Network formation involving epoxide and carboxyl groups

Summary The base catalyzed reaction between epoxide and carboxyl groups was studied using a simple model system phenylglycidyl ether-caproic acid in the presence of triethylamine. The reaction was investigated by mass spectrometry and GPC which provide an overall qualitative and quantitative survey of all the forming reaction products. The addition esterification is followed by etherification and condensation esterification and the main reaction product, monoester, is disproportionated yielding diester and diol. In a polyfunctional system, the latter reaction may cause splitting of the polymer chain and formation of new crosslinks.     

Determination of micromechanical properties of a hen’s eggshell by means of nanoindentation

The work describes the suitability and applicability of the nanoindentation method for the determination of the micromechanical properties of a hen’s eggshell. The values of elastic modulus E were monitored in five different locations along the eggshell’s meridian line. Detailed maps of elastic moduli at particular eggshell cross-sections revealed high variations in local values of E-moduli at individual points, but not significant differences of their means at distant parts of the eggshell. Mean values of E-modulus in different meridian positions did not vary significantly and ranged from 47.4 to 53 GPa. Experimental histograms were created of all elastic moduli showing the frequency of their occurrence and these revealed a rather high variation in E-moduli throughout the cross-section. The probability density function can be characterised by a symmetrical shape and the distribution of E-moduli can be approximated with the Gauss distribution. The nanoindentation technique proved to be a suitable, easy-to-use, and powerful tool for assessing local variations of the mechanical properties of hen’s eggshells.     

Combined compression and simplification of dynamic 3D meshes

We present a new approach to dynamic mesh compression, which combines compression with simplification to achieve improved compression results, a natural support for incremental transmission and level of detail. The algorithm allows fast progressive transmission of dynamic 3D content. Our scheme exploits both temporal and spatial coherency of the input data, and is especially efficient for the case of highly detailed dynamic meshes. The algorithm can be seen as an ultimate extension of the clustering and local coordinate frame (LCF)‐based approaches, where each vertex is expressed within its own specific coordinate system. The presented results show that we have achieved better compression efficiency compared to the state of the art methods. Copyright © 2008 John Wiley & Sons, Ltd.     

Inhibition of Arcobacter butzleri, Arcobacter cryaerophilus, and Arcobacter skirrowii by plant oil aromatics

The inhibitory effect of some plant oil aromatics against three strains of Arcobacter butzleri, two strains of Arcobacter cryaerophilus, and one strain of Arcobacter skirrowii was evaluated. When MICs were determined using the broth macrodilution method, cinnamaldehyde was most inhibitory followed by thymol, carvacrol, caffeic acid, tannic acid, and eugenol (P < 0.001). Sublethal concentrations of the three most potent plant oil aromatics also were examined. Overall, cinnamaldehyde was the most bacteriostatic against all arcobacters tested except A. butzleri when these strains were exposed to the MIC25 of this aromatic aldehyde. The bacteriostatic activities of thymol and carvacrol were concentration and species dependent.     

Infrared Image Processing to Guide the Identification of Damage and Dissipative Mechanisms in 3D Layer-to-Layer Woven Composites

Applied Composite Materials - This article discusses techniques that aim at facilitating the identification of dissipative mechanisms activated in woven composites under cyclic loadings. The focus...     

Processing of AlSi9Cu3 alloy by selective laser melting

ABSTRACT

Additive manufacturing of Al-alloys allows the production of components with a complicated structured shape, geometry composed by lattice structures, internal cooling, etc. The portfolio of Al-alloys for metal additive manufacturing is still under development and is strongly limited, compared to the conventional technology. The alloy AlSi9Cu3 is used in many applications, but its processing details are still missing. The main aim of this paper is to describe the laser process parameters for AlSi9Cu3, processed by SLM technology and manufactured from two powders of different shapes and particle sizes. The tested process parameters were laser power, laser speed, and hatch distance in the range of 100–400?W, 200–1500?mm?·?s^?1 and 90–150?µm. These were tested using a single-track and cube test. Microstructure, mechanical properties and the fatigue of SLM samples were analysed and compared with as-casted material.     

Formation of nanostructured epoxy networks containing polyhedral oligomeric silsesquioxane (POSS) blocks

Nanostructured epoxy networks, based on DGEBA and poly(oxypropylene)diamine (Jeffamine D), containing nano-sized inorganic blocks, polyhedral oligomeric silsesquioxanes (POSS), were investigated. The POSS were incorporated in the network as crosslinks or as pendant units by using octa- or monoepoxy-POSS monomers, respectively, as well as diepoxides with pendant POSS. The authors focused on investigating the relationship between the network formation process and the final product properties. The reactivity of the epoxy-functional POSS monomers, the hybrid systems' time of gelation, the gel fractions and the phase structure of the networks were determined using ¹H or ¹³C NMR spectroscopy, chemorheology experiments, sol-gel analysis and transmission electron microscopy (TEM).All the POSS epoxides tested show a reduced reactivity if compared to their respective model compounds due to sterical crowding in the neighborhood of their functional groups and due to reduced epoxy group mobility. The incorporation of pendant POSS into networks of the type DGEBA-Jeffamine D-monoepoxy-POSS hence took place only in the late reaction stage. Together with the high tendency of these POSS to aggregation, the kinetics favors the formation of small nano-phase-separated POSS domains, which act as physical crosslinks due to their covalent bonds to the organic matrix. At POSS loadings higher than 70%, topological constraint by POSS leads to a strongly reduced elastic chain mobility, thus additionally strongly reinforcing the networks. The network build-up and gelation of the octaepoxy-POSS-Jeffamine D system were slow compared to the reference DGEBA-Jeffamine D network due to a low octaepoxy-POSS reactivity and due to its strong tendency to cyclization reactions with primary amines. The topology of the amino groups is shown to be very important. In contrast to monoepoxy-POSS, the octaepoxy-POSS becomes dispersed as oligomeric junctions (purely chemical crosslinks) of the network in the cured product. The octaepoxide's reinforcing effect is small and is given only by its high functionality and not by its inorganic nature. The functionality effect is reduced by the mentioned cyclizations.     

