Biochips for Cell Biology by Combined Dip‐Pen Nanolithography and DNA‐Directed Protein Immobilization

A general methodology for patterning of multiple protein ligands with lateral dimensions below those of single cells is described. It employs dip pen nanolithography (DPN) patterning of DNA oligonucleotides which are then used as capture strands for DNA‐directed immobilization (DDI) of oligonucleotide‐tagged proteins. This study reports the development and optimization of PEG‐based liquid ink, used as carrier for the immobilization of alkylamino‐labeled DNA oligomers on chemically activated glass surfaces. The resulting DNA arrays have typical spot sizes of 4–5 μm with a pitch of 12 μm micrometer. It is demonstrated that the arrays can be further functionalized with covalent DNA‐streptavidin (DNA‐STV) conjugates bearing ligands recognized by cells. To this end, biotinylated epidermal growth factor (EGF) is coupled to the DNA‐STV conjugates, the resulting constructs are hybridized with the DNA arrays and the resulting surfaces used for the culturing of MCF‐7 (human breast adenocarcinoma) cells. Owing to the lateral diffusion of transmembrane proteins in the cell's plasma membrane, specific recruitment and concentration of EGF receptor can be induced specifically at the sites where the ligands are bound on the solid substrate. This is a clear demonstration that this method is suitable for precise functional manipulations of subcellular areas within living cells.     

Search for Superconductivity in Ultra-dense Deuterium D(?1) at Room Temperature: Depletion of D(?1) at Field Strength >0.05 T

Ultra-dense deuterium D(?1) is expected to be both a superfluid and a superconductor as shown by recent theoretical research. Condensed D(?1) can be deposited on surfaces by a source which produces a stream of clusters. A magnetic field strongly influences the type of material formed. Very little of D(?1) and of the form D(1), which is strongly coupled to D(?1), exists on the magnet surface or within several mm from the magnet surface. Even the formation of D(?1) on the source emitter is strongly influenced by a magnetic field, with a critical field strength in the range 0.03?C0.07 T. Higher excitation levels D(2) and D(3) dominate in a magnetic field. The excitation level D(2) is now observed for the first time. The removal of D(?1) and D(1) in strong magnetic fields is proposed to be due to a Meissner effect in long D(?1) clusters by large-orbit electron motion. The lifting of long D(?1) clusters above the magnet surface is slightly larger than expected, possibly due to the coupling to D(1). The previously reported oscillation between D(?1) and D(1) in an electric field is proposed to be due to destruction of D(?1).     

Molecularly imprinted polymer coatings for open-tubular capillary electrochromatography prepared by surface initiation

Molecularly imprinted polymer coatings were synthesized in fused-silica capillary columns by the use of a surface-coupled radical initiator. The coatings were prepared using either toluene, dichloromethane, or acetonitrile in the prepolymerization mixtures and were 0.15-2 microm thick as determined by scanning electron microscopy. Solvent-dependent differences in appearance were observed. All the molecularly imprinted polymer-based open-tubular capillary columns were able to separate the enantiomers of propranolol by means of electrochromatography. Electrochromatographic performance was found to be dependent on the type of solvent used during the synthesis.     

Structural capacitor materials made from carbon fibre epoxy composites

In this paper, an approach towards realising novel multifunctional polymer composites is presented. A series of structural capacitor materials made from carbon fibre reinforced polymers have been developed, manufactured and tested. The structural capacitor materials were made from carbon fibre epoxy pre-preg woven laminae separated by a paper or polymer film dielectric separator. The structural capacitor multifunctional performance was characterised measuring capacitance, dielectric strength and interlaminar shear strength. The developed structural CFRP capacitor designs employing polymer film dielectrics (PA, PC and PET) offer remarkable multifunctional potential.     

Localized surface plasmon resonance spectroscopy of single silver nanocubes

In this work, we use dark-field microscopy to observe a new plasmon resonance effect for a single silver nanocube in which the plasmon line shape has two distinct peaks when the particles are located on a glass substrate. The dependence of the resonance on nanocube size and shape is characterized, and it is found that the bluer peak has a higher figure of merit for chemical sensing applications than that for other particle shapes that have been studied previously. Comparison of the measured results with finite difference time domain (FDTD) electrodynamics calculations enables us to confirm the accuracy of our spectral assignments.     

Active and passive stabilization of body pitch in insect flight

Flying insects have evolved sophisticated sensory–motor systems, and here we argue that such systems are used to keep upright against intrinsic flight instabilities. We describe a theory that predicts the instability growth rate in body pitch from flapping-wing aerodynamics and reveals two ways of achieving balanced flight: active control with sufficiently rapid reactions and passive stabilization with high body drag. By glueing magnets to fruit flies and perturbing their flight using magnetic impulses, we show that these insects employ active control that is indeed fast relative to the instability. Moreover, we find that fruit flies with their control sensors disabled can keep upright if high-drag fibres are also attached to their bodies, an observation consistent with our prediction for the passive stability condition. Finally, we extend this framework to unify the control strategies used by hovering animals and also furnish criteria for achieving pitch stability in flapping-wing robots.     

