Micelle-Mediated Extraction and Flame Atomic Absorption Spectrometric Method for Determination of Trace Cobalt Ions in Beverage Samples

A new method has been developed for preconcentration of cobalt at trace levels in beverage samples using calcon carboxylic acid as chelating agent and cetyl pyridinium chloride as an auxiliary ligand and entrapped into Triton X-114 prior to its determination by flame atomic absorption spectrometry (FAAS). The main parameters affecting cloud point extraction (CPE) efficiency such as pH, concentration of the complexing agent, cationic and nonionic surfactant concentration, salt effect, the equilibrium time, and temperature were investigated and optimized. After optimization of the CPE conditions, a preconcentration factor of 60, an enhancement factor of 106, and a detection limit of 0.20 μg L⁻¹ by (R ² = 0.9978) were obtained from a calibration curve constructed in the range of 0.7–100 μg L⁻¹. The proposed preconcentration procedure was successfully applied to the determination of cobalt ions in some real samples including natural drinking water, tap water, and beer and wine samples. The accuracy and validity of the proposed CPE/FAAS method was tested by means of five repeated analysis of reference standard materials (TM-253, a low level fortified water standard for trace elements). A good agreement between analytical results (28.8 and 28.5 μg L⁻¹ with calibration curve and standard addition curve method, respectively) and certified value (27.9 μg L⁻¹) for Co (p < 0.05) were obtained and verified by means of calibration curve and standard addition curve method using CPE procedure.     

An adaptive signal compression system with pre-specified reconstruction quality and compression rate

Two essential properties of a signal compression method are the compression rate and the distance between the original signal and the reconstruction from the compressed signal. These two properties are used to assess the performance and quality of the method. In a recent work [B. Tümer, B. Demir?z, Lecture Notes in Computer Science-Computer and Information Sciences, volume 2869, chapter Signal Compression Using Growing Cell Structures: A Transformational Approach, Springer Verlag, 2003, pp. 952-959], an adaptive signal compression system (ACS) is presented which defines the performance of the system as a function of the system complexity, system sensitivity and data size. For a compression method, it is desirable to formulate the performance of the system as a function of the system complexity and sensitivity to optimize the performance of the system. It would be further desirable to express the reconstruction quality in terms of the same system parameters so as to know up front what compression rate to end up with for a specific reconstruction quality. In this work, we modify ACS such that the modified ACS (MACS) estimates the reconstruction quality for a given system complexity and sensitivity. Once this relation is identified it is possible to optimize either compression rate or reconstruction quality with respect to system sensitivity and system complexity while limiting the other one.     

Feedback control for multi-resource usage of virtualised database server

Virtualisation and cloud computing have recently received significant attention. Resource allocation and control of multiple resource usages among virtual machines in virtualised data centres remains an open problem. Therefore, in this paper, our focus is to control CPU (central processing unit) usage and memory consumption of a virtual database machine in a data centre under a time-varying heavy workload. In addition to existing work, we attempt to control multiple outputs, such as the CPU usage and memory consumption of a virtualised database server (DBVM), via changing multiple server parameters, such as the CPU allocation and memory allocation, in real time. We indicated that a virtualised database server might be modelled as a linear time-unvarying system. We obtained and compared both MIMO (multi input–multi output) and multiple SISO (single input–single output) models of that system. We designed multiple SISO feedback controllers to achieve desired CPU usages and memory consumptions under workload.     

Evaluating sociotechnical dynamics in a simulated remotely-piloted aircraft system: a layered dynamics approach

As coordination mechanisms change and technology failures occur, a sociotechnical system must reorganise itself across human and technological layers to maintain effectiveness. We present a study examining reorganisation across communication, controls and vehicle layers of a remotely-piloted aircraft system (RPAS) using a layered dynamics approach. Team members (pilot; navigator; photographer) performed 5 simulated RPAS missions using different operator configurations, including all-human and human-autonomy teams. Reorganization (operationally defined using entropy) time series measured the changing system reorganisation profiles under different operator configurations and following autonomy failures. Correlations between these reorganisation profiles and team effectiveness scores describe the manner in which the system had to be coordinated to maintain effectiveness under these changing conditions. Four unplanned autonomy failures were analysed to visualise system reorganisation following a technology failure. With its objective and real-time modelling and measurement capabilities, layered dynamics complements existing systems thinking tools for understanding sociotechnical complexity and enhancing system effectiveness.

Practitioner summary: A layered dynamics approach for understanding how a sociotechnical system dynamically reorganises itself is presented. The layered dynamics of RPAS were analysed under different operator configurations and following autonomy failures. Layered dynamics complements existing system-thinking tools for modelling sociotechnical system complexity and effectiveness.

