PPS的共混改性

简要介绍了聚苯硫醚(PPS)与其他聚合物进行共混改性的研究进展。着重讨论了PPS PA66、PPS PC、PPS PPO等的共混及其性能。此外,展望了PPS合金的发展前景。     

基于四元数和增广矩阵束的MIMO雷达角度估计算法

通过研究多输入多输出（Multiple input and multiple out, MIMO）雷达的角度估计算法,基于收发共址的十字阵MIMO雷达系统,将四元数理论应用到 MIMO雷达角度中,提出了一种新的参数估计算法。通过构造四元数模型,结合增广矩阵束（ Matrix enhancement and matrix pencil, MEMP）方法构造增广矩阵,并证明该矩阵的秩 等于目标总数,且不受目标相干性的影响,结合ESPRIT算法实现了对MIMO相干目标的角度估 计。算法无需谱峰搜索,能够实现参数的自动配对,同时降低了运算复杂度。仿真实验进一 步验证了算法的有效性。     

年产200吨4，4’-二氟二苯甲酮（DFBP）的工业化设计及可行性研究

本文在大量实验数据基础上，对4，4’-二氟二苯甲酮(DFBP)进行了年产200吨规模的工业化设计，从技术关键、工艺流程、设备选材、三废治理及成本核算等方面对DFBP工业化设计的可行性进行了评价，该设计有如下特点：工艺简单、合理，操作稳定、安全，三废治理有效，原材料及设备投资少，见效快，适合工业化大生产。     

热稳定剂二月桂酸二丁基锡合成工艺改进

对新型热稳定剂二月桂酸二丁基锡合成条件进行了研究。根据直接法合成二月桂酸二丁基锡的反应机理,通过改变反应温度、反应时间和配料比,并对实验方法作了一定的改进。当碘丁烷13g,Sn粉3g,四丁基溴化铵0.7g时,反应温度为125～140℃,反应时间为4h,二月桂酸二正丁基锡产量为12.8g,产率为98.8%。分别加入了20mL水和20mL甲烷进行萃取分离后使二月桂酸二正丁基锡最终产率可达到80%以上。     

生物陶瓷内部成孔与贯通方式的研究

多孔羟基磷灰石（HA）陶瓷内部结构满足细胞向内部渗透、迁移、粘附和生长的条件。实验探讨了HA陶瓷内部成孔与孔道连结的机理与技术，采用添加制孔剂和固化纤维2种方法制备系列样品，测算了样品气孔率，并对微观结构进行扫描电镜观察，最终确定可人工调控内部结构的HA陶瓷成孔与贯通技术。     

PC／TPU共混物的流变性能

用毛细管流变仪研究了聚碳酸酯（ＰＣ）及聚碳酸酯／热塑性聚氨酯弹性体（ＰＣ／ＴＰＵ）共混物的流变性能。实验结果表明：ＰＣ熔体粘度对剪切速率（γ）不敏感，而对温度（Ｔ）敏感。温度升高，ＰＣ粘度降低。加入ＴＰＵ大大改善了共混物的流动性能，使共混物的成型加工变得容易进行。当ＴＰＵ含量为４０份时，共混物的熔体粘度出现一极小值。加入不同第三组分对于降低共混物的熔体粘度效果不同，第三组分Ｅ对共混物有增粘作用     

腐植酸类物质凝聚及沉淀特性的研究

通过对不同产地，不同提取方法获得的煤炭腐植酸和经过生物发酵人工合成的生化黄腐酸分别进行铝离子絮凝实验和酸化沉淀实验，发现煤炭腐植酸、腐植酸盐、棕惰酸、黄腐酸都同时具有被铝离子定量絮凝和在酸性条件下定量沉淀的特性，这类物质具有极其相近的化学特性。生化黄腐酸在上述两方面显示出与煤炭腐植酸十分不同的特性。     

The partition coefficients of ethylene between hydrate and vapor for methane + ethylene + water and methane + ethylene + SDS + water systems

The hydrate formation of CH₄+C₂H₄ mixture was studied experimentally in two different cases, with and without the presence of sodium dodecyl sulfate (SDS) in water. The results manifested that the presence of SDS could not only accelerate the hydrate formation process, but also increase the partition coefficient of ethylene between hydrate and vapor drastically. The partition coefficients of ethylene between hydrate and vapor for methane + ethylene + water with the presence of 500 ppm SDS in water were then systematically measured. The experimental temperature ranged from 273.15 to 278.15 K, the pressure ranged from 2.5 to 5.5 MPa, the initial gas-liquid volume ratio ranged from 95 to 240 standard volumes of gas per volume of liquid, and the mole percentage of ethylene in feed gas mixture ranged from 5.28% to 79.36%. The results demonstrated that ethylene could be enriched in hydrate phase and partition coefficients were increased with the presence of SDS in water. This conclusion is of industrial significance; it implies that it is feasible to recover ethylene from gas mixture, e.g., various kinds of refinery gases or cracking gases in ethylene plant, by forming hydrate.     

复合材料光纤应变传感器发展概况

本文简要介绍了国内外复合材料嵌入式光纤应变传感器的发展情况，重点介绍了二涉型、模式型、偏振型和光强型四种尖型光纤应变传感器的研制状况。     

Morphology and properties of blends of polypropylene with ethylene-propylene rubber

Great attention has been paid to the toughening of isotactic polypropylene (PP) in recent years in order to make full use of this plastic. This paper presents the results of our study on the compatibility of PP with ethylene-propylene-diene rubber (EPT), polybutadiene rubber (PB) or styrene-butadiene rubber (SBR) through characterization of the blends' morphology, and on. the morphology and properties of binary blends of PP with EPT (EPT/PP) and ternary blends of PP, EPT, and polyethylene (PE) (EPT/PE/PP). Morphological structure of solution blends and the great improvement in low-temperature impact strength and other properties of the mechanical blends have shown the difference among EPT, PB, and SBR in compatibility with PP, the effectiveness of using EPT as PP's toughening agent, and the effect of EPT on EPT/PP blend as both toughening agent and compatibilizer. Addition of EPT to EPT/PP made interesting changes in morphology but no effect on properties was observed.