sharing, regardless of the line-impedance unbalances. A soft-start operation is also included, avoiding the initial current peak, which results in a seamless hot-swap operation. Active power sharing is achieved by adjusting the frequency in load transient situations only, owing to which the proposed method obtains a constant steady-state frequency and amplitude. As opposed to the conventional droop method, the transient response can be modified by acting on the main control parameters. Linear and nonlinear loads can be properly shared due to the addition of a current harmonic loop in the control strategy. Experimental results are presented from a two-6-kVA parallel-connected inverter system, showing the feasibility of the proposed approach     

Nido-Hydroborate-Based Electrolytes for All-Solid-State Lithium Batteries

Hydroborate-based solid electrolytes have recently been successfully employed in high voltage, room temperature all-solid-state sodium batteries. The transfer to analogous lithium systems has failed up to now due to the lower conductivity of the corresponding lithium compounds and their high cost. Here LiB₁₁H₁₄ nido-hydroborate as a cost-effective building block and its high-purity synthesis is introduced. The crystal structures of anhydrous LiB₁₁H₁₄ as well as of LiB₁₁H₁₄-based mixed-anion solid electrolytes are solved and high ionic conductivities of 1.1 × 10⁻⁴ S cm⁻¹ for Li₂(B₁₁H₁₄)(CB₁₁H₁₂) and 1.1 × 10⁻³ S cm⁻¹ for Li₃(B₁₁H₁₄)(CB₉H₁₀)₂ are obtained, respectively. LiB₁₁H₁₄ exhibits an oxidative stability limit of 2.6 V versus Li⁺/Li and the proposed decomposition products are discussed based on density functional theory calculations. Strategies are discussed to improve the stability of these compounds by modifying the chemical structure of the nido-hydroborate cage. Galvanostatic cycling in symmetric cells with two lithium metal electrodes shows a small overpotential increase from 22.5 to 30 mV after 620 h (up to 0.5 mAh cm⁻²), demonstrating that the electrolyte is compatible with metallic anodes. Finally, the Li₂(B₁₁H₁₄)(CB₁₁H₁₂)  electrolyte is employed in a proof-of-concept half cell with a TiS₂ cathode with a capacity retention of 82% after 150 cycles at C/5.