Surface geometry of slide bearings after percussive burnishing

A review of literature about the effect of oil pockets on improvement of sliding elements tribological performance as well as about the changes of surface topography during “zero-wear” process is shown. The paper presents also the results of experimental investigations done in the Department of Manufacturing Processes and Production Organisation of Rzeszow University of Technology, connected with the creation of oil pockets on sliding surfaces. In order to simulate a deterministic surface a program for the visualisation of pits was written. The procedures for assessment of the oil pocket size of specific shape and oil pockets coverage are presented. The tendencies of changes of surface topography and oil pockets dimensions during “zero-wear” process are also described.     

Distribution of respiratory droplets in enclosed environments under different air distribution methods

The dispersion characteristics of respiratory droplets are important in controlling transmission of airborne diseases indoors. This study investigates the spatial concentration distribution and temporal evolution of exhaled and sneezed/coughed droplets within the range of 1.0 − 10.0μm in an office room with three air distribution methods, specifically mixing ventilation (MV), displacement ventilation (DV), and under-floor air distribution (UFAD). The diffusion, gravitational settling and deposition mechanism of particulate matter were accounted by using an Eulerian modeling approach with one-way coupling. The simulation results indicate that exhaled droplets up to 10μm in diameter from normal human respiration are uniformly distributed in MV. However, they become trapped in the breathing zone by thermal stratifications in DV and UFAD, resulting in a higher droplet concentration and an increased exposure risk to other room occupants. Sneezed/coughed droplets are more slowly diluted in DV/UFAD than in MV. Low air speed in the breathing zone in DV/UFAD can lead to prolonged human exposure to droplets in the breathing zone.     

Synthesis of copper sulphide nanoparticles in carboxylic acids as solvent

A novel method for the preparation of CuS nanoparticles based on the fast nucleation of the sulphide has been developed. The particles have been synthesized by reaction of thioacetic acid with water and copper carboxylates (acetate, propionate) in the corresponding carboxylic acid (acetic, propionic) as a solvent. The use of carboxylic acids presents several advantages: (i) the hydrolysis of the C-S bond is favoured thus producing a fast CuS supersaturation and a high nucleation rate; (ii) the mobility of the precursor molecules is limited so that nucleation events are favoured with respect to particle growth; (iii) the low dielectric constant of the medium stabilises the nanoparticles dispersion by reducing the critical coagulation concentration. The prepared nanoparticles were investigated by UV-Vis spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy and dynamic light scattering. The nanoparticle suspensions are clear and characterized by a blue-shifted adsorption edge with respect to bulk CuS. Light scattering measurements performed on acetic acid suspensions evidence the formation of monodispersed nanoparticles with an average diameter of about 5 nm.     

Shear Strength of Pre-Cast Prestressed Composite Beams with Discontinuous Connections Made of Cast-in-Place Shear Keys

This work investigates the horizontal and web shear resistance of continuous and discontinuous slab-web connections in pre-cast pre-tensioned bridge systems. The beams were full scale pre-cast pre-tensioned girders and the slabs were made of ordinary reinforced concrete either cast in place, for continuous connections, or pre-cast slabs with holes spaced at 312.5 mm to be set in place, for discontinuous connections. The main variables were the connection type (continuous or discontinuous) and the ratio of the connection steel. From the test results and the numerical analysis performed, a modified stress field for the inclined compressive strut in the truss model is proposed for continuous and discontinuous slab-web connections. The analytical results obtained with the proposed modified stress field in the truss model compared well with the tests results. Design procedures for these types of elements are also discussed.     

Quantification of carbon nanotube induced adhesion of osteoblast on hydroxyapatite using nano-scratch technique

This paper explores the nano-scratch technique for measuring the adhesion strength of a single osteoblast cell on a hydroxyapatite (HA) surface reinforced with carbon nanotubes (CNTs). This technique efficiently separates out the contribution of the environment (culture medium and substrate) from the measured adhesion force of the cell, which is a major limitation of the existing techniques. Nano-scratches were performed on plasma sprayed hydroxyapatite (HA) and HA-CNT coatings to quantify the adhesion of the osteoblast. The presence of CNTs in HA coating promotes an increase in the adhesion of osteoblasts. The adhesion force and energy of an osteoblast on a HA-CNT surface are 17 ± 2 μN/cell and 78 ± 14 pJ/cell respectively, as compared to 11 ± 2 μN/cell and 45 ± 10 pJ/cell on a HA surface after 1 day of incubation. The adhesion force and energy of the osteoblasts increase on both the surfaces with culture periods of up to 5 days. This increase is more pronounced for osteoblasts cultured on HA-CNT. Staining of actin filaments revealed a higher spreading and attachment of osteoblasts on a surface containing CNTs. The affinity of CNTs to conjugate with integrin and other proteins is responsible for the enhanced attachment of osteoblasts. Our results suggest that the addition of CNTs to surfaces used in medical applications may be beneficial when stronger adhesion of osteoblasts is desired.     

Intentional and incidental memory: Order effects in clinical testing.

Clinicians sometimes worry that the administration of intentional memory tests early in a clinical battery might artificially enhance performance on subsequent incidental memory tests, with possible differential effects for younger vs. older adults. Eighty-one healthy adults (ages 30–80) were blindly assigned to 1 of 2 testing conditions (incidental followed by intentional and vice versa). Contrary to the concerns of some, administration of intentional tests prior to incidental tests did not affect performance on any measures, and there was no interaction with age. Order of administration did not affect performance in older or younger adults. (PsycINFO Database Record (c) 2010 APA, all rights reserved)