Cutting efficiency loss of root canal instruments due to bulk plastic deformation, surface damage, and wear

Cutting efficiency loss of #15 H-type and K-type files was studied as a function of bulk plastic deformation and cutting edge wear. Instrumentation was done by purely extractive filing, without any significant torsional and/or bending strain. Cutting efficiency variations were assessed by means of cutting force measurement, while absolute cutting efficiency was obtained through three-dimensional scanning stylus profilometry. Bulk plastic deformation-induced flute modifications may lower the cutting efficiency of H-type files by approximately 50%. For this instrument special care is required in tip and flute machining to avoid in vivo breakage. On the contrary, within the normal life-span of an instrument of approximately 100 strokes cutting edge wear is seen to be negligible. The existence of such wear is "inferred" indirectly from a 10% drop in extraction efficiency.     

Microbiological survey of a South African poultry processing plant

Bacterial populations associated with poultry processing were determined on neck skin samples, equipment surfaces and environmental samples by replicate surveys. Aerobic plate counts, Enterobacteriaceae counts, Enterobacteriaceae counts and Pseudomonas counts were performed by standard procedures and the prevalence of Listeria, presumptive Salmonella and Staphylococcus aureus determined. Statistically significant (P < 0.05) increases in counts of all types of bacteria were obtained on product samples as a result of processing. Although bacterial counts on neck skin samples decreased by 0.3 to 0.4 log CFU g-1 after spray washing of carcasses, subsequent spinchilling and packaging of whole carcasses resulted in 0.7 to 1.2 log CFU g-1 increases. Bacterial numbers on equipment surfaces, however, decreased significantly from the "dirty" to the "clean" areas of the abattoir. Transport cages, "rubber fingers", defeathering curtains, shackles and conveyor belts repeatedly showed aerobic plate counts in excess of 5.0 log CFU 25 cm-2. Aerobic plate counts of scald tank and spinchiller water were 2 log CFU ml-1 higher than those of potable water samples. Bacterial numbers of the air in the "dirty" area were higher than those of the "clean" area. Listeria, presumptive Salmonella and Staphylococcus aureus were isolated from 27.6, 51.7 and 24.1% of all product samples, respectively, and Listeria and Staphylococcus aureus were also isolated from selected equipment surfaces.     

Using I2P (Invisible Internet Protocol) Encrypted Virtual Tunnels for a Secure and Anonymous Communication in VANets: I2P Vehicular Protocol (IVP)

Wireless Personal Communications - The Invisible Internet Project (I2P) as a secure protocol uses robust mechanisms and strong algorithms to reinforce the security and the anonymity of the...     

Localized Synthesis of Iron Oxide Nanowires and Fabrication of High Performance Nanosensors Based on a Single Fe2O3 Nanowire

A composed morphology of iron oxide microstructures covered with very thin nanowires (NWs) with diameter of 15–50 nm has been presented. By oxidizing metallic Fe microparticles at 255 °C for 12 and 24 h, dense iron oxide NW networks bridging prepatterned Au/Cr pads are obtained. X‐ray photoelectron spectroscopy studies reveal formation of α‐Fe₂O₃ and Fe₃O₄ on the surface and it is confirmed by detailed high‐resolution transmission electron microscopy and selected area electron diffraction (SAED) investigations that NWs are single phase α‐Fe₂O₃ and some domains of single phase Fe₃O₄. Localized synthesis of such nano‐ and microparticles directly on sensor platform/structure at 255 °C for 24 h and reoxidation at 650 °C for 0.2–2 h, yield in highly performance and reliable detection of acetone vapor with fast response and recovery times. First nanosensors on a single α‐Fe₂O₃ nanowire are fabricated and studied showing excellent performances and an increase in acetone response by decrease of their diameter was developed. The facile technological approach enables this nanomaterial as candidate for a range of applications in the field of nanoelectronics such as nanosensors and biomedicine devices, especially for breath analysis in the treatment of diabetes patients.     

