Simulation Method of Dynamic Characteristics of Turbine Flow Sensor

Computational Fluid Dynamics (CFD) simulation is one of the important methods to study the performance and in-fluencing factors of turbine flow sensors. According to the working characteristics of the turbine flow sensor, the passive simulation method based on the six degrees of freedom (6-DOF) model and dynamic mesh is proposed in this paper. The reliability of the simulation method is verified by steady-state experiments and unsteady-state experiments. The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results, and the deviation between the simulation result and the experiment result is low with a maximum deviation of 2.88%. In the unsteady simulation study, the impeller speed changes with the inlet velocity of the turbine flow sensor, which has a good follow-up. The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.     

Implications from γ-globulin adsorption onto cation exchangers fabricated by sequential alginate grafting and sulfonation

Our previous work proved that high adsorption capacity and uptake rate of lysozyme were achieved on alginate(Alg)-grafted re sin with an ionic capacity(IC) of 240 mmol·L~(-1)(Alg-FF-240).Moreover,the salt-tolerant feature of Alg-FF-230 was improved by using sequential alginate grafting and sulfonation strategy.Inspired by the enhanced adsorption performance of lysozyme,we have herein proposed to investigate the static and dynamic adsorption behaviors of γ-globulin on a series of Alg-grafted resins with different grafting densities and sulfonation degrees.The adsorption ca pacity of γ-globulin decreased with increa sing alginate-grafting density(IC) from 160 to 230 mmol·L~(-1) at 0 mmol·L~(-1) NaCl because of the steric hindrance caused by the alginate-grafting layer.Effects of ionic strength(IS) indicated that the adsorption capacities of the resins with the IC value of 230-370 mmol·L~(-1) were much higher than CM Sepharose FF at 50-100 mmol·L~(-1) NaCl,and the uptake rate of Alg-FF-230 was about twice as much as that of CM Sepharose FF.This work demonstrated the important effects of alginate-grafting layer and IS in γ-globulin adsorption behavior,which would be helpful in the design of Alggrafted resins and the selection of proper IS condition for protein purification.     

Selective preparation of light aromatic hydrocarbons from catalytic fast pyrolysis vapors of coal tar asphaltene over transition metal ion modified zeolites

The catalytic cracking of coal tar asphaltene (CTA) pyrolysis vapors was carried out over transition met-alion modified zeolites to promote the generation of light aromatic hydrocarbons (L-ArHs) in a pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) micro-reactor system.The effects of ultra stable Y(USY),Co/USY and Mo/USY on the selectivity and yield of L-ArHs products and the extent of deoxygena-tion (Edeoxygenation),lightweight (Elightweight) from CTA pyrolysis volatiles were investigated.Results showed that the yields of L-ArHs are mainly controlled by the acid sites and specific surface area of the catalysts,while the deoxygenation effect is determined by theirs pore size.The Elightweight of CTA pyrolysis volatiles over USY is 9.65％,while the Edeoxygenation of CTA pyrolysis volatiles over Mo/USY reaches 20.85％.Additionally,the modified zeolites (Mo/USY and Co/USY) exhibit better performance than USY on L-ArHs production,owing to the synergistic effect of metal ions (Mo,Co) and acid sites of USY.Compared with the non-catalytic fast pyrolysis of CTA,the total yield of L-ArHs obtained over USY (4032 mg·kg-1),Co/USY (4363 mg·kg-1) and Mo/USY (4953 mg·kg-1) were increased by 27.03％,38.19％ and 54.78％,respectively.Furthermore,the possible catalytic conversion mechanism of transition metal ion (Co and Mo) modified zeolites was proposed based on the distribution of products and the characterizations of catalysts.     

Exploring the methods on improving CH4 delivery performance to surpass the Advanced Research Project Ageney-Energy target

CH_4 storage associated with adsorbed natural gas(ANG) technology is an issue attracting great concern.Following the Advanced Research Project Agency-Energy(ARPA-E) targeted deliverable capacity of 315 cm~3·cm~(-3)(STP), hundreds of thousands of materials have been experimentally or theoretically evaluated,while the best results still show a 35% gap from the target. Moreover, recent theoretical research reveals that the target is beyond the possibility that real materials can be designed. To get rid of the awkward situation, we make attempts on investigating the CH_4 delivery performance under other operation conditions. Methods of raising the discharge temperature(to infinite high) or elevating the storage pressure(to 25 MPa) have been proved to show limited effectiveness. In this work, it is found that the ARPA-E target can be achieved by using a decreasing storage temperature strategy. By taking 280 Co RE(computation-ready, experimental) COFs(covalent organic frameworks) as ANG materials, when reduce the storage temperature to 190.6 K, the highest deliverable capacity can reach 392 cm~3·cm~(-3)(STP), and16.1% Co RE COFs can surpass the target. The target is also achievable when storage at 220 K. Structure performance relationships study shows strong correlation between deliverable capacity and void fraction. Hence, 120 hypothetical COFs are generated to ascertain the optimum void fraction. In addition,the performance of 2 D-COFs can be greatly enhanced by increasing the interlayer spacings, e.g. CH_4 deliverable capacity(storage at 190.6 K) of ATFG-COF can be improved from 239 to 411 cm~3·cm~(-3)(STP) when interlayer spacing is enlarged to 1.65 nm.     

