Reactive Robust Routing: Anomaly Localization and Routing Reconfiguration for Dynamic Networks

This paper presents a novel approach to deal with dynamic and highly uncertain traffic in dynamic network scenarios. The Reactive Robust Routing (RRR) approach is introduced, a combination of proactive and reactive techniques to improve network efficiency and robustness, simplifying network operation. RRR optimizes routing for normal-operation traffic, using a time-varying extension of the already established Robust Routing technique that outperforms the stable approach. To deal with anomalous and unexpected traffic variations, RRR uses a fast anomaly detection and localization algorithm that rapidly detects and localizes abrupt changes in traffic flows, permitting an accurate routing adaptation. This algorithm presents well-established optimality properties in terms of detection/localization rates and localization delay, which allows for generalization of results, independently of particular evaluations. The algorithm is based on a novel parsimonious model for traffic demands which allows for detection of anomalies using easily available aggregated-traffic measurements, reducing the overheads of data collection.     

水下无线传感器网络的研究进展

随着世界各国对海洋权益的日益重视、发展海洋经济热潮的兴起和陆地无线传感器网络研究的迅速发展,水下无线传感器网络的研究已经成为新的研究热点.首先对水下传感器网络通信技术、传感器网络节点、网络体系结构和水下声学传播特征作了介绍;进而重点对物理层、数据链路层、网络层、传输层、跨层设计、网络信息处理技术、水下定位和仿真平台8个方面的研究进展作了系统的综述;最后介绍了国内外主要研究机构的情况,并讨论了水下无线传感器网络研究存在的一些问题和需要进一步研究的方向.     

Optimization of forging processes using Finite Element simulations

During the last decades, simulation software based on the Finite Element Method (FEM) has significantly contributed to the design of feasible forming processes. Coupling FEM to mathematical optimization algorithms offers a promising opportunity to design optimal metal forming processes rather than just feasible ones. In this paper Sequential Approximate Optimization (SAO) for optimizing forging processes is discussed. The algorithm incorporates time-consuming nonlinear FEM simulations. Three variants of the SAO algorithm—which differ by their sequential improvement strategies—have been investigated and compared to other optimization algorithms by application to two forging processes. The other algorithms taken into account are two iterative algorithms (BFGS and SCPIP) and a Metamodel Assisted Evolutionary Strategy (MAES). It is essential for sequential approximate optimization algorithms to implement an improvement strategy that uses as much information obtained during previous iterations as possible. If such a sequential improvement strategy is used, SAO provides a very efficient algorithm to optimize forging processes using time-consuming FEM simulations.     

Multivariable linearizing control of an industrial sugar crystallization process

This paper illustrates the benefits of a multivariable linearizing control approach applied to an industrial crystallization process. This relevant approach proposes a setpoint tracking for the crystal mass/concentration couple. In this purpose, a model dedicated to last stage crystallization is designed, without consideration of crystal size distribution. The controlled variables, unavailable, are obtained using an extended Luenberger observer. The observer is validated on industrial data and shows good performance in both convergence rate and accuracy. The performance of the proposed linearizing strategy, which application to cane sugar crystallization constitutes a real novelty, is tested via simulation. The good performance in setpoint tracking, even in presence of noise, disturbances and modeling error, allows to consider a significant improvement of the global productivity.     

A modular system for global and local abnormal event detection and categorization in videos

This paper presents a modular system for both abnormal event detection and categorization in videos. Complementary normalcy models are built both globally at the image level and locally within pixels blocks. Three features are analyzed: (1) spatio-temporal evolution of binary motion where foreground pixels are detected using an enhanced background subtraction method that keeps track of temporarily static pixels; (2) optical flow, using a robust pyramidal KLT technique; and (3) motion temporal derivatives. At the local level, a normalcy MOG model is built for each block and for each flow feature and is made more compact using PCA. Then, the activity is analyzed qualitatively using a set of compact hybrid histograms embedding both optical flow orientation (or temporal gradient orientation) and foreground statistics. A compact binary signature of maximal size 13 bits is extracted from these different features for event characterization. The performance of the system is illustrated on different datasets of videos recorded on static cameras. The experiments show that the anomalies are well detected even if the method is not dedicated to one of the addressed scenarios.     