Paper‐Derived Ferroelectric Ceramics: A Feasibility Study

Preceramic paper may serve as a preform to manufacture single sheet as well as multilayer porous ferroelectric ceramic products. In this article, the authors discuss the formation, microstructure, and properties of preceramic papers highly loaded with BaTiO₃ filler ranging from 70 to 80 vol% and their conversion into ceramic materials. In order to increase the density of the single sheets, post calendering is applied. These sheets are used for the fabrication of multilayer ceramics using warm lamination technique. After binder burnout and sintering up to 1300 °C for 2 h in air, porous paper‐derived multilayer BaTiO₃ is obtained. The effect of ceramic filler content and calendering on the residual porosity in sintered samples is studied. Furthermore, the influence of porosity on the microstructure, mechanical, dielectric, and piezoelectric properties of the sintered BaTiO₃ ceramics is investigated.

     

FRC measurement in intensive care patients. A definition of standards

Determination of Functional Residual Capacity (FRC) can be performed through washout methods, indicator gas dilution or bodyplethysmography. Some of these techniques have been adapted for use in intensive care patients whilst being mechanically ventilated. However, most measurement setups are bulky, cumbersome to use and their running costs are high. Hence FRC measurement has not become a routine method in intensive care although it offers considerable advantages in the management of ventilated patients such as the determination of "best PEEP", the detection of progressive alveolar collapse in the course of acute lung injury and during weaning from mechanical ventilation. Up to now most efforts to improve and simplify FRC measurement were made at the expense of accuracy. An ideal method ought to be accurate, easy to handle and cost-effective. It should supply not only FRC data but also information about intrapulmonary gas distribution and dead space. These demands can be met using modern data acquisition software. The pros and cons of all methods available for FRC measurement are discussed in view of their suitability for intensive care patients. A conventional nitrogen washout using emission spectroscopy for measurement of nitrogen concentration gives satisfying exact values for the determination of the parameters mentioned above. The measurement error can be lowered under 5% by special corrections for flow and nitrogen signal (delay and rise times, changes of gas viscosity). For flow measurement a normal pneumotachograph can be used. Using a laptop computer for data acquisition the bed-side monitor fulfills most of the demands in intensive care. It is then also possible to measure indices of intrapulmonary gas distribution such as Alveolar Mixing Efficiency and Lung Clearance Index.     

Ellipsometry on sputter-deposited tin oxide films: optical constants versus stoichiometry, hydrogen content, and amount of electrochemically intercalated lithium

Tin oxide thin films were deposited by reactive radio-frequency magnetron sputtering onto In(2)O(3):Sn-coated and bare glass substrates. Optical constants in the 3002500-nm wavelength range were determined by a combination of variable-angle spectroscopic ellipsometry and spectrophotometric transmittance measurements. Surface roughness was modeled from optical measurements and compared with atomic-force microscopy. The two techniques gave consistent results. The fit between experimental optical data and model results could be significantly improved when it was assumed that the refractive index of the Sn oxide varied across the film thickness. Varying the oxygen partial pressure during deposition made it possible to obtain films whose complex refractive index changed at the transition from SnO to SnO(2). An addition of hydrogen gas during sputtering led to lower optical constants in the full spectral range in connection with a blueshift of the bandgap. Electrochemical intercalation of lithium ions into the Sn oxide films raised their refractive index and enhanced their refractive-index gradient.     

Phantom study of optimization of spiral-CT and 3D reconstruction of the tracheobronchial system

PURPOSE: To optimise three-dimensional spiral CT of the tracheobronchial tree using adequate acquisition and reconstruction parameters for spiral CT of the chest. MATERIAL AND METHODS: Qualitative and quantitative assessment of different 3 D reconstructions of two test objects of the tracheobronchial tree depending on section thickness, reconstruction interval, pitch, and reconstruction algorithm used in spiral CT (Siemens, Somatom plus S) of the chest. The frequency of volume and stairstep artifacts was evaluated. The 3 D reconstructions were generated using a seeded VOI-technique (Allegro, ISG). RESULTS: Reduction of artifacts was achieved by decreasing section thickness. Increasing overlap of source images, lowering the pitch factor, and application of the reconstruction algorithm "slim". Section thickness was the single most important factor which was mainly responsible for the occurrence of volume artifacts. Stairstep artifacts were primarily influenced by the reconstruction interval. CONCLUSION: Spiral CT with a section thickness > 4 mm is not adequate for 3 D reconstructions of the tracheobronchial tree. Overlapping source images with a pitch of 1 and the reconstruction algorithm "slim" can be recommended to reduce artifacts.