Crystallographic electron microscopy

We present a family of techniques for the transmission electron microscope that generate surface zone-axis patterns. These patterns display the variation of the diffracted-beam intensity as a function of the angle of the incident electrons. The conditions of the experiments are those of reflection high-energy electron diffraction at near grazing incidence. The techniques are: surface convergent-beam diffraction, a surface analogue of the Tanaka method and a modified double-rocking scheme. Experimental results are presented for diffraction from surfaces of MgO and MoS₂. We anticipate that surface zone-axis patterns (surface ZAPs) will become established as an important tool for surface characterization, especially when used in conjunction with high-resolution surface imaging and surface energy loss spectroscopy; surface ZAPs may be expected to play, in surface analysis, a role analogous to that played by convergent-beam diffraction in normal transmission electron microscopy.     

Modeling Power Supply Noise in Delay Testing

Excessive power supply noise during test can cause overkill. This article discusses two models for supply noise in delay testing and their application to test compaction. The proposed noise models avoid complicated power network analysis, making them much faster than existing power noise analysis tools. can cause performance degradation and     

Features of the photoconductivity of iodine-doped cotton fibers illuminated in the fundamental absorption range

The photoelectric properties of cotton fibers treated with iodine were studied in the fundamental absorption range. The samples exhibit a sublinear illumination-current characteristic and a long-term relaxation of photoconductivity (PC) after UV irradiation (hν=5 eV) of the iodine-doped fibers. A PC mechanism is proposed which explains both the nonlinear variation of photocurrent with illumination intensity and the PC decay according to a bimolecular recombination law after UV irradiation of the iodine-doped fiber in the fundamental absorption range.     

On Singularities of the Physical Fields at the Edge of a Composite Wedge

We propose analytic procedures capable of evaluation of the orders of power singularities of magnetic fields at the edge of a composite ferromagnetic wedge bordering with a vacuum. The same procedure is used to study the singularities at the edge of a composite piezoceramic wedge. As a result, we present the plots characterizing the dependences of the order of singularities on the wedge angles of the wedges used to form the analyzed composite wedge and the combination of their physical parameters.     

Methods for Estimating Theoretically the Influence of Ion Scattering and Reflection on the Isotopic Sensitivity of Static Magnetic Mass-Spectrometers

For purposes of optimizing ion-optical systems, analyzer construction, and pump placement in static magnetic mass-spectrometers for isotopic analysis of uranium compounds, a comparative analysis is made and a review is given of methods described in the literature for theoretical estimates of the influence of scattering and reflection of ions on the isotopic sensitivity. Conclusions which make it possible to solve the problem are drawn.     

Optimal Massing Liquid Volume Determination by Energy Consumption Measurement: Study of the Influence of Some Physical Properties of Solvents and Products Used

This study tried to investigate, by the power comsumption technique, the influence of the powder's and solvent's properties on wet granulation.

It could be shown that the required amount of granulation liquid decreases when the particle size of the powder to be granulated increases. This relationship is however only true when the particle size distribution of the powder to be granulated is rather narrow.

Powders having the same solubility in different solvents require the same optimal liquid quantity for granulation, but the properties of resulting granules depend on surface tension and wetting properties of the solvent.

When the powder to be granulated contains crystallisation water, the temperature rising in the mixer can be sufficient to liberate this water, which must be taken into account in the optimal granulation liquid requirement.

The effect of a macromolecular binder (PVP, HPMC) has also been studied: the optimal liquid quantity required changes with the kind of binder used and the manufacturing process (binder used in solution or added as dry powder).

It was also shown that in the case of lactose, the optimal quantity of PVP or HPMC can be determined from the power consumption records and from the granules friability studies     

Formation and elimination of surface ion milling defects in cadmium telluride,zinc sulphide and zinc selenide

The nature of damage produced by low energy Ar⁺ ion and Ar atom milling in the II–VI semiconductors CdTe, ZnS and ZnSe is studied in detail by conventional and high resolution transmission electron microscopy. It is demonstrated that the damage consists of dense arrays of small dislocation loops near to each milled surface. When ion or atom milling of this type is used for thin specimen preparation prior to microscopy the loop arrays can seriously obscure images and so complicate their interpretation. This problem concerning the presence of artifactual defects can be greatly reduced by the use of reactive I⁺ ion milling for specimen thinning and, in the case of CdTe, spurious dislocation loop formation can be completely suppressed.     

Variations in Spectral Slope in Lake Taihu,a Large Subtropical Shallow Lake in China

Spectral slope (S), describing the exponential decrease of the absorption spectrum over a given wavelength range, is an important parameter in the study of of chromophoric dissolved organic matter (CDOM) dynamics, and also an essential input parameter in remote sensing models. Furthermore, S is often used as a proxy for CDOM composition, including the ratio of fulvic to humic acids and molecular weight. The relative broad range in S values reported in the literature can be explained by the different spectral ranges and fitting methods used. A single exponential model is used to fit the S values for 17 investigations involving 458 samples in Lake Taihu from January to October in 2004. The average S value was 15.18 ± 1.39 μm⁻¹ for the range of 280–500 nm, which fell within the range reported in the literature. The frequency distribution of S value basically obeyed a normal distribution. Significant differences in S values between summer and other seasons showed that phytoplankton degradation was one of the important sources of CDOM in summer, whereas CDOM mainly came from the river input in other seasons. Furthermore, the estimated S value decreased with increasing wavelength range used in regression. The maximum and minimum values derived from the regression were 17.89 ± 1.25 μm⁻¹ and 13.62 ± 2.11 μm⁻¹ for the wavelength ranges of 280–380 nm and 400–500 nm, respectively, a decrease of 23.9%. S values significantly decreased with the increase of CDOM absorption coefficients. CDOM absorption coefficients could be more appropriately estimated from exponential model introducing the variation of S with absorption coefficients, making them useful for a remote sensing bio-optical model of Lake Taihu. DOC-specific absorption coefficient a*(λ) and the parameter M describing molecular size of the humic molecules could also be used as a proxy for the sources and types of CDOM. A general relationship was found between S and a*(λ), and M values. S increased with the decrease of DOC-specific absorption coefficient and the increase of M corresponding to the decrease of molecular weight.