给电压比较器添加滞后作用

正正反馈是围绕比较器来分配滞后作用的典型方法,前提是比较器的输出与非逆变输入之间具有电阻路径。正反馈形成两个具有(或呈现)固定值的阈值电压。另外,它们还取决于比较器输出级的饱     

Performance Analysis of Arbitration Policies for SoC Communication Architectures

As technology scales toward deep submicron, the integration of a large number of IP blocks on the same silicon die is becoming technically feasible, thus enabling large-scale parallel computations, such as those required for multimedia workloads. The communication architecture is becoming the bottleneck for these multiprocessor Systems-on-Chip (SoC), and efficient contention resolution schemes for managing simultaneous access requests to the shared communication resources are required to prevent system performance degradation. The contribution of this work is to analyze the impact on multiprocessor SoC performance of different bus arbitration policies under different communication patterns, showing the distinctive features of each policy and the strong correlation of their effectiveness with the communication requirements of the applications. Beyond traditional arbitration schemes such as round robin and TDMA, another policy is considered that periodically allocates a temporal slot for contention-free bus utilization to a processor which needs fixed predictable bandwidth for the correct execution of its time-critical task. The results are derived on a complete and scalable multiprocessor SoC simulation platform based on SystemC, whose software support includes a complete embedded multiprocessor OS (RTEMS). The communication architecture is AMBA compliant, and we exploit the flexibility of this multi-master commercial standard, which does not specify the arbitration algorithm, to implement the explored contention resolution schemes.     

Detection of vesicoureteral reflux using microwave radiometry-system characterization with tissue phantoms

Microwave (MW) radiometry is proposed for passive monitoring of kidney temperature to detect vesicoureteral reflux (VUR) of urine that is externally heated by a MW hyperthermia device and thereafter reflows from the bladder to kidneys during reflux. Here, we characterize in tissue-mimicking phantoms the performance of a 1.375 GHz radiometry system connected to an electromagnetically (EM) shielded microstrip log spiral antenna optimized for VUR detection. Phantom EM properties are characterized using a coaxial dielectric probe and network analyzer (NA). Power reflection and receive patterns of the antenna are measured in layered tissue phantom. Receiver spectral measurements are used to assess EM shielding provided by a metal cup surrounding the antenna. Radiometer and fiberoptic temperature data are recorded for varying volumes (10-30 mL) and temperaturesg (40-46°C) of the urine phantom at 35 mm depth surrounded by 36.5°C muscle phantom. Directional receive pattern with about 5% power spectral density at 35 mm target depth and better than -10 dB return loss from tissue load are measured for the antenna. Antenna measurements demonstrate no deterioration in power reception and effective EM shielding in the presence of the metal cup. Radiometry power measurements are in excellent agreement with the temperature of the kidney phantom. Laboratory testing of the radiometry system in temperature-controlled phantoms supports the feasibility of passive kidney thermometry for VUR detection.     

Physical Mechanisms behind the Field‐Cycling Behavior of HfO2‐Based Ferroelectric Capacitors

Novel hafnium oxide (HfO₂)‐based ferroelectrics reveal full scalability and complementary metal oxide semiconductor integratability compared to perovskite‐based ferroelectrics that are currently used in nonvolatile ferroelectric random access memories (FeRAMs). Within the lifetime of the device, two main regimes of wake‐up and fatigue can be identified. Up to now, the mechanisms behind these two device stages have not been revealed. Thus, the main scope of this study is an identification of the root cause for the increase of the remnant polarization during the wake‐up phase and subsequent polarization degradation with further cycling. Combining the comprehensive ferroelectric switching current experiments, Preisach density analysis, and transmission electron microscopy (TEM) study with compact and Technology Computer Aided Design (TCAD) modeling, it has been found out that during the wake‐up of the device no new defects are generated but the existing defects redistribute within the device. Furthermore, vacancy diffusion has been identified as the main cause for the phase transformation and consequent increase of the remnant polarization. Utilizing trap density spectroscopy for examining defect evolution with cycling of the device together with modeling of the degradation results in an understanding of the main mechanisms behind the evolution of the ferroelectric response.     

Design of Engineered Elastomeric Substrate for Stretchable Active Devices and Sensors

In the field of flexible electronics, emerging applications require biocompatible and unobtrusive devices, which can withstand different modes of mechanical deformation and achieve low complexity in the fabrication process. Here, the fabrication of a mesa‐shaped elastomeric substrate, supporting thin‐film transistors (TFTs) and logic circuits (inverters), is reported. High‐relief structures are designed to minimize the strain experienced by the electronics, which are fabricated directly on the pillars' surface. In this design configuration, devices based on amorphous indium‐gallium‐zinc‐oxide can withstand different modes of deformation. Bending, stretching, and twisting experiments up to 6 mm radius, 20% uniaxial strain, and 180° global twisting, respectively, are performed to show stable electrical performance of the TFTs. Similarly, a fully integrated digital inverter is tested while stretched up to 20% elongation. As a proof of the versatility of mesa‐shaped geometry, a biocompatible and stretchable sensor for temperature mapping is also realized. Using pectin, which is a temperature‐sensitive material present in plant cells, the response of the sensor shows current modulation from 13 to 28 °C and functionality up to 15% strain. These results demonstrate the performance of highly flexible electronics for a broad variety of applications, including smart skin and health monitoring.     

Pressure‐Tunable Ambipolar Conduction and Hysteresis in Thin Palladium Diselenide Field Effect Transistors

Few‐layer palladium diselenide (PdSe₂) field effect transistors are studied under external stimuli such as electrical and optical fields, electron irradiation, and gas pressure. The ambipolar conduction and hysteresis are observed in the transfer curves of the as‐exfoliated and unprotected PdSe₂ material. The ambipolar conduction and its hysteretic behavior in the air and pure nitrogen environments are tuned. The prevailing p‐type transport observed at atmospheric pressure is reversibly turned into a dominant n‐type conduction by reducing the pressure, which can simultaneously suppress the hysteresis. The pressure control can be exploited to symmetrize and stabilize the transfer characteristics of the device as required in high‐performance logic circuits. The transistors are affected by trap states with characteristic times in the order of minutes. The channel conductance, dramatically reduced by the electron irradiation during scanning electron microscope imaging, is restored after an annealing of several minutes at room temperature. The work paves the way toward the exploitation of PdSe₂ in electronic devices by providing an experiment‐based and deep understanding of charge transport in PdSe₂ transistors subjected to electrical stress and other external agents.     

Tunable,Grating-Gated,Graphene-On-Polyimide Terahertz Modulators

An electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth is presented and it is exploited to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal grating used as a gate electrode, with an HfO₂/AlO_x gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. The authors achieve 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9–2.7 THz range. The modulator is then integrated with a multimode THz QCL. By adjusting the modulator operational bandwidth, the authors demonstrate that the graphene modulator can partially compensate the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the operational range, with 98 equidistant optical modes and a spectral coverage ~1.2 THz. This paves the way for applications in the terahertz, such as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and metrological tools for spectroscopy at THz frequencies.