Mesh结构P/G布线网络层次化快速分析方法

本文提出了一个基于网络划分的P／G布线网络层次化快速分析方法。其中，对于子网运算，通过对Cholesky分解法三角化对称正定阵的图模型分析，并基于Mesh结构网络的自身特点，提出了一个基于图顶点排序的加速子网分析运算策略；并用基于MPI的并行结构实现了P／G布线网络分析的并行运算。     

无源性理论在永磁同步电动机混沌控制中的应用

永磁同步电动机在一定的工作条件下呈现出混沌运动，根据无源性网络理论，设计电动机混沌动力学模型的控制器，将混沌系统等效为无源系统，消除系统中的混沌运动，降低系统自激振动的危害，实现混沌系统的快速稳定。     

Mesh-Tree两级层次结构P/G网布线优化方法

本文采用Mesh-Tree两级层次结构作为P／G网布线拓扑结构，并提出了一个对于该结构的线宽优化方法，使超大型P／G网的布线优化速度大大提高。     

IF板与08Al板的成形性能研究

通过模拟成形性试验，对新型超深冲用IF钢板和传统冲压用08Al钢板的冲压成形性能进行了研究．结果表明：IF板的拉深性能、扩孔性能、胀形性能以及“拉深-胀形”复合性能等均优于08Al板，其中，扩孔性能和平面各向异性的改善最为显著；各项试验中，IF板的成形力普遍小于08Al板。     

环境友好水基润滑添加剂的研究

在脂肪酸分子中引入硼和氮，合成了一种环境友好水基润滑添加剂BNR，并利用红外光谱对其主要官能团进行了表征。通过四球试验机考察了BNR添加剂在水中的抗磨性能与极压性能，用X射线光电子能谱仪对磨痕表面元素进行了分析，探讨了该类添加剂的极压抗磨作用机理。结果表明：硼氮化水基润滑添加剂BNR在水中具有优良的抗磨和减摩性能；其润滑作用机理是由于长链脂肪酸分子的载体作用、硼的缺电子性、氮的高反应活性以及三者的协同作用与摩擦金属表面形成了一层高强度的吸附膜和／或摩擦化学反应膜。     

溶胶-凝胶法制备Li（MoO4）2：Eu及表征

用溶胶-凝胶法制备了平均粒径为2～3μm的小颗粒、高亮度的Li（2-x）（MoO4）2：Eu系列钼酸盐红色荧光体。用XRD、SEM、粒度分析和分子荧光光度计对荧光体进行了表征和研究。常规的固相反应合成Li（2-x）（MoO4）2：Eux系列红色荧光粉需要在900℃以上的高温才能够形成均一的固溶体，而采用溶胶-凝胶法制取，在700℃就可以形成均一的单相Li（2-x）（MoO4）2：Eux，在750℃就可得到发光亮度最高的荧光体。其亮度是常规固相反应于900℃制得的荧光体的124％。采用溶胶-凝胶法制取Li（2-x）（MoO4）2：Eux系列，可以在相当宽的实验条件范围内得到小粒径、窄分布和高亮度的荧光体，具有良好的颗粒形貌。     

开流形的曲率与拓扑

应用比较几何的方法研究了完备非紧且具有特定曲率条件的黎曼流形，证明了在一定Pinching条件限制下，流形具有有限拓扑型或者微分同胚于R^n。     

含V、N无缝钢管表面外折缺陷产生原因的分析

通过对鞍钢生产的部分批号V、N微合金强化无缝钢管及生产该钢管的原料连铸坯和连轧管坯的表面缺陷进行研究，分析了含V、N钢管表面外折缺陷的成因，提出了改善钢管表面质量的方法。采用改进后工艺生产的无缝管，其表面外折废品量大幅度降低。     

Simulating Experiment for Temperature Field of Frozen Subgrade Using Regulation Tubes

The main factors that influence the temperature field of frozen subgrade were analyzed.The experimental equipment for simulating frozen subgrade was built up,and the declining regulating tubes were placed at the foot of the embankment. By means of this equipment two simulating experiments of controlling temperature filed of frozen subgrade were carried out in the laboratory. One method is to collect natural cold energy, and the other one is to collect natural cold energy ccompanied by artificial refrigeration simultaneously. The result indicates that the latter is an effective method for maintaining the stability of the frozen subgrade.     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry