Motion patterns of Nabesna Glacier (Alaska) revealed by interferometric SAR techniques

Nabesna Glacier is one of the longest land-terminus mountain glaciers in North America. However, its flow has never been studied. We derived detailed motion patterns of Nabesna Glacier in winter and spring 1994–1996 from the synthetic aperture radar (SAR) images acquired by the European Remote Sensing satellites (ERS-1 and ERS-2) using interferometric SAR (InSAR) techniques. Special effort was made to assess the accuracy of the motion estimates, and remove data points with high uncertainty from the motion profiles, enabling us to obtain reliable glacier flow patterns along the highly curved main course of Nabesna Glacier. The results, covering 80 km of the 87 km main course of the glacier, were used to delineate four distinctive sections in terms of spatial and temporal variability of the glacier speed: (1) the upper section where glacier flow was apparently random both temporally and spatially presumably due to development of crevasses; (2) the upper-middle section with relatively steady flow around 0.27 to 0.4 m/day; (3) the middle section with a stable pattern of acceleration from 0.27–0.3 m/day to the maximum about 0.67–0.73 m/day, followed by a general deceleration to 0.17–0.33 m/day before reaching (4) the lower section where the glacier motion was generally slow yet highly variable although uncertainty in the estimation is high. Occurrence of the flow maximum, as well as many local maxima and minima at consistent locations over different periods suggests that the valley geometry affect the overall flow pattern. On top of this general trend, many small-scale temporal/spatial variations in the glacier flow patterns were observed along the glacier, especially in the lower sections. On average, the flow speeds were in the range of 0.3 to 0.7 m/day; however this lacks any measurements of summer flow speeds which are expected to be significantly higher.     

ABB变频器在双馈发电机试验台上的应用

本文介绍了风力发电系统目前存在的技术方案，重点介绍了ABB用于双馈式风力发电系统的变频产品ACS800—67的特性，并对由其构建的发电机测试平台的案例进行了实验分析。     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.     

Mass transfer kinetics of neodymium(III) extraction by calix[4]arene carboxylic acid using a constant interfacial area cell with laminar flow

BACKGROUND: Thermodynamics and kinetics data are both important to explain the extraction property. In order to develop a novel separation technology superior to current extraction systems, many promising extractants have been developed including calixarene carboxylic acids. The extraction thermodynamics behavior of calix[4]arene carboxylic acids has been reported extensively. In this study, the mass transfer kinetics of neodymium(III) and the interfacial behavior of calix[4]arene carboxylic acid were investigated. RESULTS: The rate constant (K_ao) becomes constant when the stirring speed was controlled between 250 rpm and 400 rpm. The activation energy (E_a) was calculated to be 21·41 kJ mol^?1 or 88·17 kJ mol^?1 (dependent on temperature) from the slope of log K_ao against 1000/T. The linear relationship between the specific area and the extraction rate is the characteristic of an interfacial reaction control. The minimum bulk concentration of the extractant necessary to saturate the interface (C_min) is lower than 4·19 × 10^?4 mol L^?1. CONCLUSION: The effect of stirring speed, temperature, and species concentration on the extraction rate demonstrates that the extraction regime depends on the extraction conditions. The chemical reaction control governs the extraction regime at temperatures below 303 K and a mixed control regime occurs when the temperature is between 303 K and 318 K. The probable locale for the chemical reaction is at the liquid–liquid interface and the rate equation is deduced to be: ? d[Nd³⁺]_(a)/dt = k_f[Nd³⁺]_(a)[H₄A]_(o)^0·727[H⁺]_(a)^?0·978. The rate‐controlling step was suggested by the analysis of the experimental results. Copyright © 2008 Society of Chemical Industry     

宣钢1260 m3高炉扩容大修改造设计

宣钢l260m^3高炉大修改造时将炉容扩大到l350m^3，对高炉本体系统设备及冷却系统、自动控制及检测系统进行了全面的改造更新，在炉腹、炉腰及炉身下部高热负荷区域采用铜冷却壁，取消炉身中上部铸铁冷却壁凸台，并采用薄内衬等先进、适用、可靠、成熟的技术。     

