Pullulan–STMP hydrogels: a way to correlate crosslinking mechanism,structure and physicochemical properties

Rheological and swelling properties of hydrogels based on pullulan crosslinked with sodium trimetaphosphate (STMP) are explained according to various polymer and crosslinking agent concentrations using ³¹P-nuclear magnetic resonance study. This method has allowed determining the amount of all the species present in the medium when varying both pullulan and STMP concentrations. We have clearly demonstrated with a good agreement by both ³¹P-NMR and rheology that a critical STMP concentration occurs which is function of pullulan concentration. This typical crosslinking agent concentration delimitates the maximum of gel structure together with the minimum of swelling.     

Accelerated growth of calcium silicate hydrates: Experiments and simulations

Despite the usefulness of isothermal calorimetry in cement analytics, without any further computations this brings only little information on the nucleation and growth of hydrates. A model originally developed by Garrault et al. is used in this study in order to simulate hydration curves of cement obtained by calorimetry with different known hardening accelerators. The limited basis set of parameters used in this model, having a physical or chemical significance, is valuable for a better understanding of mechanisms underlying in the acceleration of C–S–H precipitation. Alite hydration in presence of four different types of hardening accelerators was investigated. It is evidenced that each accelerator type plays a specific role on one or several growth parameters and that the model may support the development of new accelerators. Those simulations supported by experimental observations enable us to follow the formation of the C–S–H layer around grains and to extract interesting information on its apparent permeability.     

Thermal Shock of Layered Ceramic Structures with Crack-Deflecting Interfaces

In this paper the influence of crack-deflecting interlayers on the thermal shock behavior of a ceramic body has been studied. It is observed that the presence of such interlayers inhibits the penetration of cracks into the body and that the magnitude of this effect is much greater than that of internal stresses or of possible increases in fracture energy of the layers, because cracking occurs in a manner different from that expected. A finite difference model has been used to estimate the temperature distribution in the body, from which the crack driving force and its variation with time and penetration into the body have been calculated. It is shown that these observations are consistent with quantitative predictions, if continued crack growth in the laminate requires that the stress in the outermost intact layer is equal to the failure strength of that layer, rather than the crack driving force for the overall penetrating crack being equal to the fracture energy of the material.     

The Crosstalk of Adipose-Derived Stem Cells (ADSC), Oxidative Stress,and Inflammation in Protective and Adaptive Responses

The potential use of stem cell-based therapies for the repair and regeneration of various tissues and organs is a major goal in repair medicine. Stem cells are classified by their potential to differentiate into functional cells. Compared with other sources, adipose-derived stem cells (ADSCs) have the advantage of being abundant and easy to obtain. ADSCs are considered to be tools for replacing, repairing, and regenerating dead or damaged cells. The capacity of ADSCs to maintain their properties depends on the balance of complex signals in their microenvironment. Their properties and the associated outcomes are in part regulated by reactive oxygen species, which mediate the oxidation-reduction state of cells as a secondary messenger. ADSC therapy has demonstrated beneficial effects, suggesting that secreted factors may provide protection. There is evidence that ADSCs secrete a number of cytokines, growth factors, and antioxidant factors into their microenvironment, thus regulating intracellular signaling pathways in neighboring cells. In this review, we introduce the roles of ADSCs in the protection of cells by modulating inflammation and immunity, and we develop their potential therapeutic properties.     

“Arbequina” Olive Oil Composition Is Affected by the Application of Regulated Deficit Irrigation during Pit Hardening Stage

Three new regulated deficit irrigation (RDI) treatments were applied to “Arbequina” olive orchards during pit hardening. Oil quality was determined by measuring analytical parameters for olive oil grading, antioxidant activity, total phenol content, fatty acid profile, volatile compounds profile, and sensory analysis. Oils from RDI were classified as “extra virgin olive oil” and their quality was improved due to their higher antioxidant potential (ABTS⁺ [increased ~75%] and DPPH^˙ [increased ~25%] assays) and phenols (increased ~53%) than control. Concentration of total volatile compounds decreased (~27%) but RDI olive oils showed a more balanced profile (alcohols, aldehydes, and esters). Monounsaturated fatty acid content increased (~5%) and atherogenic and thrombogenic indexes decreased (~8.5%) in RDI olive oil. Regarding sensory analysis, RDI provided more balanced oils with higher fruit aroma than control. Other benefits of RDI olive oil, when compared with oil from full irrigated orchards are reduced use of water and improved functional and sensory quality.     

