Electrical contact resistance between stainless steel bipolar plate and carbon felt in PEFC: A comprehensive study

Bipolar plate represents a key component of Proton Exchange Membrane Fuel Cell (PEFC) with several essential functions, among them the electric connection of elementary cells. Usually made of graphite, this component is studied worldwide in order to develop a commercially viable alternative: different ways have been being investigated, and to date, despite corrosion issues, stainless steel (SS) appears as a good candidate material, but its Electrical Contact Resistance (ECR) can reach unacceptable values when exposed to PEFC environment. This paper offers a comprehensive study of the parameters acting on ECR when using uncoated SS in PEFC: roughness, which influences the surface contact area with carbon baking, bulk composition of the alloy, which influences only partly the nature of passive films, and the composition and structure of passive films, strongly modified by surface treatments and ageing conditions.     

Timed verification of the generic architecture of a memory circuit using parametric timed automata

Using a variant of Clariso-Cortadella’s parametric method for verifying asynchronous circuits, we analyse some crucial timing behaviors of the architecture of SPSMALL memory, a commercial product of STMicroelectronics. Using the model of parametric timed automata and model checker HYTECH, we formally derive a set of linear constraints that ensure the correctness of the response times of the memory. We are also able to infer the constraints characterizing the optimal setup timings of input signals. We have checked, for two different implementations of this architecture, that the values given by our model match remarkably with the values obtained by the designer through electrical simulation. Partially supported by project MEDEA+ Blueberries. A preliminary version appeared in the Proceedings of 4th International Conference on Formal Modelling and Analysis of Timed Systems (FORMATS’06), Sept. 2006.     

An orthotropic variant of the equilibrium gap method applied to the analysis of a biaxial test on a composite material

In this paper, it is proposed to apply the equilibrium gap method to orthotropic composite materials to retrieve damage laws from measured displacement fields. A finite difference implementation method is first proposed. A linear system is formed, for which the unknowns are piecewise constant orthotropic rigidities, while the measured displacements are input (known) data. In this example, a cruciform specimen is considered for biaxial test. It is shown that, by referring to FE computed displacement fields a prescribed contrast map can be identified. Corrupted artificial displacement fields obtained through non-linear simulations are also used. When considering shear damage, a procedure using estimated contrast maps to identify a damage law is validated. An experimental biaxial test on a 2.5 C/C composite is finally analysed following the proposed approach. For each unloading step, a contrast map for all moduli is obtained from full-field measurements. By assuming that the shear moduli contrasts result from a damage mechanism, one subsequently obtains damage maps, and therefore, a growth law. The results are first validated by comparing measured and FE reconstructed displacement fields, and by comparing the identified damage fields with post-processed ones.     

Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression

Entangled fibrous materials have been manufactured from different fibers: metallic fibers, glass fibers, and carbon fibers. Specimens have been produced with and without cross-links between fibers. Cross-links have been achieved using epoxy spraying. The scope of this article is to analyze the mechanical behavior of these materials and to compare it with available models. The first part of this article deals with entangled fibrous materials without cross-link between fibers. Compression tests are detailed and test reproducibility is checked. In the second part, compression tests were performed on materials manufactured with cross-linked fibers. The specific mechanical behavior obtained is discussed.     

A dynamical framework to understand performance trade-offs and interference in dual tasks.

This study demonstrated that the dynamic pattern approach may reconcile resource and outcome conflict theories to explain performance in dual tasks. Participants performed a bimanual coordination task and a reaction time task with different conditions of attentional priority. Results showed a trade-off between pattern variability and reaction time when priority was given to the coordination task. Such a trade-off was indicative of resource allocation. An analysis of perturbation in the bimanual coordination revealed interference, a reputed sign of outcome conflict. Moreover, interference diminished substantially when priority was given to the bimanual task. The coexistence of performance trade-off and outcome conflict suggests that these two phenomena are not mutually exclusive. Rather, both may follow from modifying the coupling between the limbs through attention. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Ultrafast compound imaging for 2-D motion vector estimation: application to transient elastography

This paper describes a new technique for two-dimensional (2-D) imaging of the motion vector at a very high frame rate with ultrasound. Its potential is experimentally demonstrated for transient elastography. But, beyond this application, it also could be promising for color flow and reflectivity imaging. To date, only axial displacements induced in human tissues by low-frequency vibrators were measured during transient elastography. The proposed technique allows us to follow both axial and lateral displacements during the shear wave propagation and thus should improve Young's modulus image reconstruction. The process is a combination of several ideas well-known in ultrasonic imaging: ultra-fast imaging, multisynthetic aperture beamforming, 1-D speckle tracking, and compound imaging. Classical beamforming in the transmit mode is replaced here by a single plane wave insonification increasing the frame rate by at least a factor of 128. The beamforming is achieved only in the receive mode on two independent subapertures. Comparison of successive frames by a classical 1-D speckle tracking algorithm allows estimation of displacements along two different directions linked to the subapertures beams. The variance of the estimates is finally improved by tilting the emitting plane wave at each insonification, thus allowing reception of successive decorrelated speckle patterns.     

Multiple-scattering lidar retrieval method: tests on Monte Carlo simulations and comparisons with in situ measurements

A multiple-field-of-view (MFOV) lidar measurement and solution technique has been developed to exploit the retrievable particle extinction and size information contained in the multiple-scattering contributions to aerosol lidar returns. We describe the proposed solution algorithm. The primary retrieved parameters are the extinction coefficient at the lidar wavelength and the effective particle diameter from which secondary products such as the extinction at other wavelengths and the liquid-water content (LWC) of liquid-phase clouds can be derived. The solutions are compared with true values in a series of Monte Carlo simulations and with in-cloud measurements. Good agreement is obtained for the simulations. For the field experiment, the retrieved effective droplet diameter and LWC for the available seven cases studied are on average 15% and 35% (worst case) smaller than the measured data, respectively. In the latter case, the analysis shows that the differences cannot be attributed solely to lidar inversion errors. Despite the limited penetration depth (150-300 m) of the lidar pulses, the results of the studied cases indicate that the retrieved lidar solutions remain statistically representative of measurements performed over the full cloud extent. Long-term MFOV lidar monitoring could thus become a practical and economical option for cloud statistical studies but more experimentation on more varied cloud conditions, especially for LWC, is still needed.     

From LDPE to XLPE: investigating the change of electrical properties. Part I. space charge, conduction and lifetime

This paper discusses the results of space charge, conduction current and electrical lifetime measurements performed on widely-used materials for electrical insulation, that is, low density polyethylene (LDPE) and cross-linked polyethylene (XLPE). Space charge accumulation profiles were compared in LDPE, low density polyethylene plus antioxidant (LDPE+AO) and XLPE, with consideration of thermal treatment effects in LDPE and XLPE. Significant variation (decrease) of accumulated space charge and apparent mobility, as well as slight decrease of conduction current, can be seen going from LDPE to LDPE+AO and XLPE, which may be associated with formation of deeper trap levels (or an increase of their density). On the contrary, electrical life under AC voltage does not show significant differences from LDPE to XLPE. This latter result underlines that life under high AC electrical stress is mostly determined by defects (weak points) rather than material characteristics associated with charge injection and transport.