Surface force apparatus for nanorheology under large shear strain

We describe a surface force apparatus designed to probe the rheology of a nanoconfined medium under large shear amplitudes (up to 500 microm). The instrument can be operated in closed loop, controlling either the applied normal load or the thickness of the medium during shear experiments. Feedback control allows us to greatly extend the range of confinement/shear strain attainable with the surface force apparatus. The performances of the instrument are illustrated using hexadecane as the confined medium.     

Using genetic algorithms for early schedulability analysis and stress testing in real-time systems

Reactive real-time systems have to react to external events within time constraints: Triggered tasks must execute within deadlines. It is therefore important for the designers of such systems to analyze the schedulability of tasks during the design process, as well as to test the system's response time to events in an effective manner once it is implemented. This article explores the use of genetic algorithms to provide automated support for both tasks. Our main objective is then to automate, based on the system task architecture, the derivation of test cases that maximize the chances of critical deadline misses within the system; we refer to this testing activity as stress testing. A second objective is to enable an early but realistic analysis of tasks' schedulability at design time. We have developed a specific solution based on genetic algorithms and implemented it in a tool. Case studies were run and results show that the tool (1) is effective at identifying test cases that will likely stress the system to such an extent that some tasks may miss deadlines, (2) can identify situations that were deemed to be schedulable based on standard schedulability analysis but that, nevertheless, exhibit deadline misses.

SUPPRESSION OF PERIOD DOUBLING CHATTER IN HIGH-SPEED MILLING BY SPINDLE SPEED VARIATION

Spindle speed variation is a well known technique to suppress regenerative machine tool vibrations, but it is usually considered to be effective only for low spindle speeds. In the current paper, spindle speed variation is applied to the high speed milling process, at the spindle speeds where the constant speed cutting results in period doubling chatter. The stability analysis of triangular and sinusoidal shape variations is made numerically with the semi-discretization method. It is shown that the milling process can be stabilized by increasing the amplitude of the spindle speed variation, while the frequency of the variation has no significant effect on the dynamic behaviour. The results are validated by experiments. Based on the analysis of the machined workpieces, it is shown that the surface roughness can also be decreased by the spindle speed variation technique.     

Tracking mobile users in wireless networks via semi-supervised colocalization

Recent years have witnessed the growing popularity of sensor and sensor-network technologies, supporting important practical applications. One of the fundamental issues is how to accurately locate a user with few labeled data in a wireless sensor network, where a major difficulty arises from the need to label large quantities of user location data, which in turn requires knowledge about the locations of signal transmitters or access points. To solve this problem, we have developed a novel machine learning-based approach that combines collaborative filtering with graph-based semi-supervised learning to learn both mobile users' locations and the locations of access points. Our framework exploits both labeled and unlabeled data from mobile devices and access points. In our two-phase solution, we first build a manifold-based model from a batch of labeled and unlabeled data in an offline training phase and then use a weighted k-nearest-neighbor method to localize a mobile client in an online localization phase. We extend the two-phase colocalization to an online and incremental model that can deal with labeled and unlabeled data that come sequentially and adapt to environmental changes. Finally, we embed an action model to the framework such that additional kinds of sensor signals can be utilized to further boost the performance of mobile tracking. Compared to other state-of-the-art systems, our framework has been shown to be more accurate while requiring less calibration effort in our experiments performed on three different testbeds.     

PIXHAWK: A micro aerial vehicle design for autonomous flight using onboard computer vision

We describe a novel quadrotor Micro Air Vehicle (MAV) system that is designed to use computer vision algorithms within the flight control loop. The main contribution is a MAV system that is able to run both the vision-based flight control and stereo-vision-based obstacle detection parallelly on an embedded computer onboard the MAV. The system design features the integration of a powerful onboard computer and the synchronization of IMU-Vision measurements by hardware timestamping which allows tight integration of IMU measurements into the computer vision pipeline. We evaluate the accuracy of marker-based visual pose estimation for flight control and demonstrate marker-based autonomous flight including obstacle detection using stereo vision. We also show the benefits of our IMU-Vision synchronization for egomotion estimation in additional experiments where we use the synchronized measurements for pose estimation using the 2pt+gravity formulation of the PnP problem.