The use of network delay estimation for multimedia data retrieval

Multimedia data have specific temporal presentation requirements. For example in video conferencing applications the voice and images of the participants must be delivered and presented synchronously. These requirements can be achieved by scheduling or managing system resources. We present a technique called limited a priori scheduling (LAP) to manage the delivery channel from source to destination for digital multimedia data. By using delay estimation a LAP scheduler can retrieve stored digital media spanning arbitrary networks with unspecified delays. The use of delay estimation also facilitates selective degradation of service in bandwidth and buffer limited situations. Such degradation enables the continuous real-time playout and synchronization of various media arriving from different sources. The performance of the LAP scheduler is described based on implementation and experimentation using Ethernet     

Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.     

Microring resonator channel dropping filters

Microring resonators side coupled to signal waveguides provide compact, narrow band, and large free spectral range optical channel dropping filters. Higher order filters with improved passband characteristics and larger out-of-band signal rejection are realized through the coupling of multiple rings. The analysis of these devices is approached by the novel method of coupling of modes in time. The response of filters comprised of an arbitrarily large dumber of resonators may be written down by inspection, as a continued fraction. This approach simplifies both the analysis and filter synthesis aspects of these devices     

Determination of chromium valence over the range Cr(0)–Cr(VI) by electron energy loss spectroscopy

Chromium is a redox active 3d transition metal with a wide range of valences (−2 to +6) that control the geochemistry and toxicity of the element. Therefore, techniques that measure Cr valence are important bio/geochemical tools. Until now, all established methods to determine Cr valence were bulk techniques with many specific to a single, or at best, only a few oxidation state(s). We report an electron energy loss spectroscopy (EELS) technique along with an extensive suite of affined reference spectra that together, unlike other methods, can determine Cr valence (or at least constrain the possible valences) at high-spatial resolution (tens-of-nanometer scale) across a wide valence range, Cr(0)–Cr(VI). Fine structure of Cr-L_2,3 edges was parametrized by measurement of the chemical shift of the L₃ edge and the ratio of integrated intensity under the L₃ and L₂ edges. These two parameterizations were correlated to Cr valence and also the dⁿ orbital configuration which has a large influence on L-edge fine structure. We demonstrate that it is not possible to unambiguously determine Cr valence from only one fine-structure parameterization which is the method employed to determine metal valence by nearly all previous EELS studies. Rather, multiple fine-structure parameterizations must be used together if the full range of possible Cr valences is considered. However even with two parameterizations, there are limitations. For example, distinguishing Cr(IV) from Cr(III) is problematic and it may be difficult to distinguish low-spin Cr(II) from Cr(III). Nevertheless, when Cr is known to be divalent, low- and high-spin dⁿ orbital configurations can be readily distinguished.     

Factors Influencing the Adhesion of Microorganisms to Surfaces

Starvation, growth phase, and carbon source influenced bacterial cell surface hydrophobicity. Both the number and kind of microorganisms that colonized metal surfaces depended on the type of metal and the presence of an imposed electrical potential. No significant differences in attachment and growth of a pure culture were observed when metal surfaces were dipped in an exogenous energy source. The chemical composition of naturally occurring adsorbed organic films on metal surfaces was shown to be independent of surface composition and polarization.     

The prediction of crack growth in bonded joints under cyclic-fatigue loading I. Experimental studies

The performance of adhesively-bonded joints under monotonic and cyclic-fatigue loading has been investigated using a fracture-mechanics approach. The joints consisted of an epoxy film adhesive which was employed to bond aluminium-alloy substrates. The effects of undertaking cyclic-fatigue tests in (a) a ‘dry’ environment of 55% relative humidity at 23°C, and (b) a ‘wet’ environment of immersion in distilled water at 28°C were investigated. In particular, the influence of employing different surface pretreatments for the aluminium-alloy substrates was examined. In addition, single-lap joints were tested under cyclic fatigue loading in the two test environments, and a back-face strain technique has been used which revealed that crack propagation, rather than crack initiation, occupied the dominant proportion of the fatigue lifetime of the single-lap joints. In Part II, the data obtained in the present Part I paper will be employed to predict theoretically the lifetime of the adhesively-bonded single-lap joint specimens.     

Identifying Candidate Protein Markers of Acute Kidney Injury in Acute Decompensated Heart Failure

One-quarter of patients with acute decompensated heart failure (ADHF) experience acute kidney injury (AKI)—an abrupt reduction or loss of kidney function associated with increased long-term mortality. There is a critical need to identify early and real-time markers of AKI in ADHF; however, to date, no protein biomarkers have exhibited sufficient diagnostic or prognostic performance for widespread clinical uptake. We aimed to identify novel protein biomarkers of AKI associated with ADHF by quantifying changes in protein abundance in the kidneys that occur during ADHF development and recovery in an ovine model. Relative quantitative protein profiling was performed using sequential window acquisition of all theoretical fragment ion spectra–mass spectrometry (SWATH–MS) in kidney cortices from control sheep (n = 5), sheep with established rapid-pacing-induced ADHF (n = 8), and sheep after ~4 weeks recovery from ADHF (n = 7). Of the 790 proteins quantified, we identified 17 candidate kidney injury markers in ADHF, 1 potential kidney marker of ADHF recovery, and 2 potential markers of long-term renal impairment (differential abundance between groups of 1.2–2.6-fold, adjusted p < 0.05). Among these 20 candidate protein markers of kidney injury were 6 candidates supported by existing evidence and 14 novel candidates not previously implicated in AKI. Proteins of differential abundance were enriched in pro-inflammatory signalling pathways: glycoprotein VI (activated during ADHF development; adjusted p < 0.01) and acute phase response (repressed during recovery from ADHF; adjusted p < 0.01). New biomarkers for the early detection of AKI in ADHF may help us to evaluate effective treatment strategies to prevent mortality and improve outcomes for patients.     

Effective harvesting,detection, and conversion of IR radiation due to quantum dots with built-in charge

We analyze the effect of doping on photoelectron kinetics in quantum dot [QD] structures and find two strong effects of the built-in-dot charge. First, the built-in-dot charge enhances the infrared [IR] transitions in QD structures. This effect significantly increases electron coupling to IR radiation and improves harvesting of the IR power in QD solar cells. Second, the built-in charge creates potential barriers around dots, and these barriers strongly suppress capture processes for photocarriers of the same sign as the built-in-dot charge. The second effect exponentially increases the photoelectron lifetime in unipolar devices, such as IR photodetectors. In bipolar devices, such as solar cells, the solar radiation creates the built-in-dot charge that equates the electron and hole capture rates. By providing additional charge to QDs, the appropriate doping can significantly suppress the capture and recombination processes via QDs. These improvements of IR absorption and photocarrier kinetics radically increase the responsivity of IR photodetectors and photovoltaic efficiency of QD solar cells.