High‐resolution solid‐state NMR investigation of the filler–rubber interaction: 2. High‐speed [1H] magic‐angle spinning NMR spectroscopy in carbon‐black‐filled polybutadiene

This work investigates the behaviour of elastomeric chains (polybutadienes of identical molecular weight but different microstructures) in the close vicinity of carbon black surfaces in order to attain a better understanding of the structure and properties of interphases. Elastomer–filler interactions are assessed through the study of the thermal properties and NMR relaxation characteristics of the corresponding materials. Three series of samples were compared: pure polymers, raw polymer–filler blends (filler loading ratio: 50 phr) and solvent‐extracted blends (so as to get rid of any polymer which is not under the influence of the solid surface). While differential scanning calorimetry points to the existence of an elastomer fraction which is not detected as undergoing the glass transition, ie is strongly immobilized, [¹H] high‐resolution high‐speed magic‐angle spinning solid‐state NMR provides information on the effect exerted by polymer–filler interactions on the mobility of the various constitutive species of the macromolecular backbone. A systematic study of the evolution of the spectral lines yielded by the samples indicates that 1,2‐polybutadiene moieties have a particular affinity towards the carbon black surface which suggests the occurrence of specific interactions at the elastomer–filler interface. © 2001 Society of Chemical Industry     

Association between plasticized starch and polyesters: Processing and performances of injected biodegradable systems

Different formulations of wheat thermoplastic starch (TPS) have been processed with various plasticizer/starch ratios and moisture contents. The biodegradable polyesters tested are polycaprolactone (PCL), polyester amide (PEA), polybutylene succinate adipate (PBSA) and polybutylene adipate co terephtalate (PBAT). TPS and polyesters are melt blended in different proportions by extrusion and then injected to obtain dumbbell specimens. Various properties are evaluated such as the mechanical properties (tensile and impact tests), and the hydrophilic character with contact angle measurements. Additionally, uniaxial shrinkage is evaluated. Results show that the addition of polyester to TPS increases the dimensional post‐injection stability. Blend modulus values are close to the results of the classical rule of mixture. Elongation at break, resilience values and SEM observations seem to give some indications about the compatibility between both polymeric systems. PBAT and PEA present better results than PCL and PBSA. Contact angle measurement show that we have a drastic increase of the hydrophobic character from 10% of polyester in the blend. The different combinations of TPS and polyesters give a wide range of mechanical behavior for compostable materials, to be developed in specific applications.     

Digitally reconstructing Van Gogh's Field with Irises near Arles part 3: Determining the original colors

In earlier articles, we determined the spatial distributions and concentrations of all pigments used by Van Gogh in his painting Field with Irises near Arles. The colors of some pigments are expected to have changed over time, especially those of chrome yellow, cochineal, and eosin lake. For all pigments in this painting, we made physical paint reconstructions by following historical sources on raw materials and production processes, and we determined their optical properties. We combined this with pigment concentration maps to reconstruct the original colors of the painting digitally. When substituting the reconstruction paints into the calculations, we found that technical‐scientific data was not sufficient to resolve several issues. In those cases, discussions within the broad interdisciplinary team allowed us to make informed decisions. These issues refer to the representation of the sky area, and the original contributions of the red lake pigments to local colors. The digitally reconstructed colors of the painting show that due to discoloring of red lake pigments, the irises in the field have changed from a warm purple to purplish blue, and many pink spots in the field have turned to white. The range of yellows in the field has decreased and partly turned to dark brown. The digital reconstruction gives a better understanding of the color scheme used by Van Gogh when compared to remarks the artist made in letters when describing this painting. Also, the original color composition is seen to be aligned with color theories on which Van Gogh based his work.