The rural–urban equity nexus of Metro Manila’s water system

ABSTRACT

This article examines equity concerns and inherent conflicts related to rural–urban water supply allocation and use, with focus on Metro Manila. Going beyond the much-discussed difficulty farmers experience from an allocation policy prioritizing urban water requirements, it shows that inequity in raw water allocation is linked to, and further exacerbated by, inequities in urban domestic water provision. Moreover, it highlights the need for broader equity reviews, using the concept of the rural–urban water equity nexus to draw attention to key equity considerations across space and scale that otherwise might remain invisible.     

Modelling and performance of a small siphonic hydropower system

A siphon turbine is a low-head, axial-flow hydropower device that can be installed across an impound structure, such as a weir. A laboratory-scale siphon turbine and generator system is built from both off-the-shelf components and bespoke components designed using well-documented guidance. This paper proposes a modelling method for the system, which allows performance to be assessed as a function of operating variables including head, electric load, runner speed and flow rate. An un-modified, commercially available propeller is used for the runner, whose blade geometry is defined within the model as a set of polynomials. This enables flow angles at any radial position on a blade to be determined as a function of the system operating point. Consequently, the impact of design changes on system performance can be quantified, such as part-load efficiency for example. Testing using the laboratory-scale system is conducted up to a maximum gross head of 0.25 m, to validate the component models and then to demonstrate that the final system model provides satisfactory agreement with experiments over the operational speed and head range. The model therefore permits rapid conceptual design to be carried out without the need for computationally intensive co-optimisation of components.     

Development and Integration of Sub-hourly Rainfall–Runoff Modeling Capability Within a Watershed Model

Increasing urbanization changes runoff patterns to be flashy and instantaneous with decreased base flow. A model with the ability to simulate sub-daily rainfall–runoff processes and continuous simulation capability is required to realistically capture the long-term flow and water quality trends in watersheds that are experiencing urbanization. Soil and Water Assessment Tool (SWAT) has been widely used in hydrologic and nonpoint sources modeling. However, its subdaily modeling capability is limited to hourly flow simulation. This paper presents the development and testing of a sub-hourly rainfall–runoff model in SWAT. SWAT algorithms for infiltration, surface runoff, flow routing, impoundments, and lagging of surface runoff have been modified to allow flow simulations with a sub-hourly time interval as small as one minute. Evapotranspiration, soil water contents, base flow, and lateral flow are estimated on a daily basis and distributed equally for each time step. The sub-hourly routines were tested on a 1.9 km² watershed (70% undeveloped) near Lost Creek in Austin Texas USA. Sensitivity analysis shows that channel flow parameters are more sensitive in sub-hourly simulations (Δt = 15 min) while base flow parameters are more important in daily simulations (Δt = 1 day). A case study shows that the sub-hourly SWAT model reasonably reproduces stream flow hydrograph under multiple storm events. Calibrated stream flow for 1 year period with 15 min simulation (R ² = 0.93) shows better performance compared to daily simulation for the same period (R ² = 0.72). A statistical analysis shows that the improvement in the model performance with sub-hourly time interval is mostly due to the improvement in predicting high flows. The sub-hourly version of SWAT is a promising tool for hydrology and non-point source pollution assessment studies, although more development on water quality modeling is still needed.     

Non‐resonant Element in Slotted Ground Plane for Multiband Antenna Operation

New ways of achieving small, multiband, multifunctional, and standard solutions for mobile handset antennas are demanded in the current wireless market. A non‐resonant element of , a matching network, and a slotted ground plane are proposed to satisfy mobile market demands that require multiband operation and small antenna solutions. The main advantage of the proposed design is that with only one non‐resonant element of considerably small size (0.015λ, 900 MHz), the handset is capable of providing operation at mobile bands.     

Scientific evidences beyond the application of inactive dry yeast preparations in winemaking

In recent years the use of inactive dry yeast (IDY) preparations such as inactive yeast, yeast autolysates, yeast extracts and yeast hulls or walls have been widely used within the oenological industry to improve either technological processes or the sensory characteristics of wines. Some of these preparations have very specific applications and there are currently many of these products in the market under different brands that promise different ways of improving wine characteristics. Nevertheless, scientific information about the chemistry beyond their use and their action mode is still scarce.The objective of this review is to revise the different applications of specific IDY preparations in winemaking, on the basis of their action mechanisms taking into consideration the scientific information available, underlining the necessity of more scientific work in order to better characterize their chemical composition, their action mechanisms, and the establishment of better criteria for their oenological use.     

