钢坯修磨金属切除率数学模型的研究

从分析修磨过程运动学和单个磨粒切削入手,建立了磨削深度与磨削过程诸参数(如工艺、材料性能、砂轮性能等)的关系表达式,从而建立起金属切除率与各单项参数的定量关系,为改善或提高修磨效率和修磨过程控制提供了有意义的根据。理论分析与实验结果吻合良好。     

铝电解电容器用橡皮塞中铁的测定

主要研究了用硫氰酸钾作显色剂，用分光光度法测定橡皮塞中铁含量的方法。并对国产和进口橡皮塞做了比较，为铝电解电容器质量水平的提高提供一条新思路。     

A Study of The Moisture-Uptake Kinetics of a Hygroscopic Pharmaceutical Powder

The moisture-uptake kinetics of a hygroscopic powder, sodium heparin contained in a cylindrical container, was determined using a novel moisture-uptake measuring device under a constant convective air flow. The amount of moisture uptake increased with the increase in the relative humidity of the air. The effect of powder-bed height on the total amount of moisture uptake was found to be significant only at the highest relative humidity (75%) evaluated in this study. However, the percent of weight increase of the powder as a result of moisture uptake decreases as the height of the powder bed increases. The results of this study are explained by the dynamic nature of the moisture-uptake process associated with the instrument.     

聚合物分解法制备微波介质陶瓷粉体的研究

对采用聚合物分解（Ｐｅｃｈｉｎｉ）法制备ＭｇＴｉＯ＿３粉体进行了研究。通过对聚合中间产物进行红外光谱分析，研究了聚合物分解法制备ＭｇＴｉＯ＿３陶瓷粉体的聚合反应过程及产物。并与用传统固相反应法制备粉体工艺进行对比．从而证明用聚合物分解法可获得单一ＭｇＴｉＯ＿３相材料．并可降低粉体的煅烧温度。     

扫描近场光学显微镜及其在生物微结构探测上的应用

扫描近场光学显微镜（ＳＮＯＭ）可探测生物体亚波长水平的光学特性，以接近分子水平的分辨率在生物微结构成象、探测和修饰等多方面有巨大的潜力。本文对ＳＮＯＭ的技术方法及其近期的的生物学应用进行了介绍。     

STUDY OF STRUCTURAL FEATURE OF PEAT, LIGNITE AND HUMIC ACID BY SOLID STATEl3C NMR SPECTROSCOPY

Four low rank coals (peat and lignite) and their derived humic acids have been investigated by the^l3C CP/MAS/TOSS NMR technique. The NMR analysis indicates that the peat contains a significant amount of unaltered plant components including cellulose, hemicellulose, lignin, waxes, and resins.

Variable contact time and dipolar dephasing experiments were performed on each sample. The data from above experiments, together with normal CP/MAS integration over selected chemical shift range, were used to derive 12 parameters of carbon skeletal structure including the aromaticity.From the ratio of aromatic bridgehead carbons, f_a^cp, to the aromatic peripheral carbons, f^cpxBp as measured by NMR, the aromatic cluster size may be estimated for each coal.     

Ultrasonic thin-walled tube wave structure for sensing devices

Theoretical and experimental investigations of thin-walled tube acoustic wave devices for gravimetric sensing applications are presented. Integrated sensor configurations have been demonstrated by employing a sol-gel processed thin piezoelectric lead zirconate titanate (PZT) film. This was coated coaxially on stainless steel tubes and interdigital transducers (IDT) fabricated as the transmitter and receiver on the curved tube surfaces. We have observed tube waves along both the axial and circumferential directions between 1 and 6.6 MHz. We have also analyzed the mass sensitivities of different modes propagating along the tubes and shown that high mass sensitivity can be achieved by keeping the tube wall thin     

加强行业技术管理推动材料技术进步

论述了制定《航空工业材料及热工艺技术工作规定》的必要性和航空材料及热工艺的内涵及其重要性，提出确保航空产品质量是航空材料及热工艺技术管理工作的永恒主题，而加强和健全航空材料及热工艺技术管理机构，完善其规章制度则是保证航空产品质量的重要措施，该机构的主要职责是技术立法、技术发展和技术归口。