Applications of non-destructive testing techniques for post-process control of additively manufactured parts

This paper presents an overview on the principle of operation for post-process inspection non-destructive testing (NDT) techniques. The techniques include visual inspection, liquid penetrant testing, magnetic particle testing, eddy current testing, ultrasonic testing, and radiography. The applications of these NDT techniques in additive manufacturing (AM) and their suitability for defects detection of additively manufactured parts are reviewed. The sensitivity, and the advantages and disadvantages of each technique are evaluated. The types of defect, and the detectability of these defects by NDT techniques are assessed. The applicability of each NDT technique for different categories of AM process is discussed. The categories of AM are, namely, material extrusion, powder bed fusion, vat photopolymerisation, material jetting, binder jetting, sheet lamination, and directed energy deposition.     

Plasmon enhancement for Vernier coupled single-mode lasing from ZnO/Pt hybrid microcavities

It is essential to develop a single mode operation and improve the performance of lasing in order to ensure practical applicability of microlasers and nanolasers.In this paper,two hexagonal microteeth with varied nanoscaled air-gaps of a ZnO microcomb are used to construct coupled whispering-gallery cavities.This is done to achieve a stable single mode lasing based on Vernier effect without requiring any complicated or sophisticated manipulation to achieve positioning with nanoscale precision.Optical gain and the corresponding ultraviolet lasing performance were improved greatly through coupling with localized surface plasmons of Pt nanoparticles.The ZnO/Pt hybrid microcavities achieved a seven-fold enhancement of intensity of single mode lasing with higher sidemode suppression ratio and lower threshold.The mechanism that led to this enhancement has been described in detail.     

Fabrication of high-pore volume carbon nanosheets with uniform arrangement of mesopores

Carbon nanosheets with a tunable mesopore size,large pore volume,and good electronic conductivity are synthesized via a solution-chemistry approach.In this synthesis,diaminohexane and graphene oxide (GO) are used as the structural directing agents,and a silica colloid is used as a mesopores template.Diaminohexane plays a crucial role in bridging silica colloid particles and GO,as well as initiating the polymerization of benzoxazine on the surfaces of both the GO and silica,resulting in the formation of a hybrid nanosheet polymer.The carbon nanosheets have graphene embedded in them and have several spherical mesopores with a pore volume up to 3.5 cm3·g-1 on their surfaces.These nuerous accessible mesopores in the carbon layers can act as reservoirs to host a high loading of active charge-storage materials with good dispersion and a uniform particle size.Compared with active materials with wide particle-size distributions,the unique proposed configuration with confined and uniform particles exhibits superior electrochemical performance during lithiation and delithiation,especially during long cycles and at high rates.     

Joint pricing and advertising strategy with reference price effect

Consumers are susceptible to reference price effects when they make purchase decisions for a certain product. Meanwhile, the sales price and advertisement are the determinable factors that have impact on consumers’ reference price which are also fundamental marketing strategies. Therefore, how to determine an appropriate sales price and advertising effort level to maximise firms’ profits is an essential task. A joint pricing and advertising problem for a monopolistic firm with consideration of reference price effect is investigated, where consumer demand rate is price-sensitivity and depends on the gap between the sales price and the reference price in consumers’ mind. An optimisation model is established to maximise the firm’s total profit by making a joint pricing and advertising strategy. The static and dynamic joint strategies are obtained by applying Pontryagin’s maximum principle. Results show that the dynamic strategies dominate the static ones. Furthermore, the dynamic pricing and dynamic advertising strategies are strategic complements. Additionally, the length of the sales period plays a key role in determining the superiority of the two dynamic strategies. Specifically, a relatively short sales period highlights the value of the dynamic advertising while a long sales period strengthens the function of the dynamic pricing.     

Modulation of the wettability of excipients by surfactant and its impacts on the disintegration and release of tablets

Objective: To investigate the modulation of the wettability of excipients by different types of surfactants and its impacts on the disintegration of tablets and drug release.

Materials and methods: The critical micelle concentration (CMC) of surfactants, including sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), dodecyl trimethyl ammonium bromide (DTAB), cetyltrimethyl ammonium bromide (CTAB) and polysorbate (Tween-20 and Tween-80), was obtained using the platinum ring method. Contact angles of surfactant solutions on the excipient compacts and double-distilled water on the mixture of surfactant and the other excipient (magnesium stearate (MgSt) or sodium alginate (SA)) were measured by the sessile drop technique. Besides, surface free energy of excipients was calculated by the Owens method. Finally, the disintegration of tablets and in vitro dissolution testing were performed according to the method described in USP.

Results and discussion: The wettability of excipients could be enhanced to different extent with low concentration of surfactant solutions and maintained stable basically after CMC. For MgSt (hydrophobic excipient), the shorter the hydrophobic chain (C₁₂, including SDS and DTAB), the better the wettability with the addition of surfactant in the formulation, leading to the shorter disintegration time of tablets and higher drug release rate. In contrast, the wettability of SA (hydrophilic excipient) was reduced by adding surfactant, resulting in the longer disintegration time of tablets and lower release rate.

Conclusion: The modulation of the wetting of pharmaceutical excipients by surfactant had changed the disintegration time of tablets and drug release rate to a greater extent.     

Formal Specification and Quantitative Analysis of a Constellation of Navigation Satellites

Navigation satellites are a core component of navigation satellite‐based systems such as Global Positioning System, Global Navigation Satellite System and Galileo, which provide location and timing information for a variety of uses. Such satellites are designed for operating on orbit to perform tasks and have lifetimes of 10 years or more. Reliability, availability and maintainability analysis of systems has been indispensable in the design phase of satellites in order to achieve minimum failures or to increase mean time between failures and thus to plan maintenance strategies, optimise reliability and maximise availability. In this paper, we present formal models of both a single satellite and a navigation satellite constellation and logical specification of their reliability, availability and maintainability properties, respectively. The probabilistic model checker PRISM has been used to perform automated analysis of these quantitative properties. Copyright © 2014 John Wiley & Sons, Ltd.     

Minimum Setup Minimum Aberration Two‐level Split‐plot Type Designs for Physical Prototype Testing

Although new technologies allow for less effort in prototyping, physical testing still remains an important step in the product development cycle. Well‐planned experiments are useful to guide the decision‐making process. During the design of an experiment, one of the challenges is to balance limited resources and system constraints to obtain useful information. It is common that prototypes are composed of several parts, with some parts more difficult to assemble than others. And, usually, there is only one piece available of each part type and a large number of different setups. Under these conditions, designs with randomization restrictions become attractive approaches. Considering this scenario, a new and additional criterion, minimum setup, to construct split‐plot type designs is presented. Designs with the minimum number of setups of the more difficult parts, which are especially useful for screening purposes in physical prototype testing, are discussed. The use of the proposed criterion combined with minimum aberration for selecting a regular design is shown through a real application in testing car prototypes. As a tool to practitioners, catalogs of selected 32‐run minimum setup minimum aberration split‐split‐plot and split‐split‐split‐plot designs are presented. More complete catalogs are available as Supporting information. Copyright © 2015 John Wiley & Sons, Ltd.