Individual cell lag time distributions of Cronobacter (Enterobacter sakazakii) and impact of pooling samples on its detection in powdered infant formula

Cells of six strains of Cronobacter were subjected to dry stress and stored for 2.5 months at ambient temperature. The individual cell lag time distributions of recovered cells were characterized at 25 °C and 37 °C in non-selective broth. The individual cell lag times were deduced from the times taken by cultures from individual cells to reach an optical density threshold. In parallel, growth curves for each strain at high contamination levels were determined in the same growth conditions. In general, the extreme value type II distribution with a shape parameter fixed to 5 (EVIIb) was the most effective at describing the 12 observed distributions of individual cell lag times. Recently, a model for characterizing individual cell lag time distribution from population growth parameters was developed for other food-borne pathogenic bacteria such as Listeria monocytogenes. We confirmed this model’s applicability to Cronobacter by comparing the mean and the standard deviation of individual cell lag times to populational lag times observed with high initial concentration experiments. We also validated the model in realistic conditions by studying growth in powdered infant formula decimally diluted in Buffered Peptone Water, which represents the first enrichment step of the standard detection method for Cronobacter. Individual lag times and the pooling of samples significantly affect detection performances.     

Sintering and conductivity of BaCe0.9Y0.1O2.95 synthesized by the sol-gel method

Ceramic powders of BaCe_0.9Y_0.1O_2.95 (BCY10) have been prepared by the sol-gel method. Barium and yttrium acetate and cerium nitrate were used as ceramic precursors in a water solution. The reaction process studied by DTA-TG and XRD showed that calcination of the precursor powder at T ≥ 1000 °C produces a single perovskite phase. The densification behaviour of green compacts studied by constant heating rate dilatometry revealed that the shrinkage rate was maximal at 1430 °C. Sintered densities higher than 95% of the theoretical one were thus obtained below 1500 °C. The bulk and additional blocking effects were characterized by impedance spectroscopy in wet atmosphere between 150 and 600 °C. A proton conduction behaviour was clearly identified. The blocking effect can be related to a space-charge depletion layer of protons in the vicinity of grain boundaries.     

Quantification of Se-Methylselenocysteine and Its γ-Glutamyl Derivative from Naturally Se-Enriched Green Bean (Phaseolus vulgaris vulgaris) After HPLC-ESI-TOF-MS and Orbitrap MS n -Based Identification

Orthogonal liquid chromatographic (ion exchange, reversed phase, and ion pairing) and mass spectrometric [electrospray ionization (ESI)-TOF-MS, ESI-Orbitrap MS, and inductively coupled plasma mass spectrometry (ICP-MS)] methods were addressed to identify and quantify selenium species from a naturally Se-enriched green bean (Phaseolus vulgaris vulgaris) sample after proteolytic digestion. While selenomethionine (10.1 mg/kg as Se) and selenate (9.5 mg/kg as Se) could be quantified in a straightforward way by anion exchange LC-ICP-MS technique, a multistep purification protocol was required to identify Se-methylselenocysteine and γ-glutamyl-Se-methylselenocysteine in an unambiguous way prior to quantification by using either in-source fragmentation (LC-ESI-TOF-MS) or collision-induced dissociation (LC-ESI-Orbitrap MS). Finally, Se-methylselenocysteine (2.6 mg/kg as Se) and γ-glutamyl-Se-methylselenocysteine (1.2 mg/kg as Se) could contribute to the overall selenium recovery of 72 %. This sample is the first of the Faboideae subfamily and Phaseolus ssp. to be speciated to such an extent for selenium including γ-glutamyl-Se-methylselenocysteine, a highly potential selenium species, which makes this bean material an ideal candidate for functional food purposes.     