N-Type Field-Effect Transistors Using Multiple Mg-Doped ZnO Nanorods

Nanorod field-effect transistors (FETs) that use multiple Mg-doped ZnO nanorods and a SiO₂ gate insulator were fabricated and characterized. The use of multiple nanorods provides higher on-currents without significant degradation in threshold voltage shift and subthreshold slopes. It has been observed that the on-currents of the multiple ZnO nanorod FETs increase approximately linearly with the number of nanorods, with on-currents of ~1 muA per nanorod and little change in off-current (~4times10^-12). The subthreshold slopes and on-off ratios typically improve as the number of nanorods within the device channel is increased, reflecting good uniformity of properties from nanorod to nanorod. It is expected that Mg dopants contribute to high n-type semiconductor characteristics during ZnO nanorod growth. For comparison, nonintentionally doped ZnO nanorod FETs are fabricated, and show low conductivity to compare with Mg-doped ZnO nanorods. In addition, temperature-dependent current-voltage characteristics of single ZnO nanorod FETs indicate that the activation energy of the drain current is very low (0.05-0.16 eV) at gate voltages both above and below threshold     

Optical properties of Nd-doped Ca3(VO4)2 single crystal fiber

Optical absorption and photoluminescence of Ca₃(VO₄)₂ single crystal grown by a floating-zone technique and containing Nd³⁺ ions were investigated. High absorption coefficients and broadening of most absorption bands are present at 300 K, while substructures in some of the same bands can be evidenced at 12 K. Most features of measured spectra are characteristic of random occupation of more than a single Ca²⁺ site by the Nd³⁺ ion and of distortions provoked by different charge compensation mechanisms involving oxygen vacancies promotion in the crystal lattice. Nd³⁺ optical properties were studied by using the Judd-Ofelt theory to calculate the spectral parameters relevant for laser applications.     

Design and analysis of a plug-in robust compensator: an application to indirect-field-oriented-control induction machine drives

It is well known that the system performance for an indirect-field-oriented-control induction motor drive degrades under the variation of rotor resistance and in the presence of external load torque. In this paper, a plug-in robust compensator for speed and position control enhancement of an indirect-field-oriented-control induction machine drive is developed. In the case where a controller for the induction machine already exists or is in operation with satisfactory nominal tracking performance, this plug-in compensator, designed using the H/sub /spl infin// loop-shaping techniques, can be plugged into the existing controller without affecting the already satisfactory nominal tracking performance of the existing closed-loop system but with the capability to improve the system performance under plant parameter variations and in the presence of external disturbances. Simulation and experimental results are given to validate the proposed plug-in robust compensator.     

Decreasing miscibility with greater heterogeneity in ternary polymer blend: poly(cyclohexyl methacrylate), poly(α‐methyl styrene) and poly(4‐methyl styrene)

A ternary blend system comprising poly(cyclohexyl methacrylate) (PCHMA), poly(α‐methyl styrene) (PαMS) and poly(4‐methyl styrene) (P4MS) was investigated by thermal analysis, optical and scanning electron microscopy. Ternary phase behaviour was compared with the behaviour for the three constituent binary pairs. This study showed that the ternary blends of PCHMA/PαMS/P4MS in most compositions were miscible, with an apparent glass transition temperature (T_g) and distinct cloud‐point transitions, which were located at lower temperatures than their binary counterparts. However, in a closed‐loop range of compositions roughly near the centre of the triangular phase diagram, some ternary blends displayed phase separation with heterogeneity domains of about 1 µm. Therefore, it is properly concluded that ternary PCHMA/PαMS/P4M is partially miscible with a small closed‐loop immisciblity range, even though all the constituent binary pairs are fully miscible. Thermodynamic backgrounds leading to decreased miscibility and greater heterogeneity in a ternary polymer system in comparison with the binary counterparts are discussed. © 2003 Society of Chemical Industry