The effect of accuracy motivation on anchoring and adjustment: Do people adjust from provided anchors?

Increasing accuracy motivation (e.g., by providing monetary incentives for accuracy) often fails to increase adjustment away from provided anchors, a result that has led researchers to conclude that people do not effortfully adjust away from such anchors. We challenge this conclusion. First, we show that people are typically uncertain about which way to adjust from provided anchors and that this uncertainty often causes people to believe that they have initially adjusted too far away from such anchors (Studies 1a and 1b). Then, we show that although accuracy motivation fails to increase the gap between anchors and final estimates when people are uncertain about the direction of adjustment, accuracy motivation does increase anchor–estimate gaps when people are certain about the direction of adjustment, and that this is true regardless of whether the anchors are provided or self-generated (Studies 2, 3a, 3b, and 5). These results suggest that people do effortfully adjust away from provided anchors but that uncertainty about the direction of adjustment makes that adjustment harder to detect than previously assumed. This conclusion has important theoretical implications, suggesting that currently emphasized distinctions between anchor types (self-generated vs. provided) are not fundamental and that ostensibly competing theories of anchoring (selective accessibility and anchoring-and-adjustment) are complementary. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Retained Austenite Transformation during Heat Treatment of a 5 Wt Pct Cr Cold Work Tool Steel

Retained austenite transformation was studied for a 5 wt pct Cr cold work tool steel tempered at 798 K and 873 K (525 °C and 600 °C) followed by cooling to room temperature. Tempering cycles with variations in holding times were conducted to observe the mechanisms involved. Phase transformations were studied with dilatometry, and the resulting microstructures were characterized with X-ray diffraction and scanning electron microscopy. Tempering treatments at 798 K (525 °C) resulted in retained austenite transformation to martensite on cooling. The martensite start (M _s ) and martensite finish (M _f ) temperatures increased with longer holding times at tempering temperature. At the same time, the lattice parameter of retained austenite decreased. Calculations from the M _s temperatures and lattice parameters suggested that there was a decrease in carbon content of retained austenite as a result of precipitation of carbides prior to transformation. This was in agreement with the resulting microstructure and the contraction of the specimen during tempering, as observed by dilatometry. Tempering at 873 K (600 °C) resulted in precipitation of carbides in retained austenite followed by transformation to ferrite and carbides. This was further supported by the initial contraction and later expansion of the dilatometry specimen, the resulting microstructure, and the absence of any phase transformation on cooling from the tempering treatment. It was concluded that there are two mechanisms of retained austenite transformation occurring depending on tempering temperature and time. This was found useful in understanding the standard tempering treatment, and suggestions regarding alternative tempering treatments are discussed.     

A setup for the coupling of a thin-layer electrochemical flow cell to electrospray mass spectrometry

A novel setup for the coupling of a commercially available thin-layer cell to electrospray mass spectrometry (ESI-MS) which allows the electrochemical reactions at the counter electrode to be straightforwardly separated from the flow into the mass spectrometer has been developed. In this way, interferences from reaction products formed at the counter electrode can be minimized. This reduces the risk of changes in the mass spectra as a result of electrochemical reactions in the solution. The described setup also enables the working electrode to be positioned close to the electrospray (ESI) emitter without the need for a grounding point or a long transfer line between the electrochemical cell and the electrospray emitter. By decoupling the electrochemical reactions in the flow cell and those in the electrospray emitter, improved facilities for studies of electrochemical reactions are obtained through a better control of the potential of the working electrode. The setup has been used to study the oxidation of a drug (Olsalazine), which previously has been found to involve chemical follow-up reactions. It is also demonstrated that uncharged thiols can be detected in ESI-MS after spontaneous adsorption on a gold working electrode, followed by oxidative desorption to yield sulfinates or sulfonates. This adsorption and potential-controlled desorption has been used for the preconcentration of micromolar concentrations of 1-hexanethiol as well as for desalting of solutions containing micromolar concentrations of thiols. The results indicate that the present on-line coupling of an electrochemical cell to ESI-MS provides promising possibilities for sample preconcentration, matrix exchange (including desalting), and ionization of neutral compounds, such as thiols.     

Psychophysiological stress responses, muscle tension, and neck and shoulder pain among supermarket cashiers.

This study examined psychological and physiological stress, as well as muscle tension and musculoskeletal symptoms, among 72 female supermarket cashiers. Stress levels were found to be significantly elevated at work, as reflected in the catecholamines, blood pressure, heart rate, electromyographic (EMG) activity, and self-reports. Fifty cashiers (70%) suffering from neck-shoulder pain (trapezius myalgia) were found to have higher EMG activity at work and reported more tension after work. Women who kept a diary for 1 week and reported more musculoskeletal pain (above the median) were older, had higher blood pressure, and reported more work stress and psychosomatic symptoms. The elevated stress levels at work are consistent with data from workers involved in other types of repetitive tasks and can be important for the high prevalence of neck and shoulder symptoms among the cashiers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)