Polyamic acid: nanoprecipitation and electrophoretic deposition on porous supports

Polyamic acid (PAA, a precursor of polyimide) was synthesized from 4,4′-oxydiphthalic anhydride and 4,4′-oxydianiline. PAA, dissolved in dimethylsulfoxide (DMSO), was precipitated into colloidal particles after its injection into acetone. The resulting particle size distribution was found to depend on aging time of PAA solutions, their concentration, and the manner in which the solutions were mixed with acetone. PAA particles of any size down to 10 nm appeared to be achievable by decreasing the acetone/DMSO ratio. Particles in DMSO/acetone suspensions were found to have a significant negative zeta potential. Therefore, there was no need to add organic bases to form PAA anions, in contrast to all previously published studies on the PAA electrodeposition. EPD was performed onto porous stainless-steel or alumina disks, which are suitable supports (reinforcements) for membranes. The slow evaporation of DMSO residue yielded dried polymer layers, comprised of 50–100 nm PAA globules. The outer surface of layers was usually covered with a very thin, continuous PAA skin. Such supported PAA layers—after a simple imidization step via a heat treatment—could be applied as thermally resistant membranes for gas separation.     

Understanding the structural origin of crystalline phase transformations in nepheline (NaAlSiO4)‐based glass‐ceramics

Nepheline (Na₆K₂Al₈Si₈O₃₂) is a rock‐forming tectosilicate mineral which is by far the most abundant of the feldspathoids. The crystallization in nepheline‐based glass‐ceramics proceeds through several polymorphic transformations — mainly orthorhombic, hexagonal, cubic — depending on their thermochemistry. However, the fundamental science governing these transformations is poorly understood. In this article, an attempt has been made to elucidate the structural drivers controlling these polymorphic transformations in nepheline‐based glass‐ceramics. Accordingly, two different sets of glasses (meta‐aluminous and per‐alkaline) have been designed in the system Na₂O–CaO–Al₂O₃–SiO₂ in the crystallization field of nepheline and synthesized by the melt‐quench technique. The detailed structural analysis of glasses has been performed by ²⁹Si, ²⁷Al, and ²³Na magic‐angle spinning — nuclear magnetic resonance (MAS NMR), and multiple‐quantum MAS NMR spectroscopy, while the crystalline phase transformations in these glasses have been studied under isothermal and non‐isothermal conditions using differential scanning calorimetry (DSC), X‐ray diffraction (XRD), and MQMAS NMR. Results indicate that the sequence of polymorphic phase transformations in these glass‐ceramics is dictated by the compositional chemistry of the parent glasses and the local environments of different species in the glass structure; for example, the sodium environment in glasses became highly ordered with decreasing Na₂O/CaO ratio, thus favoring the formation of hexagonal nepheline, while the cubic polymorph was the stable phase in SiO₂–poor glass‐ceramics with (Na₂O+CaO)/Al₂O₃ > 1. The structural origins of these crystalline phase transformations have been discussed in the paper.     

Emerging and re-emerging diseases of agricultural importance: why local perspectives matter

This paper examines local farmers’ perspectives about emerging and re-emerging infectious diseases (EIDs) of humans, crops and livestock and their impact on household food security in the Tanzania-Uganda interface ecosystem to the west of Lake Victoria. While it is increasingly accepted that such an approach could yield vital information not only regarding the extent of the impact of EIDs but also on practical strategies for their control, recent studies have examined only a narrow part of the disease-food security spectrum, often lacking a clear analysis of how local people conceptualise the co-occurrence, interactions and impact on food security of multiple plant, animal and human disease afflictions. Findings of the present study reveal that farmers perceive diseases as products of wider social, economic, environmental and institutional realities. They employ a wide range of names to describe disease problems and often such labels have nothing in common with the binomial nomenclature used in scientific taxonomy. Frequently, local people’s perceptions of severity of the impact of disease on food security are at variance with views held by experts. Consequently, disease control measures and strategies advocated by experts and policy makers are often not adhered to. This paper reveals that local or emic perspectives on diseases not only convey the sense of how local people feel and think about a particular disease but also how such knowledge shapes their response effort. Finally, the paper argues for a strategy to harness and incorporate aspects of local perspectives and practices into formal disease control programmes.