纳米碳酸钙制备过程中添加剂作用机理探讨

采用鼓泡碳化法 ,在最佳反应温度、反应物浓度的条件下 ,考察了添加剂对产物形状及粒径大小的影响 ,得到了直径为 2 0～ 30nm、长径比在 2 0左右且分散性能良好的针状纳米碳酸钙 ,并对添加剂作用机理进行了分析。     

Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

A network management architecture for robust packet routing in meshoptical access networks

We describe an architecture for an optical local area network (LAN) or metropolitan area network (MAN) access. The architecture allows for bandwidth sharing within a wavelength and is robust to both link and node failures. The architecture can be utilized with an arbitrary, link-redundant mesh network (node-redundancy is necessary only to handle all node failures), and assumes neither the use of a star topology nor the ability to embed such a topology within the physical mesh. Reservation of, bandwidth is performed in a centralized fashion at a (replicated) head end node, simplifying the implementation of complex sharing policies relative to implementation on a distributed set of routers. Unlike a router, however, the head end does not take any action on individual packets and, in particular, does not buffer packets. The architecture thus avoids the difficulties of processing packets in the optical domain while allowing for packetized shared access of wavelengths. We describe the route construction scheme and prove its ability to recover from single link and single node failures, outline a flexible medium access protocol and discuss the implications for implementing specific policies, and propose a simple implementation of the recovery protocol in terms of state machines for per-link devices     

The Onsager relations analyzed using an ellipsoidal statistical equation

Validity on the well-known Onsager reciprocal relations L ₁₂=L ₂₁ is verified in the kinetic theory of gases taking into account mass and heat transfer near the surface. Using an analytical solution to the ellipsoidal statistical equation (providing for the true Prandtl number), it is demonstrated that the Onsager relations are obeyed, at least to within exponential corrections of the type exp(−1/Kn) in the Knudsen number.     

阻止抬升盆地原油生物降解的深埋灭菌作用

微生物活动造成的原油生物降解作用发生地球中大多数的油藏中，人们认为生物降解作用大大降低油藏中原油的质量，为成功寻找工业油藏，理解地质建造中生物降解作用发生的条件与过程是十分重要的，尽管最近的研究推测微生物活动在温度在150℃仍能有效地发生，但是人们普遍认为在地质时代，有效的石油生物降解作用通常发生在温度低于80℃的储层中，然而奇怪的是在温度低于80℃的储层中，还可发现未降解的原油，本文收集了一些油藏中有关生物降解程度的数据，发现未降角原油局限于埋藏浅的冷盆地，这些盆地曾是地球中更深，更热的部位，后经抬升作用形成的，我们认为这石油储层在深埋过程中，在温度为80－90℃时经历了灭菌作用，使得深部生物圈中降解烃类的生物停止活动，尽管这些储层后期抬升到较冷的部位并再次发生石油充注，也不会发生生物降解作用，表明灭菌后的沉积物不再适合降解烃类的细菌生长。     

Determination of dislocation densities in HCP metals from X-ray diffraction line-broadening analysis

X-Ray diffraction (XRD) line-broadening analysis has been performed on highly textured Zr-2.5Nb specimens which had been deformed in tensile tests to produce well-controlled dislocation structures. An iterative deconvolution method has been applied to extract the broadening function for the material, using as standards, a Zr single crystal and a 0 pct deformed specimen. In both cases, for specific tensile tests, a significant contribution to the basal line braodening was observed, which was clearly not directly related to the dislocation structure generated by the deformation, i.e., so-called c-component dislocations having a component of their Burgers vectors perpendicular to the basal plane. Calculations showed that the extent of basal line broadening cannot be attributed to the secondary effect of strain from a-type dislocations, i.e., dislocations with Burgers vectors parallel with the basal plane. It is concluded that most of the line broadening observed was the result of intergranular strain distributions. These distributions are most prominent for grains oriented with their c-axes perpendicular to the tensile-deformation axis and resulted in basal-plane line broadening even when there were few, if any, c-component dislocations present. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science and Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

International statements and definitions of the precautionary principle

The precautionary principle (PP), according to one of its definitions, says that lack of certainty, given the current scientific and technological knowledge, shall not delay effective and proportionate actions to prevent hazards, taking into account cost-benefit considerations. Rather than being a single principle, a variety of statements of the PP are found in international treaties and other documents. Apart from any specific legal force of the documents, countries (e.g., France) have used these statements as a starting point for their own guidance documents and regulations for addressing specific environmental and health issues, for example regulation of genetically modified organisms. Thus, any discussion of the precautionary principle must address a complex legal and regulatory situation. We briefly review different statements of the PP and important commentary, largely from the European Union. We provide references to the original source documents (many of which are found in English on the World Wide Web).     

Indicators for inspection and maintenance planning of concrete structures

Based on an idea introduced by Benjamin and Cornell (1970. Probability, statistics and decision for civil engineers. New York: McGaw Hill) and previous works by the authors it is demonstrated how condition indicators may be formulated for the general purpose of quality control and for assessment and inspection planning in particular. The formulation facilitates quality control based on sampling of indirect information about the condition of the considered components. This allows for a Bayesian formulation of the indicators whereby the experience and expertise of the inspection personnel may be fully utilized and consistently updated as frequentistic information is collected. The approach is illustrated on an example considering a concrete structure subject to corrosion. It is shown how half-cell potential measurements may be utilized to update the probability of excessive repair after 50 years. Furthermore in the same example it is shown how the concept of condition indicators might be applied to develop a cost optimal maintenance strategy composed of preventive and corrective repair measures.