变频调速技术在济钢焦化厂高压氨水泵上的应用

济钢焦化厂高压氨水泵变频调速系统采用变频器和PLC相结合的方式 ,具有调速精度高、节能等多种功能 ,保证氨水泵正常工作。全年可增加经济效益 77.3万元。     

Cu－MnO_2同槽电解半工业试验研究

提出了Ｃｕ－ＭｎＯ＿２同槽电解的新工艺，在同一电解槽同时得到电铜和电解二氧化锰两种产品，该新工艺具有低电耗、低酸雾污染和低酸耗等优点．     

静电火灾的产生及其防治

文章详细分析了静电产生的机理，指出积聚静电电荷的多少与材料的电阻率和介电常数有关。讨论了静电火灾发生的条件，指出静电火灾的发生具有隐蔽性、复杂性和突发性。但只要对其规律进行深入地研究，可以找到有效地防止静电火灾发生的办法。     

半导体激光器用铷D2线光电流谱稳频

本文报导了用铷原子７８００Ａ光电流谱来稳定半导体激光器的工作，在光电流谱线的中部发现了有利于稳频的凹陷，将半导体激光器频率锁定在凹陷的中央，估算的频率稳定度为１ＭＨｚ。     

微波介质谐振器介电参数的测量

本文讨论了微波介质谐振器介电参数测试技术。用研制的测试装置对多个介质样品进行了实测，结果表明，本文的分析与实际值是吻合的。该测试技术可对微波介质谐振器的复介电常数进行迅速、准确、可靠、宽频带、无损伤、自动化和批量检测，具有较强的实用性。     

Synchronized chaotic optical communications at high bit rates

Basic issues regarding synchronized chaotic optical communications at high bit rates using semiconductor lasers are considered. Recent experimental results on broadband, high-frequency, phase-locked chaos synchronization, and message encoding-decoding at 2.5 Gb/s are presented. System performance at a bit rate of 10 Gb/s is numerically studied for the application of three encryption schemes, namely chaos shift keying, chaos masking, and additive chaos modulation, to three chaotic semiconductor laser systems, namely the optical injection system, the optical feedback system, and the optoelectronic feedback system. By causing synchronization error in the forms of synchronization deviation and desynchronization bursts, the channel noise and the laser noise both have significant effects on the system performance at high bit rates. Among the three laser systems, the optoelectronic feedback system has the best performance while the optical feedback system has the worst. Among the three encryption schemes, only the performance of additive chaos modulation with low-noise lasers is acceptable at high bit rates.     

微电量测量中信号的拾取和放大

本文介绍了静电计级运算放大器在工业微电量测量中的应用,并且给出了实际的电路结构和相关的噪声解决办法。     

45号钢二次枝晶臂间距与冷却速度的关系

本文利用可控平均冷却速度的单向凝固实验炉测定了４５号钢在不同平均冷却速度下的冷却曲线，由此得到其在凝固期间的平均冷却速度Ｒ，相应地测量了不同平均冷却速度下试样的二次枝晶臂间距Ｓ２，通过回归，得到了如下关系式：Ｓ２＝７２７Ｒ－０．４１，并将引式成功地应用于实际生产中。     

A greedy algorithm to determine the number of transporters in a cyclic electroplating process

This paper presents a local optimization algorithm for minimizing the number of transporters required for material handling in a cyclic processing line. Within a cycle, a given set of transportation operations must be performed. Each operation consists of picking up a work-in-process job at a stage and delivering it to the next stage. The length of time that a job can remain at a particular stage is restricted by a time window. The transporters that perform the operations move on a shared track, and traffic collisions must be avoided during their movements. To avoid traffic collisions, the operations are partitioned into groups, where each group is served by a single transporter. A local optimal solution is obtained when the group sizes are maximized. We show that the duals of the linear programming subproblems formulated in the process of maximizing the group sizes are specially structured shortest-path problems. This leads to an effective search method for the maximization problem. Conditions when die proposed algorithm achieves die global optimal solution are discussed. The algorithm's performance is evaluated on both randomly generated test problems and benchmark problems.     

High performance CMOS current comparator

A new high-speed CMOS current comparator is described. By changing the buffer of an existing comparator from class B to class AB operation, voltage swings are reduced, resulting in greater speed for small input currents. Simulation results employing a 1.6μm CMOS technology show the response time to a 0.1μA input current to be 11ns and the power dissipation to be 1.4mW, resulting in a five times improvement in speed/power ratio over existing high-speed current comparators