Residual service life test for a machine with friction

A test and heat friction based method for evaluation of the technical condition and residual service life of machinery is presented. It is applicable for mechanisms in which friction of the moving parts leads to wear and to increased heat release. The diagnostic parameter adopted is the peak point of the temperature change rate, observed on the machine casing during the starting stage. The method was tested on the SAWA power reduction gears of KOCKS heavy portal transtainer cranes. Copyright © 2006 John Wiley & Sons, Ltd.     

Hypothese von Coulomb und mehrachsige Betonfestigkeit

Coulomb‐hypothesis and multiaxial concrete strength. The article deals with the well‐known Coulomb‐hypothesis, applied to the multiaxial stress‐stage. The friction‐coefficient is defined as a shearing coefficient in main pressure direction and as an inner reciprocal value of the rigidity decrease in transverse direction to the pressure line. The cohesion of concrete texture, firstly assumed isotropic, is described as an inner prestressing compression force. In most cases the multiaxial calculation is experimentally proved. Although the comparison is acceptable, further experiments may be necessary.     

4D Biofabrication: 3D Cell Patterning Using Shape‐Changing Films

A novel approach for fabrication of 3D cellular structures using new thermosensitive shape‐changing polymer films with photolithographically patterned surface—4D biofabrication is reported. The surface of shape‐changing polymer films is patterned to selectively adsorb cells in specific regions. The 2D cell pattern is converted to the 3D cell structure after temperature‐induced folding of the polymer films. This approach has a great potential in the field of tissue engineering and bioscaffolds fabrication.     

A case study on the object-oriented framework for modeling product families with the dominant variation of the topology in the one-of-a-kind production

Traditional configuration-based product family modeling techniques do not yield favorable solutions for modeling the product families with the dominant product topology variations. This paper presents the case study for the modeling of variations of the product configuration, parameters, and topologies in mass production of custom windows and doors in a one-of-a-kind production (OKP) company. The case study is based on the object-oriented product family modeling framework we developed for OKP which is characterized by the dominant product variation by topology. The problem of variation in topology in our framework is solved by the manual model transformation in the computer-aided design module which creates a new metamodel of products with the desired topology and which is the basis for a further, automatic model transformation. Usage of our framework has a positive effect on the level of the product customizations and shortening of the leading time which helps OKP companies in obtaining a better position at the market. Our software solution for the designing and manufacturing of custom windows and doors based on our framework is implemented in more than 300 mostly small- and medium-sized enterprises. It proves our concept which can be used for the realization of the information systems for computer-aided one-of-a-kind production in the companies with a different production plan.     

Genetically Encoded FRET-Sensor Based on Terbium Chelate and Red Fluorescent Protein for Detection of Caspase-3 Activity

This article describes the genetically encoded caspase-3 FRET-sensor based on the terbium-binding peptide, cleavable linker with caspase-3 recognition site, and red fluorescent protein TagRFP. The engineered construction performs two induction-resonance energy transfer processes: from tryptophan of the terbium-binding peptide to Tb³⁺ and from sensitized Tb³⁺ to acceptor—the chromophore of TagRFP. Long-lived terbium-sensitized emission (microseconds), pulse excitation source, and time-resolved detection were utilized to eliminate directly excited TagRFP fluorescence and background cellular autofluorescence, which lasts a fraction of nanosecond, and thus to improve sensitivity of analyses. Furthermore the technique facilitates selective detection of fluorescence, induced by uncleaved acceptor emission. For the first time it was shown that fluorescence resonance energy transfer between sensitized terbium and TagRFP in the engineered construction can be studied via detection of microsecond TagRFP fluorescence intensities. The lifetime and distance distribution between donor and acceptor were calculated using molecular dynamics simulation. Using this data, quantum yield of terbium ions with binding peptide was estimated.     

