气流床水煤浆气化技术的应用现状及开发进展

气流床水煤浆气化是煤高效、洁净利用的一项关键技术。简述了具有代表性的气流床水煤浆气化技术的应用现状及开发进展,并分析了影响水煤浆气化的主要因素,如烧嘴、耐火砖、进料系统、激冷环等,提出了一些改进措施。     

提高磷酸二铵产品质量方法浅析

针对磷酸二铵(DAP)产品养分波动大、含水量偏高、易结块、颜色变化大等缺点,在生产过程中采取了相应的解决措施,如配矿、联产、设备改造、工艺指标调整等,使DAP装置不仅保持了原有的优点,而且产品质量问题也得到了有效解决。养分基本保持在64.0%~64.6%,水分下降到2.1%~2.2%,结块现象较少,颜色也比较统一。     

超滤在明胶生产中的应用

本文研究了超滤在明胶生产中的应用,超滤作为初级浓缩是可行的。同时,对超滤设备、超滤膜与工艺条件作了讨论。     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

高吸水性树脂的性能及应用

综述了高吸水性树脂的性能及其应用，并预测其广阔的开发前景。     

油田联合站油水分离的模糊-PID控制

联合站油水分离过程是将高含水原油处理成为合格产品的重要生产过程，从控制理论角度看，此过程具有多变量、干扰因素复杂、非线性、大滞后、压力与界面强耦合的特点，为了实现此过程的自动控制，本文针对典型的两段式脱水工艺进行了理论分析，通过对人工智能控制经验的总结，确定了模糊-PID控制策略。     

国产脱砷剂及其应用

介绍了石油烃中砷的存在形式 ,石脑油中砷含量及对催化剂的危害 ,分析了脱砷机理 ,阐述了国产脱砷剂的类型、型号、特点 ,以及选用原则与工业应用情况。     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

PET熔体输送系统中熔体温度自动控制方案

在热媒温度控制系统中以熔体温度作为主参数,组成串极调节系统。投入运行后,熔体温度稳定,调节阀动作平稳,效果良好。