Using the high pressure methane isotherm for determination of pore size distribution of carbon adsorbents

A method of determining pore size distribution, PSD, of carbon adsorbents based on the high pressure methane isotherm is presented. A generic software package, and an IBM compatible PC, have been used to search for a PSD in the form of a histogram. The method relies on a known local isotherm, in this case, assuming a simplified model of infinite slit shaped carbon pores.Three carbons, having very different pore structures: BPL, PX-21, and PVDC, were analyzed using the new method and the results compared with those obtained from subcritical Ar, and N₂ isotherms. The analysis from the high pressure methane isotherm gave results which are different than those from the low pressure low temperature isotherms but not significantly enough to be unrealistic.     

Mathematical and Scientific Foundations for an Integrative Engineering Curriculum

All fields of engineering, whether chemical, civil, electrical, materials, mechanical, etc., encompass a common body of essential mathematics and science. In the freshman year of Drexels E⁴ program, this common mathematical and scientific foundation is cultivated in the Mathematical and Scientific Foundations of Engineering I, II and III (MSFE I, MSFE II, MSFE III). In an integrated fashion, MSFE I presents the essential calculus, physics and engineering mechanics vital to the freshman engineering student. In the first two quarters, MSFE II presents chemistry with clearly defined engineering applications and significance: in the third quarter, MSFE II presents living systems with the same thrust. Also in the third quarter, MSFE III presents basic circuits and circuit elements, and a brief introduction to electromagnetic theory.     

The application of ionizing radiation in reversible addition-fragmentation chain transfer (RAFT) polymerization: Renaissance of a key synthetic and kinetic tool

Ionizing radiation, such as γ, ultraviolet, microwave and X-ray radiation, has long been used in polymer chemistry as a means of initiating polymerization, crosslinking gels and decomposing particular polymer components. More recently, ionizing radiation has found application in tandem with living radical polymerization to form novel polymeric materials with defined molecular weight and narrow molecular weight distribution. In particular, γ-rays and ultraviolet light both have shown promise as sources of initiation in reversible addition-fragmentation chain transfer (RAFT) polymerization. The ability to apply these sources of initiation at low temperatures is useful in applications where elevated temperature is likely to be detrimental to the system, for instance, in preparing protein-polymer conjugates. Similarly, the use of these initiating sources at low temperature is particularly suitable for some monomers, such as allyl compounds, which have not been synthesized using any other living radical approach. The current review examines the development of ionizing radiation as a tool in RAFT polymerization, with particular reference to the elucidation of the polymerization mechanism, the synthesis of high functionality polymers and probing the kinetic parameters of the RAFT process.     

Cracking and the Indentation Size Effect for Knoop Hardness of Glasses

The Knoop hardnesses of five glasses decreased with increasing load in accordance with the classic indentation size effect (ISE). At moderate loads, cracking dramatically altered the indentation sizes and the ISE trends in three of the five glasses. Cracked indentations were as much as 10 μm longer than uncracked indentations made under identical conditions. Diagonal length readings must be corrected for optical resolution limitations if low power lenses are used.     

Depletion of Grain-Boundary Phase and Elastic Creep Deformation Upon Ultra-Long Flexural Stress Rupture Experiments of NC-132 Silicon Nitride

A unique grain-boundary structure evolution was observed in two MgO-doped silicon nitride specimens (Norton, NC-132) that were tested in ultra-long flexure stress rupture experiments with an applied stress of 266 MPa and fractured at 14 941 and 17 376 h. Transmission electron microscopy showed that, although the starting material had a secondary glass phase both at multi-grain junctions and along grain boundaries, the tested specimens contained no residual glass phase. Concurrent with the elimination of the secondary glass phase, a continuous network of cracked grain boundaries was observed after long-term flexure testing consistent with the concept of elastic creep. It is, therefore, concluded that at ultra-long annealing times, this material is affected by creep deformation via microcrack nucleation and growth due to the depletion of the amorphous siliceous grain-boundary phase, which is seen as a truly transient, fugitive secondary phase.     

Anomalous Defects and Dynamic Failure of Armor Ceramics

The ballistic performance of state-of-the-art silicon carbide armor material can exhibit a fairly wide variability in certain test configurations, which, it is proposed, may be due to the presence of large (>0.1 mm), rare defects, termed, herein, "anomalous" defects. SiC rubble resulting from ballistic tests was examined, as were quasi-static test samples. Ballistic fragment fracture surfaces revealed large carbonaceous defects that seemed to affect fracture path and mode. Low-strength biaxial flexure samples demonstrated similar defects (>0.1 mm) as failure origins. Carbonaceous defects similar in appearance but smaller in size were also found at the fracture origins of SiC bend bars. Frequently, alumina inclusions were found within the carbonaceous discontinuities. These alumina inclusions may cause the graphitic regions to form during sintering. The random distribution of such large, rare carbonaceous discontinuities from sample-to-sample, as well as batch-to-batch variability, may explain high ballistic variability for SiC armor ceramics.     

Time‐multiplexed tiled projection system with improved pixel and spatial resolution

We propose two methods to increase the pixel and spatial resolution of Digital Micromirror Devices (DMD)‐based projectors by utilizing the large bandwidth provided by their high pattern rates. By varying the intensity of the illumination for each binary pattern displayed on the DMD, the time required to display an 8‐bit grayscale image can be reduced by up to factor 32 compared to using constant illumination and binary pulse‐width modulation (BPWM). The high image rate projection is then spatially separated by either using a galvanometer scanner or sequentially illuminating the DMD from different directions, thus creating multiple independently addressable projections which are then tiled to form a larger, higher resolution image.     

A switched emissive transparent display with controllable per‐pixel opacity

An emissive transparent display with per‐pixel opacity employs rapid synchronized switching of a transparent display and transparent backlight between content with a scattering luminous backlight and masks with a clear unlit backlight. A 144 fps transparent LCD panel is used in conjunction with a transparent backlight, controllably diffusive smartglass screen, and optional switching background lighting. The display is capable of producing opaque emissive content on a transparent field for novel transparent display and compact spatial augmented reality applications.