Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

填充母料及其他常用塑料母料

塑料母料对推动塑料工业的迅猛发展起了很大作用，其主要特点是：可以简化生产工艺过程：原料混合方便，混炼质量均匀，提高生产效率及制品性能指标；减少粉尘飞扬及对设备的磨损；降低制品在换色时清洗螺杆的用料量；延长原料储存的保质期等。     

纤维素科学与技术研究进展

本文综述纤维素科学与技术的研究进展。阐述了纤维素结构、纤维素的合成、纤维素液晶、功能纤维素、纤维素溶剂、纤维素裂解和纤维素的废物利用等的最新动态。     

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Ti₃SiC₂ is of interest due to its unique dual nature reminiscent of both brittle ceramics and ductile metals at ambient conditions. In this work, plate-impact experiments have been performed to study the dynamic behavior of Ti₃SiC₂ under shock compression up to 112 GPa by using laser velocity interferometer and electric pin techniques. Hugoniot elastic limits (HEL), spall strength, and Hugoniot equations of state have been obtained based on measured particle velocity profiles and shock wave velocities. The ratio of spall strength to HEL for Ti₃SiC₂ is larger than brittle ceramics but smaller than metals. This result indicates that the dual nature of Ti₃SiC₂ remains at least up to 10 GPa. On the other hand, the linearity of the Hugoniot equation of state, $D=6.9\text{0}1(22)+1.153(53)u_{\text{p}}$, suggests that the initial structure of Ti₃SiC₂ should be stable up to 112 GPa, in contrast to the result reported by Jordan et al. [J. Appl. Phys., 93 (2003) 9639].     

复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007     

锆莫来石材料的反应烧结机制和显微结构特征

研究了用锆英石和工业氧化铝合成锆莫来石材料的反应烧结过程和显微结构。结果表明，添加适量ＭｇＣｌ２·６Ｈ２Ｏ可以促进反应烧结进程。锆英石大颗粒完全分解以后形成ＺｒＯ２聚集体，结构中出现封闭气孔可能与ＺｒＯ２聚集体有密切关系。加入ＭｇＣｌ２·６Ｈ２Ｏ后锆莫来石材料显微结构的主要特征：ＺｒＯ２有聚集体和均匀分布两种赋存形式；封闭气孔一般与ＺｒＯ２聚集体相邻。     

湿浸法制备活性组分非均匀分布负载型催化剂过程的计算机模拟

对活性组分非均匀分布的负载型催化剂的湿浸法制备过程进行了计算机模拟,其模拟程度可适用于任意多个活性组分的浸渍。发现单组分浸渍时,通过控制浸渍时间可获得活性组分由薄到厚的蛋壳型分布和均匀分布,但通过预浸渍吸附至一定分布后,再在空白溶液中浸渍洗脱,控制洗脱条件也可获得蛋黄、蛋白型的分布;加入竞争吸附剂,进行双组分及多组分浸渍,通过控制浸渍溶液性质及浸渍时间可获得各种类型的活性组分分布,诸如蛋壳型、蛋白型、蛋黄型和均匀型。通过对制备过程参数(如竞争吸附剂的选择、各组分有效扩散系数、初始浓度、吸脱附速率常数等)与活性组分分布形式之间关系的分析,可实现对任一分布形式的催化剂的制备过程参数的优化。这对实际制备催化剂具有指导意义。     

辣椒疫病菌对氟吗啉的抗药性研究

为了评估氟吗啉的未来抗性风险，以辣椒疫病菌为靶标，通过室内抗性菌株的驯化、筛选，以及紫外线诱变等方法，初步探索了辣椒疫病菌对氟吗啉的抗性情况。结果表明：抗性菌株对氟吗啉的抗性倍数较低，在3.45～11．33，生长速率明显低于野生敏感菌株。由此可见辣椒疫病菌对氟吗啉的抗性风险可能较低。