Assessment of sediment quality and pore water ecotoxicity in Kebir Rhumel basin (NE-Algeria): a combined approach

The objectives of this study are to use different approaches to assess the current pollution status in the wadis of the Kebir Rhumel basin. First, sediment trace metal contents were measured by flame atomic absorption spectroscopy. Then, sediment quality was assessed on the basis of contamination assessment indexes such as: Geoaccumulation Index (Igeo), Contamination factor (C(f)), Contamination degree (C(d)), Sediment Pollution Index (SPI) and SEQ guidelines (Consensus Sediment Quality Guidelines). In addition, several toxicity tests (Daphnia magna mobility inhibition acute test-48 h, Aliivibrio fischeri luminescence inhibition acute test - 15/30 mn and Pseudokirchneriella subcapitata growth inhibition chronic test - 72 h) were conducted to assess sediment pore water ecotoxicity. Trace metal concentrations followed the order: Mn > Zn > Pb > Cr > Cu > Ni > Co > Cd. Indexes used indicate varying degrees of sediment quality. Igeo, C(f), C(d) and SPI reveal a polymetallic contamination dominated by two or more elements in which Cd, Cu and Pb are of greatest concern. SEQ guidelines showed that biological effects on fauna would likely be observed occasionally and/or frequently for Cd, Cr, Cu, Pb and Zn contents. Test organisms exposed to sediment pore water showed that the algal P. subcapitata test was more sensitive than the D. magna and A. fischeri tests. Hence, algal growth inhibition proved to be the most sensitive response to contaminants present in sediment extracts but a significant relationship with trace metal contents was not demonstrated.     

Spatial and seasonal variations and ecotoxicological significance of sediment trace metal concentrations in Kebir-Rhumel basin (Northeast of Algeria)

This study sought to assess sediment contamination by trace metals (cadmium, chromium, cobalt, copper, manganese, nickel, lead and zinc), to localize contaminated sites and to identify environmental risk for aquatic organisms in Wadis of Kebir Rhumel basin in the Northeast of Algeria. Water and surficial sediments (0-5 cm) were sampled in winter, spring, summer and autumn from 37 sites along permanent Wadis of the Kebir Rhumel basin. Sediment trace metal contents were measured by Flame Atomic Absorption Spectroscopy. Trace metals median concentrations in sediments followed a decreasing order: Mn > Zn > Pb > Cr > Cu > Ni > Co > Cd. Extreme values (dry weights) of the trace metals are as follows: 0.6-3.4 microg/g for Cd, 10-216 microg/g for Cr, 9-446 microg/g for Cu, 3-20 microg/g for Co, 105-576 microg/g for Mn, 10-46 microg/g for Ni, 11-167 microg/g for Pb, and 38-641 microg/g for Zn. According to world natural concentrations, all sediments collected were considered as contaminated by one or more elements. Comparing measured concentrations with American guidelines (Threshold Effect Level: TEL and Probable Effect Level: PEL) showed that biological effects could be occasionally observed for cadmium, chromium, lead and nickel levels but frequently observed for copper and zinc levels. Sediment quality was shown to be excellent for cobalt and manganese but medium to bad for cadmium, chromium, copper, lead, nickel and zinc regardless of sites.     

Multi-reservoir Operation Rules: Multi-swarm PSO-based Optimization Approach

Reservoir operation rules are intended to help an operator so that water releases and storage capacities are in the best interests of the system objectives. In multi-reservoir systems, a large number of feasible operation policies may exist. System engineering and optimization techniques can assist in identifying the most desirable of those feasible operation policies. This paper presents and tests a set of operation rules for a multi-reservoir system, employing a multi-swarm version of particle swarm optimization (MSPSO) in connection with the well-known HEC-ResPRM simulation model in a parameterization–simulation–optimization (parameterization SO) approach. To improve the performance of the standard particle swarm optimization algorithm, this paper incorporates a new strategic mechanism called multi-swarm into the algorithm. Parameters of the rule are estimated by employing a parameterization–simulation–optimization approach, in which a full-scale simulation model evaluates the objective function value for each trial set of parameter values proposed with an efficient version of the particle swarm optimization algorithm. The usefulness of the MSPSO in developing reservoir operation policies is examined by using the existing three-reservoir system of Mica, Libby, and Grand Coulee as part of the Columbia River Basin development. Results of the rule-based reservoir operation are compared with those of HEC-ResPRM. It is shown that the real-time operation of the three reservoir system with the proposed approach may significantly outperform the common implicit stochastic optimization approach.     

Calcium lactate effect on the shelf life of osmotically dehydrated guavas

The effect of calcium lactate on osmodehydrated guavas in sucrose and maltose solutions was monitored during storage under passive modified atmosphere for 24 d at 5 °C. Sample texture and color characteristics, microbial spoilage, sensory acceptance, structural changes, and gas composition inside the packages were periodically evaluated. Calcium lactate inhibited microbial growth on guavas, with yeast and mold counts in the order of 10(2) CFU/g throughout storage. The calcium salt reduced respiration rate of guava products, showing O(2) and CO(2) concentrations around 18% and 3% inside the packages. A firming effect on fruit texture, with up to 5 and 2 times higher stress and strain at failure values and tissue structure preservation could also be attributed to calcium lactate use. However, fruits treated with calcium lactate, osmodehydrated in maltose and sucrose solutions, showed sensory acceptance scores below the acceptability limit (4.5) after 13 and 17 d of storage, respectively.