Abbreviation: RPAS: remotely-piloted aircraft system; HIS: human-systems integration; EAST: event analysis of systemic teamwork; H1: hypothesis 1; H2: hypothesis 2; H3: hypothesis 3; CERTT-STE: cognitive engineering research on team tasks--synthetic task environment; AVO: air vehicle operator; PLO: payload operator; DEMPC: data exploitation, mission planning, and communications; ACT-R: adaptive control of thought-rational; sec: seconds; ANOVA: analysis of variance     

Profiling hospitals based on emergency readmission: a multilevel transition modelling approach

Emergency readmission is seen as an important part of the United Kingdom government policy to improve the quality of care that patients receive. In this context, patients and the public have the right to know how well different health organizations are performing. Most methods for profiling estimate the expected numbers of adverse outcomes (e.g. readmission, mortality) for each organization. A number of statistical concerns have been raised, such as the differences in hospital sizes and the unavailability of relevant data for risk adjustment. Having recognized these statistical concerns, a new framework known as the multilevel transition model is developed. Hospital specific propensities of the first, second and further readmissions are considered to be measures of performance, where these measures are used to define a new performance index. During the period 1997 and 2004, the national (English) hospital episodes statistics dataset comprise more than 5 million patient readmissions. Implementing a multilevel model using the complete population dataset could possibly take weeks to estimate the parameters. To resolve the problem, we extract 1000 random samples from the original data, where each random sample is likely to lead to differing hospital performance measures. For computational efficiency a Grid implementation of the model is developed. Analysing the output from the full 1000 sample, we noticed that 4 out of the 5 worst performing hospitals treating cancer patients were in London. These hospitals are known to be the leading NHS Trusts in England, providing diverse range of services to complex patients, and therefore it is inevitable to expect higher numbers of emergency readmissions.     

Photovoltaic textile structure using polyaniline/carbon nanotube composite materials

In this paper, an investigation of flexible electrodes for photovoltaic textile structures utilizing polymer‐based organic materials is presented. The composite structure consisting of a blend of water dispersible carbon nanotube:polyaniline (CNT:PANI) components with poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was applied to be used as the hole collecting electrode in photovoltaic textile applications. Both photovoltaic textiles and conventional solar cells were fabricated by using a blend of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT):(6,6)‐phenyl C61‐butyric acid methyl ester (PCBM). All devices were characterized by measuring current versus voltage characteristics under AM 1.5 conditions. The nanoscale morphology of the photovoltaic structures was investigated using scanning electron microscopy and atomic force microscopy.     

Cold Spray Deposition of Freestanding Inconel Samples and Comparative Analysis with Selective Laser Melting

Cold spray offers the possibility of obtaining almost zero-porosity buildups with no theoretical limit to the thickness. Moreover, cold spray can eliminate particle melting, evaporation, crystallization, grain growth, unwanted oxidation, undesirable phases and thermally induced tensile residual stresses. Such characteristics can boost its potential to be used as an additive manufacturing technique. Indeed, deposition via cold spray is recently finding its path toward fabrication of freeform components since it can address the common challenges of powder-bed additive manufacturing techniques including major size constraints, deposition rate limitations and high process temperature. Herein, we prepared nickel-based superalloy Inconel 718 samples with cold spray technique and compared them with similar samples fabricated by selective laser melting method. The samples fabricated using both methods were characterized in terms of mechanical strength, microstructural and porosity characteristics, Vickers microhardness and residual stresses distribution. Different heat treatment cycles were applied to the cold-sprayed samples in order to enhance their mechanical characteristics. The obtained data confirm that cold spray technique can be used as a complementary additive manufacturing method for fabrication of high-quality freestanding components where higher deposition rate, larger final size and lower fabrication temperatures are desired.     

Tensile Bond Strength of a Highly Cross-Linked Denture Tooth to the Compression-Molded and Injection-Molded Denture Base Polymers

This study compared tensile bond strengths between conventional compression-molded heat (HC)-, auto (AP)-, and microwave-polymerized (MC) poly(methyl methacrylate)-based denture resins and a relatively new injection-molded, microwave-polymerized polyurethane based resin (MI) bonded to a highly cross-linked denture tooth. In the first part of the experiments, denture teeth were used as received. In the second part, they were treated with dichloromethane to see its effect on bonding of conventional denture bases (HCS and APS). Bond strength was tested in tension according to ADA specification No.15. The results showed that the HC group failed cohesively because of higher interface bonding (49.95 MPa) compared with those of the others (AP: 25.41 MPa; MC: 22.06 MPa; MI: 20.02 MPa). The application of dichloromethane improved bond strengths of HCS and APS groups (60.61 and 32.03 MPa, respectively). It was suggested that dichloromethane could be applied on the denture teeth ridge lap area prior to denture base processing to enhance adhesion between the tooth/resin.