SANS analysis of aqueous dispersions of Eu- and Gd-grafted nanodiamond particles

Abstract

The structure of detonation nanodiamond aqueous dispersions grafted by europium or gadolinium atoms was investigated by small-angle neutron scattering over a wide size scale from 1 to 3000?nm. Similar to the previous studies of nanodiamond suspensions, a strong association of the particle into developed aggregates was revealed. While the characteristic aggregate size depends on the modification of the dispersions and varies in a wide interval of 35–1500?nm, the fractal character of clusters of nanodiamond particles (packed in a specialized branched form with a fractal dimension of 2.4) remains unchanged independent of the cluster size. The effect of the aggregate size increase upon grafting is considered as a basis for the stability reduction mechanism at the microstructural level.     

Utilization of Extrinsic Fabry-Perot Interferometers with Spectral Interferometric Interrogation for Microdisplacement Measurement

The paper presents a number of signal processing approaches for the spectral interferometric interrogation of extrinsic Fabry-Perot interferometers (EFPIs). The analysis of attainable microdisplacement resolution is performed and the analytical equations describing the dependence of resolution on parameters of the interrogation setup are derived. The efficiency of the proposed signal processing approaches and the validity of analytical derivations are supported by experiments. The proposed approaches allow the interrogation of up to four multiplexed sensors with attained resolution between 30 pm and 80 pm, up to three times improvement of microdisplacement resolution of a single sensor by means of using the reference interferometer and noise-compensating approach, and ability to register signals with frequencies up to 1 kHz in the case of 1 Hz spectrum acquisition rate. The proposed approaches can be used for various applications, including biomedical, industrial inspection, and others, amongst the microdisplacement measurement.     

Synergistic effect of metal components of the low-loaded Pt-Ni-Cr/C catalyst in the bicyclohexyl dehydrogenation reaction

The problem of hydrogen storage in liquid organic hydrogen carriers is not only the choice of an appropriate organic substrate, but the development of a selective and active catalyst containing as low as possible noble metals. A synergistic effect of increasing conversion and selectivity in bicyclohexyl dehydrogenation to biphenyl on trimetallic Pt-Ni-Cr/C catalysts with an extremely low Pt loading (0.1 wt %), compared with bimetallic Ni-Cr/C and Pt/Ni/C systems, due to the supporting of platinum on nickel-chromium nanoparticles was established for the first time. The TOF values (mmol (H₂)/g_Pt min) for hydrogen evolution under conditions of the reaction of bicyclohexyl dehydrogenation (320 °C, 0.1 MPa) on Pt supported onto a Ni-Cr/С composite exceed by two orders of magnitude the values found for the two-component catalysts. The maximum amount of the evolved hydrogen correlates to the selectivity of the complete dehydrogenation of bicyclohexyl into biphenyl on the Pt-Ni-Cr/C catalyst. The formation of a Ni-Cr solid substitution solution in a Ni-Cr composite deposited on a carbon carrier is shown by magnetometry, XRD, and TEM methods.     

Scouting around 1,2,3,4-Tetrahydrochromeno[3,2-c]pyridin-10-ones for Single- and Multitarget Ligands Directed towards Relevant Alzheimer's Targets

A number of 1,2,3,4-tetrahydrochromeno[3,2-c]pyridin-10-one derivatives have been synthesized and screened against different targets involved in the onset and progression of Alzheimer's disease (AD), such as acetyl- and butyrylcholinesterase (AChE and BChE), monoamine oxidases A and B (MAO A and B), aggregation of β-amyloid (Aβ) and reactive oxygen species (ROS) production. Derivatives 1 c , 3 b , 4 and 5 a showed multifaceted profiles of promising anti-AD features and returned well-balanced multitargeting inhibitory activities. Moreover, compound 1 f , a potent and selective human MAO B inhibitor (IC₅₀=0.89 μM), proved to be a safe neuroprotectant in a human neuroblastoma cell line (SH-SY5Y) by improving viability impaired by Aβ_1–42 and pro-oxidant insult. Furthermore, structure–activity relationships (SARs) and docking models were derived in order to assist further hit-to-lead optimization stage.     

Ferroelectric liquid crystals: development of materials and fast electrooptical elements for non-display applications

A brief overview is presented describing the development of ferroelectric liquid crystal materials revealing the electroclinic and DHF (deformed helix ferroelectric) properties and electrooptical elements utilizing these materials.