用于加氢反应的催化剂及其制备

正本发明涉及到含有载体的催化剂,载体包括至少一种粘结剂和至少一种沸石以及至少一系列通道,由含12个氧原子限定的通道是开放的,所说催化剂包含磷,至少一种C1~C4二烷基丁二酸酯,醋酸和氢化-脱氢功能团,官能团含有至少一个族ⅥB元素和至少一个族Ⅷ元素。     

Experimental investigation of solid particles flow in a conical spouted bed using radioactive particle tracking

Solid particles flow in a conical spouted bed is characterized by radioactive particle tracking. The influence of operating conditions on key parameters of this flow is evaluated and discussed: the morphology of the solid bed is not strongly influenced by the forces exerted by the gas on the solid particles, but rather by geometrical considerations; the particles spend approximately 8% of their time in the spout in all experiments; it is the force exerted on the solid particles by the gas that directly controls the volumetric flow rate between adjacent regions, and not the amount of particles in the bed; as U/U_ms increases, the volume of solid particles in the annulus decreases, the volume of solid particles in the fountain increases and the volume of solid particles in the spout remains constant. Correlations to predict key flow parameters as functions of operating conditions are also established and discussed. © 2015 American Institute of Chemical Engineers AIChE J, 62: 26–37, 2016     

Parameters governing strain induced crystallization in filled natural rubber

A series of in situ synchrotron X-ray diffraction experiments are performed during the stretching of weakly and highly vulcanized carbon black (CB), silica and grafted silica filled natural rubber sample (NR). Conversely to literature, Mullins effect observed after one stretching cycle modifies the strain induced crystallization (SIC) behaviour of the sample. The onset of crystallization is ruled by the strain amplification induced by the filler presence. Moreover, fillers (CB and silica) behave as additional crosslinks into NR network, through filler-rubber interactions that either accelerate or slow down the crystallization rate depending on NR matrix chemical crosslink density. This is consistent with the assumption that effective network density, which is due to chemical crosslinks, entanglements, and filler-rubber interactions, controls the crystallization rate.     

Geochemical changes in sulfidic mine tailings stored under a shallow water cover

The objective of this study was to assess the effectiveness of an engineered shallow water cover in reducing the oxidation of sulfidic mine tailings and thus preventing the development of acid rock drainage. Fresh tailings were submerged under a 0.3-m water cover in experimental field cells. From 1996 to 1998, we followed the chemistry of the interstitial water near the tailings-overlying water interface using in situ dialysis, and determined pH and dissolved oxygen (DO) profiles across the tailing water interface using micro-electrodes. Penetration of DO into the tailings was limited to <7 mm, even in the presence of DO produced by benthic periphyton. Anoxia in the tailings was further demonstrated by the appearance of dissolved sigmaH2S, Fe and Mn in pore water at depths -1.5 cm below the interface. However, there was clear evidence of surface oxidation of the mine tailings at the mm scale (i.e., DO depletion, coupled with localized increases in [H+] and [SO4(2-)]). Mobilization of Cd and Zn from this surface layer was indicated by the presence of sub-surface peaks in the concentrations of these two metals in the tailings interstitial water and by a change in their solid phase partitioning from refractory to more labile fractions. In contrast, mobilization of Cu from tailings was less evident. Unlike previous reports, which suggested that submerged tailings were effectively inert, our results show alteration of the superficial layer over time.     

“平面的科学性”:住宅建筑及其相关(1860-1930年)

通过研究英国现代住宅在19世纪下半叶以来的平面科学,本文展现出全景式的视角来认知当时的建筑师将住宅科学化的思想是如何成形的,并且认知相关的英国理论是如何与同时代的德国及法国理论发生关联的.从现代住宅的平面科学性出发,19世纪末至20世纪初年建筑理论中关于住宅特征与民族国家性的关系得到了在民族学、人类学、艺术史等学科视角之下的讨论.     

Electrical contact resistance between stainless steel bipolar plate and carbon felt in PEFC: A comprehensive study

Bipolar plate represents a key component of Proton Exchange Membrane Fuel Cell (PEFC) with several essential functions, among them the electric connection of elementary cells. Usually made of graphite, this component is studied worldwide in order to develop a commercially viable alternative: different ways have been being investigated, and to date, despite corrosion issues, stainless steel (SS) appears as a good candidate material, but its Electrical Contact Resistance (ECR) can reach unacceptable values when exposed to PEFC environment. This paper offers a comprehensive study of the parameters acting on ECR when using uncoated SS in PEFC: roughness, which influences the surface contact area with carbon baking, bulk composition of the alloy, which influences only partly the nature of passive films, and the composition and structure of passive films, strongly modified by surface treatments and ageing conditions.