Technology for recycling and regenerating graphite from spent lithium-ion batteries

With the annual increase in the amount of lithium-ion batteries (LIBs), the development of spent LIBs recycling technology has gradually attracted attention. Graphite is one of the most critical materials for LIBs, which is listed as a key energy source by many developed countries. However, it was neglected in spent LIBs recycling, leading to pollution of the environment and waste of resources. In this paper, the latest research progress for recycling of graphite from spent LIBs was summarized. Especially, the processes of pretreatment, graphite enrichment and purification, and materials regeneration for graphite recovery are introduced in details. Finally, the problems and opportunities of graphite recycling are raised.     

风电叶片大梁用碳纤维拉挤板材组合式加载压缩(CLC)测试浅析

依据ASTM D6641/D6641M-16《采用组合加载方式(CLC)测定聚合物基复合材料层压板压缩性能试验方法》标准,对风电叶片大梁用碳纤维拉挤板材进行压缩性能测试,通过采用不同类型的加强片制备压缩试样,对所测得的压缩强度、压缩模量和压缩应变的试验结果与失效模式进行分析.结果 表明,采用文中C型加强片制备的压缩试样,测得的压缩强度、压缩模量、压缩应变以及失效模式均较为理想,试验结果重复性较好.     

基于多特征融合的云平台异常点检测方法研究

针对传统云平台异常点检测方法存在准确率低和运算速度慢的问题,提出基于多特征融合的云平台异常点检测方法,构建云平台不同子系统的特征空间优化模型,实现不同子系统之间的特征自动融合.首先设计基于多特征融合的云平台异常点检测算法,对模型约束进行监测分析;然后通过试验验证方法不仅能够进行云平台异常点检测,而且比其他传统方法有更高的准确率和更快的计算速度.     

一种基于阻抗法的CVT介损测量方法研究*

介损是表征CVT运行性能的重要指标,其准确测量与否直接影响着CVT的预试效果.针对介损偏高时的故障诊断和辨识,提出一种基于阻抗法的介损测量方法.仿真结果表明,表征CVT外表面泄漏电流的外阻主要影响介损频率特性的低频段,而内阻主要影响介损频率特性的高频段,因此可通过介损频率曲线的低频和高频段差异对CVT设备进行故障识别,提升运维准确性和效率.     

Mn/Ti-Zr复合氧化物催化苯甲酸甲酯选择性加氢

以硝酸锆和钛酸四丁酯为原料,采用共沉淀法制备Ti-Zr-O氧化物载体,采用浸渍法制备了Mn/Ti-Zr催化剂;采用XRD、N2物理吸附、H2-TPR、NH3-TPD和TG-DTA对Mn/Ti-Zr催化剂进行了表征,并考察了催化剂组成、结构和反应条件对苯甲酸甲酯（MB）加氢性能的影响,以及催化剂的长周期稳定性、失活和再生行为。结果表明：TiO2含量和Mn负载量分别为12% 和8% （二者均以Ti-Zr-O氧化物的质量为基准,下同）时制备的Mn/Ti-Zr催化剂性能最优,该催化剂在θ = 390 ℃, p = 1.0 MPa,n(H2)∶n(MB) = 9∶1和重时空速（WHSV）= 0.5 h-1的优化条件能够实现98.0% 的苯甲酸甲酯转化率和89.7%的苯甲醛和苯甲醇选择性;苯甲酸甲酯加氢反应的活性和选择性分别与Mn/Ti-Zr表面MnOx物种的氧化还原性和催化剂的酸性密切相关。此外,Mn/Ti-Zr催化剂具有良好的结构稳定性,在反应1000 h后仅因积碳而丧失11% 的活性,且轻微失活的催化剂可以通过焙烧恢复其初始活性和选择性。     

Pd催化剂上乙酰丙酸与腈还原胺化制吡咯烷酮类化合物

采用柠檬酸络合法,通过调整CeO2含量(x=5％、10％、20％、30％)(以Al2O3的质量计,下同)制备出一系列xCeO2-Al2O3复合氧化物,以此为载体用沉积-沉淀法制备了Pd负载量(以Al2O3的质量计,下同)为5％的5％Pd/xCeO2-Al2O3催化剂.采用XRD、N2吸附-脱附、TEM、XPS对催化剂的物化性质进行了表征,探讨了催化剂对生物质基乙酰丙酸与腈类化合物"一锅法"还原胺化合成N-取代基-5-甲基-2-吡咯烷酮类化合物的催化性能.结果表明,在温和的反应条件下(90℃、1.5 MPa H2),催化剂5％Pd/10％CeO2-Al2O3上乙酰丙酸与苯甲腈反应5 h,N-苄基-5-甲基-2-吡咯烷酮收率高达87.5％.在该催化剂上,乙酰丙酸(酯)与其他多种腈类化合物反应同样获得了较高的吡咯烷酮类化合物收率(76.3％～87.4％).催化剂5％Pd/10％CeO2-Al2O3循环4次后,活性无明显下降.